WEST (SEIMART) TV12P CHASSIS VS674GR It's a modular chassis so friendly to service.
Sound unit:687.345.810/A with TDA1190 (Fairchild)
Synch unit:687.305.010/A with ITT TBA950-1
If ampl + Det + demod:687.345.710/B with TDA440
Frame unit: tda1270 -e
Line deflection output + EHT with BU407B AND Line transformer SAREA (Was long time ago a fabricant of transformers & Tv external heavy stabilisator unit)
INTEGRATED circuits are slowly but surely taking over more and more of the circuitry used in television sets even B/W.
The first step, some many years ago now, was to wrap the 6MHz intercarrier sound strip into a neat package such as the TAA350 or TAA570. Then came the "jungle" i.c. which took over the sync separator and a.g.c. operations. Colour receiver decoder circuitry was the next obvious area to be parcelled up in i.c. form, two i.c. decoder and the more sophisticated Philips four i.c. design was coming on the scene. The latter is about to be superseded by a three i.c. version in which the TBA530 and TBA990 are replaced by the new TCA800 which provides chrominance signal demodulation, matrixing, clamping and preamplification, with RGB outputs of typically 5V peak -to -peak.
To improve performance a number of sets adopted a synchronous detector i.c.-the MC1330P -for vision demodulation, which of course overcomes the problem of quadrature distortion. In one monochrome chassis this i.c. is partnered by a complete vision i.f. strip i.c., the MC1352P. In the timebase section the TBA920 sync separator/line generator i.c. has found its way into several chassis was a Texas's SN76544N 07 i.c. which wraps up the sync separator and both the field and line timebase generators has come into use. Several monochrome portables have had in use a high -power audio output i.c. as the field output stage. Audio i.c.s are of course common, and in several chassis the Philips TCA270 has put in an appearance. This device incorporates a synchronous detector for vision demodulation, a video preamplifier with noise inversion and the a.g.c. and a.f.c. circuits. The development to be adopted in a production chassis was that remarkable Plessey i.c., the SL437F, which combines the vision i.f. strip, vision demodulator, a.g.c. system and the intercarrier sound channel.
SGS-Aces Range
Now, from the, at the time, Italian Development Div
ision of SGS-Ates, comes a new range of i.c.s which SGS will set a standard pattern for TV chassis IN 1975. How this range combines to provide a complete colour receiver is shown in Fig. 1. The only sections of the receiver left in discrete component form are the video output stages, the tuner, the a.f.c. circuit and of course the line output stage and power supplies. It will be seen that the colour decoder section is split up as in the Philips three i.c. design. The TDA1150 chrominance and burst channel carries out the same functions as the TBA560, the TDA1140 reference section the same functions as the TBA540 and the TDA1160 chrominance demodulator/matrix- ing i.c. the same functions as Philips's new TCA800. It looks therefore as if this basic decoder pattern could become widely established. The other five i.c.s in the range are common to both colour and monochrome receivers. Particularly interesting are the TDA1170 which comprises a complete monochrome receiver field timebase-for colour set use an output stage using discrete com- ponents is suggested-and the TDA440 which incorporates the vision i.f. strip, vision detector and a.g.c. circuitry. The intercarrier sound i.f. strip is neatly packed away with the audio circuitry in the TDA1190 while the TDA1180 sync separator/line oscillator i.c. is a very similar animal to the now well known TBA920. The fifth i.c., the TBA271, is a stabiliser for the varicap tuner tuning supply. The novel i.c.s in this family then were the TDA 440, TDA1170 and the TDA1190 and we shall next take a closer look at each of these.
Vision IF IC:
The TDA440 vision i.f. strip i.c. is housed in a 16 -pin plastic pack with a copper frame. There is a three -stage vision i.f. amplifier with a.g.c. applied over two stages, synchronous vision demodulator, gated a.g.c. system and a pair of video signal pre amplifiers which provide either positive- or negative - going outputs. Fig. 2 shows the i.c. in block diagram form. It is possible to design a very compact i.f. strip using this device and very ex
act performance is claimed. Note that apart from the tuned circuits which shape the passband at the input the only tuned circuit is the 39.5MHz carrier tank circuit in the limiter/demodulator section. The only other adjustments are the tuner a.g.c. delay potentiometer and a potentiometer (the one shown on the right-hand side) which sets the white level at the demodulator. This of course gives ease of setting up, a help to setmaker and service department alike. For a sensitivity of 200/4V the output is 3.3V peak - to -peak, giving an overall gain in the region of 82 to 85dB. The a.g.c. range is 55dB, a further 30 to 40dB being provided at the tuner. The tuner a.g.c. output is intended for use with a pnp transistor or pin diode tuner unit: an external inverter stage is required with the npn transistor tuner units generally used. discrete component video output stage; in a colour In a monochrome set the output would be fed to a design the output is fed to the chrominance section of the TDA1150 and, via the luminance delay line, to the luminance channel in the TDA1150. Also of course in both cases to the sync separator which in this series of i.c.s is contained in the TDA1180.
Field Timebase IC :
The TDA1170 field timebase i.c. is shown in block diagram form in Fig. 3. The i.c. is housed in a 12 -pin package with copper frame and heat dissipation tabs. It is capable of supplying up to 1.6A peak -to -peak to drive any type of saddle -wound scanning yoke but for a colour receiver it is suggested that the toroidal deflection coil system developed by RCA is used. In this case the i.c. acts as a driver in conjunction with a complementary pair of output transistors. The yoke current in this case is in the region of 6A. The TDA1170 is designed for operation with a nominal 22V supply. It can be operated at up t
o 35V however. A voltage doubler within the i.c. is brought into action during the flyback time to raise the supply to 70V. Good frequency stability is claimed and the yoke current stability with changes in ambient temperature is such that the usual thermistor in series with the field coils is not required. For monochrome receiver use the power supplied to the yoke would be 0-83W for a yoke current of lA peak -to -peak with a 1012 coil impedance and 20V supply. As the power dissipation rating of the i.c. is 2.2W no further heatsink is required. For use in a colour receiver with a toroidal coil impedance of 1.6Ohm the scanning current would be 7A peak -to -peak. The power supplied to the yoke may be as much as 6.5W while the dissipation in the i.c. would be up to 2-3W. In this case a simple heatsink can be formed from a thin copper sheet soldered to the heat fins- an area of about 3-4 sq. in. should be adequate. The sync circuit at the input gives good noise immunity while the difference between the actual and ideal interlace is less than 0-3% of the field amplitude. Because of the high output impedance a relatively low value (1/iF or less) output coupling capacitor can be used. This means that mylar types instead of electrolytics can be used, reducing the problems of linearity and amplitude stability with respect to temperature and ageing. The external controls shown in Fig. 3 are hold, height and linearity (from left to right).
Complete Sound Channel:
The TDA1190 sound channel (see Fig. 4) is housed in a 12 -pin package. Possible radiation pick-up and thermal feedback risks have been avoided by careful layout of the chip. This pack also has a copper frame, with two cooling tabs which are used as the earthing terminals. The built-in low-pass filter overcomes radiation problems and with a response 3dB down at 3MHz allows for a flat amplitude response throughout the audio range: this particular feature will appeal to hi-fi enthusiasts as well since it makes the i.c. a good proposition for f.m. radio reception. The d.c. volume control has a range of 100dB. The external CR circuit (top, Fig. 4) sets the closed - loop gain of the power amplifier. The external feedback c
apacitor network (right) provides a.f. bandwidth and frequency compensation while the CR circuit across the output limits any r.f. which could cause severe audio distortion. The TDA1190 does not require an extra heatsink when operating in normal ambient temperatures-up to 55°C-because of the new technique of soldering the chip directly on to the copper frame that forms part of the external tabs. By doing this, SGS-Ates have reduced the thermal resistance of the device to 12°C per watt. The device can dissipate up to 2.2W at 55°C without using an external heatsink other than the printed circuit pad (about 2 sq. in.) which is soldered to the tab. The output stages of the TDA1190 are in quasi - complementary mode (with patented features), eliminating the need for bootstrap operation without loss of power. The absolute maximum output power is 4.2W with a supply voltage of 24V and a nominal loudspeaker impedance of 1612. At 12V and 812 an output of 1.8W can be achieved. Total harmonic distortion is 0.5% for 1 mV f.m. input and 2W output into 1611 at 24V. Satisfactory operation is possible over a voltage supply range of 9 to 28V, making this versatile i.c. suitable for a wide range of applications. The whole audio circuit can be mounted on a p.c.b. 2in. x 25in. without a heatsink.
Mounting: The complete family of i.c.s has been designed so that it can be incorporated in very small and simple printed circuit modules. The use of a copper frame assists in improving the thermal stability as well as facilitating the mounting of the i.c.s on the board. Where an extra heatsink is required this can be a simple fin added to the mounting tabs or a metal clamp on the top of the pack. SGS claim that insta- bility experienced with conventional layouts in colour receivers has been eliminated provided their recommendations are observed.
Power Supplies:
A simple power supply circuit without sophisticated stabilisation can be used. The requirements are for outputs ranging between 10V and 35V with adequate decoupling and smoothing. It was possible to provide only three supply lines to feed the whole receiver system-plus of course the high- voltage supplies required by the c.r.t. The power supply requirements are simplified since the TDA1170 incorporates a voltage regulator for its oscillator, the TDA440 incorporates a regulator for the vision i.f. strip and the TDA1190 a regulator for the low voltage stages and the d.c. volume control.
The
tuning circuits has a large knob potentiometers tuning system
which use voltage controlled capacitances such as varactor diodes as
the frequency determining elements.
How AFC Circuit Works in B/W Analog Television Receiver:
Push-Button
tuning on u.h.f. while being very convenient often leaves a margin of
mistuning, especially after some wear and tear has occurred on the
mechanism. Even dial tuning can lead to errors due to the difficulty
many people experience in judging the correct point. Oscillator drift
due to temperature changes can also cause mistuning. Automatic frequency
control (a.f.c.) will correct all these faults. The vision carrier when
the set is correctly tuned on u.h.f. is at 39.5MHz as it passes down
the i.f. strip. Thus if at the end of the i.f. strip a discriminator
tuned circuit is incorporated centred on 39.5MHz the discriminator
output will be zero at 39.5MHz and will move positively' one side of
39.5MHz and negatively the other as the tuning drifts. This response is
shown in Fig. 1.
If the tuning is not correct then the
discriminator output is not zero and if this output is applied to change
the reverse bias on a tuning diode mounted in the oscillator section of
the u.h.f. tuner it will correct most of the error. Tuning, varicap or
varactor diodes-to give them a few of their names-are junction diodes
normally operated with reverse bias but not sufficient to bias them into
the breakdown region in which zener diodes operate. The greater the
reverse bias the lower their capacitance: a typical curve, for the
PHILIPS BB105 or STC BA141 tuning diode, is shown in Fig. 2. All diodes e
xhibit
this basic type of characteristic but special diodes have to be used
for u.h.f. because they must not introduce any excessive loss into the
tuned circuits they control. In other words, just as a coil has to have a
good Q so does a varicap diode. Normally, we don't worry about the Q of
a capacitor as it is usually very good. However, a tuning diode is not a
true capacitor. It has, for example, leakage current so the Q of the
diode is a factor which has to be considered. The diode manufacturer
however will have considered these points and if you buy a diode
specified for u.h.f. use you will have no trouble. These points have
been mentioned to clear up any misunderstandings and to show why any old
diode won't do.
Basic AFC SystemTo return to our TV
set, if the oscillator frequency is too high then the vision carrier
frequency will also be too high and in the simple arrangement shown in
Fig. 3 the discriminator will give a negative signal to decrease the
bias on the tuning diode thus increasing its
capacitance
and in turn reducing the oscillator frequency and correcting the error.
Note that in this diagram the reverse bias on the diode is applied to
its cathode. It is therefore positive with respect to ground so that a
negative signal from the discriminator will reduce the positive voltage
on the diode thus reducing its bias and increasing its capacitance. In
this arrangement the diode is biased somewhere near the mid point of its
characteristic by the positive d.c. bias fed into one side of the
discriminator. The discriminator thus adds to or subtracts from this
d.c. bias.
AFC Loop Gain:The amount by which the error
is reduced depends on the gain of the circuit. An estimate of the gain
required must first be made by guessing how much error is likely to be
given by your push -buttons or hand tuning: 1MHz would be an outside
figure as a tuning error of that magnitude would produce a very bad
picture of low definition in one direction and badly broken up in the
other. This error should be reduced to
about
100kHz to be really unnoticeable, indicating a required gain of ten. In
fitting a.f.c. to an existing set some measure- ments should be done as
an experiment before finally deciding on the circuit gain. The first
thing to do is to add the suggested discriminator to the i.f. strip. As
the circuit (Fig. 4) shows a Foster -Seeley type discriminator is used
and with the coils specified and the driver circuit shown it should give
±4V for 0.5MHz input variation.
EXAMPLE of Circuit Description:The
driver stage Tr1 takes a small sample signal from the i.f. strip but
this should be large enough to drive Tr1 into saturation. That is to say
Tr1 is a limiter stage so that the signal amplitude applied to the
discriminator coil L2 stays constant over the normal range of signal
levels. Trl is biased at approximately 7mA which, according to the
original report ("Simple a.f.c. system for 625 -line TV receivers" by P.
Bissmire, PHILIPS Technical Communications, March, 1970), gives the
best limiting performance. C1, R
14
and R3 damp the stage to prevent oscillation. C2 decouples the power
feed and should be close to the circuit. The coil former and can are the
normal ones used for TV sets and so should be easily obtainable: the
former diameter is 5mm. and length 40mm. and winding details are given
in Fig. 5.
The invention being
thus described, it will be obvious that the same may be varied in many
ways. Such variations are not to be regarded as a departure from the
spirit and scope of the invention, and all such modifications as would
be obvious to one skilled in the art are intended to be included within
the scope of the developed apparates both tubes or transistors.
Therefore a stable AFC circuit is developed:
A
superheterodyne receiver having an automatic intermediate
frequency control circuit with means to prevent the faulty
regulation thereof. The receiver has means for receiving a radio
frequency signal and mixing the same with the output of a
superheterodyne oscillator. This produces an intermediate frequency
signal which is coupled to a frequency or phase discriminator to
produce an error signal for controlling the frequency of the
superheterodyne oscillator. A regulation circuit is provided having
an electronic switch to interrupt the feedback circuit when only
unwanted frequencies tend to produce faulty regulation of the
superheterodyne oscillator.
Power supply
is realized with mains transformer and Linear transistorized power
supply stabilizer, A DC power supply apparatus includes a rectifier
circuit which rectifies an input commercial AC voltage. The
rectifier output voltage is smoothed in a smoothing capacitor.
Voltage stabilization is provided in the stabilizing circuits by the
use of Zener diode circuits to provide biasing to control the
collector-emitter paths of respective transistors.A linear regulator
circuit according to an embodiment of the present invention has an
input node receiving an unregulated voltage and an output node
providing a regulated voltage. The linear regulator circuit includes a
voltage regulator, a bias circuit, and a current control device.
In
one embodiment, the current control device is implemented as an
NPN bipolar junction transistor (BJT) having a collector electrode
forming the input node of the linear regulator circuit, an emitter
electrode coupled to the input of the voltage regulator, and a base
electrode coupled to the second terminal of the bias circuit. A
first capacitor may be coupled between the input and reference
terminals of the voltage regulator and a second capacitor may be
coupled between the output and reference terminals of the voltage
regulator. The voltage regulator may be implemented as known to
those skilled in the art, such as an LDO or non-LDO 3-terminal
regulator or the like.
The bias circuit may include a bias
device and a current source. The bias device has a first terminal
coupled to the output terminal of the voltage regulator and a
second terminal coupled to the control electrode of the current
control device. The current source has an input coupled to the first
current electrode of the current control device and an output
coupled to the second terminal of the bias device. A capacitor may
be coupled between the first and second terminals of the bias
device.
In the bias device and current source embodiment, the
bias device may be implemented as a Zener diode, one or more
diodes coupled in series, at least one light emitting diode, or any
other bias device which develops sufficient voltage while
receiving current from the current source. The current source may
be implemented with a PNP BJT having its collector electrode
coupled to the second terminal of the bias device, at least one
first resistor having a first end coupled to the emitter electrode
of the PNP BJT and a second end, a Zener diode and a second resistor.
The Zener diode has an anode coupled to the base electrode of the
PNP BJT and a cathode coupled to the second end of the first
resistor. The second resistor has a first end coupled to the anode
of the Zener diode and a second end coupled to the reference
terminal of the voltage regulator. A second Zener diode may be
included having an anode coupled to the cathode of the first Zener
diode and a cathode coupled to the first current electrode of the
current control device.
A circuit is disclosed for improving
operation of a linear regulator, having an input terminal, an
output terminal, and a reference terminal. The circuit includes an
input node, a transistor, a bias circuit, and first and second
capacitors. The transistor has a first current electrode coupled to
the input node, a second current electrode for coupling to the
input terminal of the linear regulator, and a control electrode. The
bias circuit has a first terminal for coupling to the output
terminal of the linear regulator and a second terminal coupled to
the control electrode of the transistor. The first capacitor is for
coupling between the input and reference terminals of the linear
regulator, and the second capacitor is for coupling between the
output and reference terminals of the linear regulator. The bias
circuit develops a voltage sufficient to drive the control terminal
of the transistor and to operate the linear regulator. The bias
circuit may be a battery, a bias device and a current source, a
floating power supply, a charge pump, or any combination thereof.
The transistor may be implemented as a BJT or FET or any other
suitable current controlled device.
Power
Supply: The examples chosen are taken from manufacturers' circuit
diagrams and are usually simplified to emphasise the fundamental nature
of the circuit. For each example the particular transistor properties
that are exploited to achieve the desired performance are made clear. As
a rough and ready classification the circuits are arranged in order of
frequency: this part is devoted to circuits used at zero frequency,
field frequency and audio frequencies. Series Regulator Circuit Portable
television receivers are designed to operate from batteries (usually
12V car batteries) and from the a.c. mains. The receiver usually has an
11V supply line, and circuitry is required to ensure that the supply
line is at this voltage whether the power source is a battery or the
mains. The supply line also needs to have good regulation, i.e. a low
output resistance, to ensure that the voltage remains constant in spite
of variations in the mean current taken by some of the stages in the
receiver. Fig. 1 shows a typical circuit of the power -supply
arrangements. The mains transformer and bridge rectifier are designed to
deliver about 16V. The battery can be assumed to give just over 12V.
Both feed the regulator circuit Trl, Tr2, Tr3, which gives an 11V output
and can be regarded as a three -stage direct -coupled amplifier. The
first stage Tr 1 is required to give an output current proportional to
the difference between two voltages, one being a constant voltage
derived from the voltage reference diode D I (which is biased via R3
from the stabilised supply). The second voltage is obtained from a
preset potential divider connected across the output of the unit, and is
therefore a sample of the output voltage. In effect therefore Tr 1
compares the output voltage of the unit with a fixed voltage and gives
an output current proportional to the difference between them. Clearly a
field-effect transistor could do this, but the low input resistance of a
bipolar transistor is no disadvantage and it can give a current output
many times that of a field-effect transistor and is generally preferred
therefore. The output current of the first stage is amplified by the two
subsequent stages and then becomes the output current of the unit.
Clearly therefore Tr2 and Tr3 should be current amplifiers and they
normally take the form of emitter followers or common emitter stages
(which have the same current gain). By adjusting the preset control we
can alter the fraction of the output voltage' applied to the first stage
and can thus set the output voltage of the unit at any desired value
within a certain range. By making assumptions about the current gain of
the transistors we can calculate the degree of regulation obtainable.
For example, suppose the gain of Tr2 and Tr3 in cascade is 1,000, and
that the current output demanded from the unit changes by 0.1A (for
example due to the disconnection of part of the load). The corresponding
change in Tr l's collector current is 0.1mA and, if the standing
collector current of Tr 1 is 1mA, then its mutual conductance is
approximately 4OmA/V and the base voltage must change by 2.5mV to bring
about the required change in collector current. If the preset potential
divider feeds one half of the output voltage to Tr l's base, then the
change in output voltage must be 5mV. Thus an 0.1A change in output
current brings about only 5mV change in output voltage: this represents
an output resistance of only 0.0552.
GENERAL BASIC TRANSISTOR LINE OUTPUT STAGE OPERATION:
The
basic essentials of a transistor line output stage are shown in Fig.
1(a). They comprise: a line output transformer which provides the d.c.
feed to the line output transistor and serves mainly to generate the
high -voltage pulse from which the e.h.t. is derived, and also in
practice other supplies for various sections of the receiver; the line
output transistor and its parallel efficiency diode which form a
bidirectional switch; a tuning capacitor which resonates with the line
output transformer primary winding and the scan coils to determine the
flyback time; and the scan coils, with a series capacitor which provides
a d.c. block and also serves to provide slight integration of the
deflection current to compensate for the scan distortion that would
otherwise be present due to the use of flat screen, wide deflection
angle c.r.t.s. This basic circuit is widely used in small -screen
portable receivers with little elaboration - some use a pnp output
transistor however, with its collector connected to chassis.
Circuit Variations:
Variations
to the basic circuit commonly found include: transposition of the scan
coils and the correction capacitor; connection of the line output
transformer primary winding and its e.h.t. overwinding
in series; connection of the deflection components to a tap on the
transformer to obtain correct matching of the components and conditions
in the stage; use of a boost diode which operates in identical manner to
the arrangement used in valve line output stages, thereby increasing
the effective supply to the stage; omission of the efficiency diode
where the stage is operated from an h.t. line, the collector -base
junction of the line output transistor then providing the efficiency
diode action without, in doing so, producing scan distortion; addition
of inductors to provide linearity and width adjustment; use of a pair of
series -connected line output transistors in some large -screen colour
chassis; and in colour sets the addition of line convergence circuitry
which is normally connected in series between the line scan coils and
chassis. These variations on the basic circuit do not alter the basic
mode of operation however.
Resonance
The
most important fact to appreciate about the circuit is that when the
transistor and diode are cut off during the flyback period - when the
beam is being rapidly returned from the right-hand side of the screen to
the left-hand side the tuning capacitor together with the scan coils
and the primary winding of the line output transformer form a parallel
resonant circuit: the equivalent circuit is shown in Fig. 1(b). The line
output transformer primary winding and the tuning capacitor as drawn in
Fig. 1(a) may look like a series tuned circuit, but from the signal
point of view the end of the transformer primary winding connected to
the power supply is earthy, giving the equivalent arrangement shown in
Fig. 1(b).
The Flyback Period:
Since the operation of the
circuit depends mainly upon what happens during the line flyback period,
the simplest point at which to break into the scanning cycle is at the
end of the forward scan, i.e. with the
beam deflected to the right-hand side of the screen, see Fig. 2. At
this point the line output transistor is suddenly switched off by the
squarewave drive applied to its base. Prior to this action a linearly
increasing current has been flowing in the line output transformer
primary winding and the scan coils, and as a result magnetic fields have
been built up around these components. When the transistor is switched
off these fields collapse, maintaining a flow of current which rapidly
decays to zero and returns the beam to the centre of the screen. This
flow of current charges the tuning capacitor, and the voltage at A rises
to a high positive value - of the order of 1- 2k V in large -screen
sets, 200V in the case of mains/battery portable sets. The e
nergy
in the circuit is now stored in the tuning capacitor which next
discharges, reversing the flow of current in the circuit with the result
that the beam is rapidly deflected to the left-hand side of the screen -
see Fig. 3. When the tuning capacitor has discharged, the voltage at A
has fallen to zero and the circuit energy is once more stored in the
form of magnetic fields around the inductive components. One half -cycle
of oscillation has occurred, and the flyback is complete.
Energy Recovery:
First
Part of Forward Scan The circuit then tries to continue the cycle of
oscillation, i.e. the magnetic fields again collapse, maintaining a
current flow which this time would charge the tuning capacitor
negatively (upper plate). When the voltage at A reaches about -0.6V
however the efficiency diode becomes forward biased and switches on.
This damps the circuit, preventing further oscillation, but the magnetic
fields continue to collapse and in doing so produce a linearly decaying
current flow which provides the first part of the forward s
can,
the beam returning towards the centre of the screen - see Fig. 4. The
diode shorts out the tuning capacitor but the scan correction capacitor
charges during this period, its right-hand plate becoming positive with
respect to its left-hand plate, i.e. point A. Completion of Forward Scan
When the current falls to zero, the diode will switch off. Shortly
before this state of affairs is reached however the transistor is
switched on. In practice this is usually about a third of the way
through the scan. The squarewave applied to its base drives it rapidly
to saturation, clamping the vol
tage
at point A at a small positive value - the collector emitter saturation
voltage of the transistor. Current now flows via the transistor and the
primary winding of the line output transformer, the scan correction
capacitor discharges, and the resultant flow of current in the line scan
coils drives the beam to the right-hand side of the screen see Fig. 5.
Efficiency:
The
transistor is then cut off again, to give the flyback, and the cycle of
events recurs. The efficiency of the circuit is high since there is
negligible resistance present. Energy is fed into the circuit in the
form of the magnetic fields that build up when the output transistor is
switched on. This action connects the line output transformer primary
winding across the supply, and as a result a linearly increasing current
flows through it. Since the width is
dependent on the supply voltage, this must be stabilised.
Harmonic Tuning:
There
is another oscillatory action in the circuit during the flyback period.
The considerable leakage inductance between the primary and the e.h.t.
windings of the line output transformer, and the appreciable self
-capacitance present, form a tuned circuit which is shocked into
oscillation by the flyback pulse. Unless this oscillation is controlled,
it will continue into and modulate the scan. The technique used to
overcome this effect is to tune the leakage inductance and the
associated capacitance to an odd harmonic of the line flyback
oscillation frequency. By doing this the oscillatory actions present at
the beginning of the scan cancel. Either third or fifth harmonic tuning
is used. Third harmonic tuning also has the effect of increasing the
amplitude of the e.h.t. pulse, and is generally used where a half -wave
e.h.t. rectifier is employed. Fifth harmonic tuning results in a
flat-topped e.h.t. pulse, giving improved e.h.t. regulation, and is
generally used where an e.h.t. tripler is employed to produce the e.h.t.
The tuning is mainly built into the line output transformer, though an
external variable inductance is commonly found in colour chassis so that
the tuning can be adjusted. With a following post I will go into the
subject of modern TV line timebases in greater detail with other models
and technology shown here at Obsolete Technology Tellye !
- The EHT Output is realized with a selenium rectifier.
The EHT selenium rectifier which is a Specially designed selenium rectifiers were once widely used as EHT
rectifiers in television sets and photocopiers. A layer of selenium
was applied to a sheet of soft iron foil, and thousands of tiny discs
(typically 2mm diameter) were punched out of this and assembled as
"stacks" inside ceramic tubes. Rectifiers capable of supplying tens of
thousands of volts could be made this way. Their internal resistance was
extremely high, but most EHT applications only required a few hundred
microamps at most, so this was not normally an issue. With the
development of inexpensive high voltage silicon rectifiers, this
technology has fallen into disuse.A selenium rectifier is a type
of metal rectifier, invented in 1933. They were used to replace vacuum
tube rectifiers in power supplies for electronic equipment, and in high
current battery charger applications.
The photoelectric
and rectifying properties of selenium were observed by C. E. Fitts
around 1886 but practical rectifier devices were not manufactured
routinely until the 1930s. Compared with the earlier copper oxide
rectifier, the selenium cell could withstand higher voltage but at a
lower current capacity per unit area.
TDA1170 vertical deflection FRAME DEFLECTION INTEGRATED CIRCUIT
GENERAL DESCRIPTION f The TDA1170 and TDA1270 are monolithic integrated
circuits designed for use in TV vertical deflection systems. They are manufactured using
the Fairchild Planar* process.
Both devices are supplied in the 12-pin plastic power package with the heat sink fins bent
for insertion into the printed circuit board.
The TDA1170 is designed primarily for large and small screen black and white TV
receivers and industrial TV monitors. The TDA1270 is designed primarily for driving
complementary vertical deflection output stages in color TV receivers and industrial
monitors.
APPLICATION INFORMATION (TDA1170)
The vertical oscillator is directly synchronized by the sync pulses (positive or negative); therefore its free
running frequency must be lower than the sync frequency. The use of current feedback causes the yoke
current to be independent of yoke resistance variations due to thermal effects, Therefore no thermistor is
required in series with the yoke. The flyback generator applies a voltage, about twice the supply voltage, to
the yoke. This produces a short flyback time together with a high useful power to dissipated power
ratio.
TBA920 line oscillator combination
DESCRIPTION
The line oscillator combination TBA920 is a monolithic
integrated circuit intended for the horizontal deflection of the black and white
and colour TV sets
picture tube.
FEATURES:
SYNC-PULSE SEPARATION
OPTIONAL NOISE INVERSION
GENERATION OF A LINE FREQUENCY VOL-
TAGE BY MEANS OF AN OSCILLATOR
PHASE COMPARISON BETWEEN SYNC-
PULSE AND THE OSCILLATOR WAVEFORM
PHASE COMPARISON BETWEEN THE OS-
CILLATOR WAVEFORM AND THE MIDDLE OF
THE LINE FLY-BACK PULSE
AUTOMATIC SWITCHING OF THE VARIABLE
TRANSCONDUCTANCE AND THE VARIABLE
TIME CONSTANT TO ACHIEVE NOISE SUP-
PRESSION AND, BY SWITCHING OFF, POS-
SIBILITY OF TAPE-VIDEO-REGISTERED RE-
PRODUCTION
SHAPING AND AMPLIFICATION OF THE OS-
CILLATOR WAVEFORM TO OBTAIN PULSES
FOR THE CONTROL OF DRIVING STAGES IN
HORIZONTAL, DEFLECTION CIRCUITS
USING EITHER TRANSISTORS OR THYRISTORS
THE
TBA920 SYNC/TIMEBASE IC It has been quite common for some time for sync
separation to be carried out in an i.c. but until 1971 this was as far
as i.c.s had gone in television receiver timebase circuitry. With the
recent introduction of the delta featured 110° colour series however
i.c.s have gone a step farther since this chassis uses a TBA920 as sync
separator and line generator. A block diagram of this PHILIPS /Mullard
i.c. is shown in Fig. 1.
The video signal at about 2-7V peak -peak is
fed to the sync separator section at pin 8, the composite sync waveform
appearing at pin 7.
The noise gate switches off the sync separator
when a positive -going input pulse is fed in at pin 9, an external noise
limiter circuit being required .
The line sync pulses are shaped by R1 /C1 /C2/R2 and fed in to the oscillator phase detector section at pin 6.
The
line oscillator waveform is fed internally to the oscillator phase
detector circuit which produces at pin 12 a d.c. potential which is used
to lock the line oscillator to the sync pulse frequency, the control
potential being fed in at pin 15. The oscillator itself is a CR type
whose waveform is produced by the charge and discharge of the external
capacitor (C7) connected to pin 14. The oscillator frequency is set
basically by C7 and R6 and can be varied by the control potential
appearing at pin 15 from pin 12 and the external line hold control.
Internally the line oscillator feeds a triangular waveform to the
oscillator and flyback phase detector sections and the pulse width
control section. The coincidence detector section is used to set the
time constant of the oscillator phase detector circuit. It is fed
internally with sync pulses from the sync separator section, and with
line flyback pulses via pin 5. When the flyback pulses are out of phase
with the sync pulses the impedance looking into pin 11 is high (21(Q).
When the pulses are coincident the impedance falls to about 150Q and the
oscillator phase detector circuit is then slow acting. The effect of
this is to give fast pull -in when the pulses are out of sync and good
noise immunity when they are in sync. The coincidence detector is
controlled by the voltage on pin 10. When the sync and flyback pulses
are in sync C3 is charged: when they are out of sync C3 discharges via
R3. VTR use has been taken into consideration here. With a video
recorder it is necessary to be able to follow the sync pulse phase
variations that occur as a result of wow and flutter in the tape
transport system, while noise is much less of a problem. For use with a
VTR therefore the network on pin 10 can simply be left out so that the
oscillator phase detector circuit is always fast acting. A second
control loop is used to adjust the timing of the pulse output obtained
from pin 2 to take into account the delay in the line output stage. The
fly back phase detector compares the frequency of the flyback pulses fed
in at pin 5 with the oscillator signal which has already been
synchronised to the sync pulse frequency.
Any phase difference
results in an output from pin 4 which is integrated and fed into the
pulse width control section at pin 3. The potential at pin 3 sets the
width of the output pulse obtained at pin 2: with a high positive
voltage (via R11 and R12) at pin 3 a 1:1 mark -space ratio out- put
pulse (32/us on, 32/us off) will be produced while a low potential at
pin 3 (negative output at pin 4) will give a 16us output pulse at the
same frequency. The action of this control loop continues until the fly-
back pulses are in phase with a fixed point on the oscillator waveform:
the flyback pulses are then in phase with the sync pulses and delays in
the line output stage are compensated. The output obtained at pin 2 is
of low impedance and is suitable for driving valves, transistors or
thyristors: R9 is necessary to provide current limiting.
TBA950-1/2 Television Signal Processing Circuit
General Description
The T B A 9 5 0 -1/ 2 is a monolithic integrated circuit for pulse separation and line synchronization in T V receivers
w i t h transistor o u t p u t stages.
The
TBA950 comprises the sync separator with noise suppression, the frame
pulse integrator, the phase comparator, a switching stage for automatic
changeover of
noise immunity, the line oscillator w i t h frequency range limiter, a phase control circuit and the o u t p u t stage.
It delivers prepared frame sync pulses for triggering the frame oscillator. The phase comparator may be switched
for video recording operation. Due t o the large scale of integration, few external components are needed.
