BLOG PAGES

▼

Wednesday, October 27, 2010

REPAIRING / SERVICING CRT TELEVISION ENTERING THE SERVICE MODE LIST BY CPU MODELS

  

  

 

 

 

 

 

 

  As time passes, some TV settings change. This is due to the aging of parts, deterioration of the emission properties of a CRT TUBE, external factors, such as exposure to electromagnetic fields. Therefore, it is often necessary ONLY AFTER REPAIRING to carry out certain settings of the TV, even if it is in good condition.
   
    These settings MAY  include: restoring white balance, setting the brightness adjustment range, centering vertically and horizontally, adjusting the geometric dimensions of the raster, adjusting the color purity, adjusting the focus of the image, setting the AGC trigger threshold, etc. Before making ANY OF the adjustments, de-GAUSS the CRT TUBE. If it is necessary to replace electronic components, pay HIGH attention WHERE YOU GET PARTS, where microchips, transistors, varistors, relays, thermal switches, quartz resonators, etc. are provided TODAYS NOT ANYMORE in a wide range.

Each of the settings has its own characteristics. Consider from start to finish the process of their implementation for CRT TVs. It should be noted that the described settings are applicable to MANY  models made on the MANY CPU CONTROLS  chassis with 14-, 20-, UP TO 37 inch CRT TUBE.

NOTE: If you are a beginner then please don’t try to disturb any setting, it is recommended for you.

WARNING FOR TV TECHNICIANS........ USE ONLY, THIS CAN MESS UP YOUR TV IF YOU'RE A NOVICE.

 Entering or making changes in service mode by untrained persons can cause significant and permanent damage to your television. If you are not qualified to service your television, please DO NOT ENTER these service menu codes.

Controllers for different TV

8821CPNG-5EE1, 8821CPNG-4CN8, 8821CPNG-4GD9, 8821CPNG-4U88, 8821CPNG-4RJ1, 8821CPNG-4JB2, 8821CPNG-5CV5 - See the chassis M28.

8821CPNG-4UD4 - Entry into service:
1.kanal 30
2.kanal 88
3.huchnist at least.
4.MUTE

8851CPNG - See the chassis M28.

8891CSCNG6V12 - Login service:
1. TV on the keyboard to set the volume to 0, hold the "VOL-" to press DISP (rectangle with a plus) on the remote control.
2. Sign in service - press the remote button "MENU", "CH" - and enter code 2483 or 6483 or 6568.
3. Hidden button FACTORY (under button PP)

8897CSBN - See the chassis ETE-2.

8897CSBNG-6PR4 PA-09 - See the chassis M28.

CXP85340, CXP85452-135S, CXP86441-509S, CXP86441-533S - See LG.

DW5255M, DW370M - See model DAEWOO 14A5 or KR21N7N.

GS8114-01B - Deactivation LOCK ON: Code for remote MAC-2000 - 1123.
1. Button "MENU".
2. "OFF" button with the key "Shift".

LA76931 - See LG.

LA76936, LA76938 - See the chassis SA-A.

LA76936DE - See SANYO Chassis AC6-A.

LA76936Y, LC863532C, LC863hhh, LA768hh (05, 10, 12, 18, 28.32) (A) - TVs controllers in many different chassis (eg, 3Y01) - variations of inputs to a service mode:
1. LC863320A, LC863324A, LC863328A, LC863332B - Click on the remote control button hidden FACTORY (or PROD), it can stay below button SLEEP. It is also possible to lock the pins 2 and 13 (2 and 14, 2 and 15, 2 and 16) on the remote control circuits.
2. "Volume" at least, simultaneously press and hold button while "VOL-" on TV and "RECALL" (DISPLAY) on the remote control. Buttons "Timer", "MUTE" - the choice menu.
3. Click on the remote control "SKIP", "VOL-", "AFT". (Or "-/--"). Button "PIC" - out.
4. On the remote press (MENU) (MENU) (V. WIEV) (MUTE) (SLEEP). Button "TIMER" - jump areas.
5. LC863320A - FUNAI MK11, LC863hhh LA768hh + (05, 10, 12, 18, 28.32) (A), Samsung SM14H4MJ - LA76936Y 7N-58T7 on the remote control to lock the pins 2 and 16 IC RT2461-103. First time - on the screen FACTORY. 2 times - on the screen: B / W ADJUST (rehulyuvannya. regimes kinescope). Three-times - ADJUST (geometry). 4 th time - SETUP (Setup option). 5th - Out with the service
Important! In ADJUST MENU SETUP SELECT put option "1", while the open sections 00 - 20.
6. LA76931, LA76936, LA76938 - similar processor SDA5522.

LC863332A - Entry into service from the service panel or remote FUNAI MK11 To enter service in the native remote control button prypayaty between 2 and 16 feet mieroshemy remote RT2461-103.
Push a button, and once - on the screen: FACTORY;
2 times - on the screen B / W ADJUST (reg. regimes kinescope) Push 3-times - ADJUST (geometry);
4 th time - SETUP (Setup options);
Five-times - out of service.
R-Button, R +; Vol-; Vol + help set the required values in the right places.

LC863332B 52Z6 3KD0, LC863532C-55P9, LC863532B-53l1, LC863532B-54R6, LC863532C-55K9- Entry into service menu: using the remote install "VOL-" to 0, then the main menu (or PICTURE MENU) code: 8 6 0 0, or 8 March 6, 3 or 6 4 8 3 (call it XXXX ) which is equivalent to pressing FACTORY.
Service mode contains three subsections: FACTORY, B / W BALANCE, ADJUST. Switching between them after pressing Factory, or by entering the code XXX X.
In the service menu we suggest ENG.OPTION = 1, SETUP SELECT = 1.
Exit from this mode, you have two options:
1. When you click the remote "MENU" code XXXX, appear in the mode "PRODUCT", then repeat the operation (after pressing "MENU", code XXXX), to return to normal.
2. Set option in the MENU 2003 "PROD MODE" = 0, and then click "MENU" to exit the service menu.

LC863332B, TDA9381PS/N2/1I1150, TDA9381PS/N2/1I1246.
Sign in service menu: Turn on TV and in operating on the remote control buttons to press consistently "POWER", "MUTE", "CALL", "TIMER", ". Appears on the screen FACTORY. Press the button" TIMER ", starting first menu bar control the white balance. Go to the next line of control buttons is "CH", modified digital byte value - the buttons "VOL +/-".

LC863528A-xxxx - Entry into service menu: click "REWIEW", then "VOL-" while "REWIEW".
To exit repeat.

LC863548B, Chassis PAXX0081.
Log in servic: TV on the front of the volume set to 0, hold the "VOL-" to press "DISP" (a rectangle with a plus) on the remote control.

LG8993-08B, LG8993-09B, LG8734-01E,, LG8738-05C, LG8993-13D, LG8993-37B, LG8818-19A, LG8991-04B - See LG.

M37102M8-C41SP, M37204MC-A49SP, M37201M6-C435SP, M37221M6-066SP, M37204MC-C40SP, VCT6743G B3 2008 - See the JVC.

M37160M8-058FP/M37160M8H-051FP or M37160M8-063FP M37160M8-064FP or.
Sign in service menu - the main menu code: 6 4 8 3, which is equivalent to pressing FACTORY.
Service mode contains three subsections: FACTORY, B / W BALANCE, ADJUST. Switching between them after pressing Factory, or by entering the code 6 4 8 3.

M37201E6-E8WW - See SANYO Chassis A8-B.

M37221M4-322SP - See M11D chassis.

MC144105 - See GRUNDIG chassis CUC5301.

NTDA9381/C340AG - Entry into service menu:
click on the remote control "MENU", 8, 5, 0, 0.

OM8363H/n3/4 - See SANYO.

QXXAVC305P, QXXAVC568 - See SANYO Chassis AC6-A.

SAA5290ZP/033, SAA5290, SAA5563PSM30053- See SANYO.

SAA5297PS/262 - See ORION 28BDF TV790, chassis 4400.

SAA5531 SAA5541:
Entrance to the service menu is possible in two ways:
1. On TV in working mode and 0.25 seconds to lock the connector X760.
2. On TV in operating on the service console hit "SERV", hold the press! " (On-board staff in the control circuit IC1 locking pins 3 and 9, 1 and 15, respectively). Moving in the service menu are made with remote keys "CH-", "CH". Tinctures parameters are the keys "VOL-", "VOL +". Using remote key "0 ... 9, you can select the menu item. Once the installation to exit the service mode and save the data click on the remote key TV (locking pins 1 and 9 IC1).
Withdrawal regime CASTLE: If forgotten confidential code, the menu function select mode "Castle" and keep the remote control button "X" 3 seconds.

SDA30C164 - See PANASONIC chassis EURO-3.

SDA3526 - See GRUNDIG chassis CUC1835.

SDA555XFL - See LG.

SDA5521 - See the chassis 12.5.

SDA5522 - Entry into service:
1. click on the remote control MENU.
2. three times on the remote press RECALL.
Surcharge pages - click MENU, exit - RECALL.
To remove these chassis lock - press and hold DISPLAY (RECALL) on the remote within 10 seconds.

ST6-ELAME2 - To enter the service menu press the button on the remote control point: "SKIP", "VOL-", "FINE TUNE".
To exit click the PIC.

ST92195C7B - Entry into service menu:
1. Log in to MENU
2. Activate FUTURE
3. Enter code 1923

ST92R195 - See SANYO chassis EB-6A.

STV92195 (TXT) or STV92185 (NO TXT), Chassis CTE-AA
Sign in service menu - install "program 75", press "OSD" button on the control and "MENU" on the front of the TV, hold about 4 seconds. Symbol "S" appears in the lower left corner.
Exit Service Mode: - turn off the TV.

TCL-A19V01-TO 87CP38N-4GD1,
TCL-M13V TMPA8809,
TCL-A25V02-T0 8857CRNG5FF4,
TCL-A30V02-TO 8821CRNG5JB2 - See the chassis M113, M17, M28.

TDA12020H/N1F00 - See SANYO Chassis FB1-B.

TDA9341 - On the remote quickly press the button "MENU" "6" "4" "8" "3". Go for digital service menu buttons 1 .. 4. Exodus - Power OFF.

TDA9345PS/N3/3/1913 - See BEKO Chassis E1.

TDA9350PS/N3/1I1515 - Entry into service menu - switch on the TV program in 1975 while Click "Display" button on the control and "Select" on the front of the TV.

TDA9351PS/N3/3 DTA1489 586E - Entry into service menu: click on the remote control: MUTE, CALL, - / -, CALL, MUTE. Out of service - click EXIT.

TDA9351 / TDA9381 (Option) - the entrance to the service mode is possible in two ways:
1. Enable TV is operating, to hit the remote service «SERV», hold the press "?" (On-board control in conventional circuits IC1 locking pins 3 and 9, 1 and 15, respectively).
2. Enable chassis to standby mode, the usual remote control key press sequence «STATUS», «MENU», «MUTE», «STBY».
A service menu. Moving in the service menu are made with remote keys «CH», «CH». Tinctures of - control keys «VOL +», «VOL-». Go with a submenu on one level - key «AV / TV». Information line "key" value displays the password entered in the user menu.
Settings menu "Geometry":
HS 36 * heave
VSH 33 * throw
VA 49 * Vertical size
VS 32 * Vertical linearity
SC 16 * S-correction
VA_Z 12 * Zoom
VA16 12 * 16h9
Settings menu in the "Preferences":
CL 1977 Size control voltage cathode
Y 10 Delay yaskravisnoyi component signal image
IFO 1932 IF PLL control
Vg2 * Adjust the accelerating voltage (placing the cursor on line Vg2, click «VOL» potentiometers and split-line transformer set Vg2 value "0", click «VOL»)
32 BLOR determination of "black" (not regulated)
BLOG 32 determination of "black" (not regulated)
R 32 * Set the control voltage value "red"
G 32 * Set the control voltage value of "green"
32 B * Installation size control voltage "blue"
AGC 19 gain IF "ARU"
VOL 30 Adjusting the volume in those. menu
Settings in the menu "Options":
DFL IE2 0 1 0 FFI
ACL EVG 0 0 PF 2
XDT FSL 0 0 2 RPO
BCF BKS 1 0 0 AV2
IVG LBL 0 0 1 DL
OSO 0 IF 38,9
AGN 0 AGCs 1,0
Settings menu in the "TUNER":
TSL 045 Setting the lower range for CF-1
Installing TSM 153 border ranges CF-1 and CF-3
TSH 428 Setting the border ranges CF-3 and UHF Broadcasting
TEH 863 Setting the upper range for UHF Broadcasting
TBL 01 Installation Package Selection range CF-1
TBM 02 Installation Package Selection range CF-3
TBH 2C Installation Package Selection range UHF Broadcasting
STEP 1 Set the minimum step channel configuration selector
DELAY 40 Set the time necessary to complete the channel selector transition, in milliseconds.
After installation is complete click on the button panel AV / TV twice (or locking pins 1 and 9 IC1), to exit the service mode and data storage.
To adapt chassis for use tube installation or removal process jumpers: A2, A3, A4-voltage unit B;
A6, A7 - reversing capacitors;
A8, A9 - voltage stress kinescope;
A10 - vertical size;
A12 - 9V supply voltage;
A13 - Beam current limiting.

TDA9351PS/N2/3I, TDQ935XPS/N2, TDQ936XPS/N2, TDQ938X/PS/N2 (CH05T0102)
TDA9351 48K PAL / NTSC / SECAM 1 PAGE TELETEXT
TDA9350 48K PAL / NTSC 1 PAGE TELETEXT
TDA9361 64K PAL / NTSC / SECAM 10 PAGE TELETEXT
TDA9360 64K PAL / NTSC 10 PAGE TELETEXT
TDA9380 32K PAL / NTSC
TDA9387 32K NTSC, Chassis EX-1A4 - set volume to 0. Then press and hold the MUTE button on the remote and press "MENU" on TV.
To exit the "S" mode off TV.

TDA9361PS/N3/5 CF6843 54,607,130 - Entry into service: click on the remote control button "MENU" and enter code 6483.

TDA9363 TDA9381 TDA9384.
Option 1. Controller TDA9384/TDA9363: Press MUTE, CALL, 9, a lighted 9 - - "then press" 8 "," 0 "should appear inscription" M ". Press "MENU" to go into service menu. Buttons CH + / CH-to select the option, V + / V-to change.
Option 2. controller TDA9381: press and hold button 4 seconds "QV", then click on the remote control "MENU1", the screen is lighted inscription "TEST". If you press the buttons with numbers "Mkey" appear on the screen corresponding submenu or inscription PASSWORD then you must enter the password .. 828 buttons CH + / CH-to select the option, V + / V-to change. Turn the TV remote control translates into normal mode.

TDA9365PS/N3/5, TDA9352PS/N3/1/1683, TDA9565, TDA9352PXN.
Entry: "St-by"> "MENU" on TV + "0" on the remote control. Exit> "TV".

TDA9370PS/N3/A TSG March 0430Eeprom: 24C08.
Log in Service "uncivilized": programmer register cell in 1D1-FF, when turning the machine is in service mode.
1-8 buttons selected menu page. Exit - click "I". Memorizing is done automatically. Without the original remote you can use the MAC code 1264.

TDA9380PS/N1/1K0231 - Entry into service:
Simultaneously press the teletext button on the remote control "Clock" and "VOL-" on local keyboard. After 2-3 seconds the TV will enter Service Mode.

TDA9381/C346BG - Entry into service menu: the main menu code: 6 4 8 3.

TDA9381-7NA - Click on the remote control "MENU" "8", "5", "0", "0". Select options - buttons 0 - 9. You must enter the desired number of groups of options, with the first available option groups 3, 4 and 5. When you try to call the other options on the screen there is a castle. You must enter the code "200 528" then there is the invitation PRESS MENU NUMBER. To remove the code "lock" to keep more than 5 seconds LOCK key on the remote and the menu, which appears to disable the code. All programs 1 ... 0 "to remove the lock (required at all!)
Instead, staff can use the remote MAK-2000, code 1172. ERASE button displays the TV once in service menu, and then also use buttons and "R +, R-", "Vol +", "Vol-".
Out of service - ERASE button or STBY or TXT - click 3 times.

TDA9381PS/N2/1I0721 TDA9381PS/N2/1I0836 TDA9381PS/N2/1I1156 TDA9381PS/N2/1I1520 TDA9381PS/N3/1/1729
To enter the service you need in safe mode press the menu button on the front of the TV and the "0" on the remote control.
To remember the settings you have to click "TV" and hold off from network TV
Removing lock: enter the Options menu, select Castle, dial "2", "2", "white button".

TDA9381PS/N2/3I0792 OICTMPH010A.
In RC-5 remote lock pins 1-11 SAA3010. Switching service pages - "Q. VIEW" console TV. OK - remember.

TDA9381PS/N2/3I DTA1481 "Y" D621- Entry into service:
Closed short pins 18-24 Products Remote JKT T3833-02G.

TDA9381PS/N3/3 P26NG - On the remote press "2". six times after pressing "P-", click "V" hold 10 seconds, the service menu appears. Exodus - "DISPLAY".

TDA9384PS/N3/3, TDA9384PS/N2/3I - See the chassis 3P51.

TMPA8851CPNG-6EG1, Chassis TD173.
Log in servic: TV on the front of the volume set to 0, hold the "VOL-" to press "DISPLAY" (a rectangle with a plus) on the remote control.

TMPA8821CPNG-4UD4 - Entry into service: 30 channel, 88 channel, Volume - 0, MUTE.

TMPA8821CPNG-5EE1 - See the chassis M28.

TMP47C1637 - See PHILIPS chassis GR2.2AA.

TVP02066 D05 \ 2004 - See AIWA 1402.

VCT3831A entry into service: press "MENU", then press RECALL five times. 1 more buttons ... 9 the various service menus.
Exit from service button 0 or RECALL.

VCT6743G B3 2008 - See the JVC.

Philips TV service mode
philips colour tv repairing

PHILIPS-1
# Press {0} {6} {2} {5} {9} {7} {INFO+} on the remote.
or
# Press {0} {6} {2} {5} {9} {7} {STATUS} on the remote.
or
# Press {0} {6} {2} {5} {9} {7} {MENU} on the remote.
# Turn the TV off to exit the Service Menu.
PHILIPS-2
* Press {0} {6} {2} {5} {9} {6} {INFO+} on the remote.
or
* Press {0} {6} {2} {5} {9} {6} {STATUS} on the remote.
or
* Press {0} {6} {2} {5} {9} {6} {MENU} on the remote.
* Turn the TV off to exit the Service Menu.
PHILIPS-3
* Press {0} {6} {1} {5} {9} {6} {MENU} on the remote.
or
* Press {0} {6} {1} {5} {9} {7} {MENU} on the remote.
* Turn the TV Off to exit the Service Menu.
PHILIPS-4
* Press {1} {6} {2} {5} {9} {6} {MENU} on the remote.
or
* Press {1} {6} {2} {5} {9} {6} {STATUS} on the remote.
* Turn the TV off to exit the Service Menu.
PHILIPS-5
* With the TV off:
* Press {0} {6} {2} {5} {9} {6} {STATUS} on the remote.
* Turn the TV off to exit the Service Menu.
Models 15MF605T/17, 20MF605T/17, 15MF500T/37:
To Factory Mode:
Step 1 : Select the source "PC" and then turn off LCD-TV.
Step 2 : [Push "power " button and then push the "VOL- " and "VOL+" buttons at the same time immediately and hold it] about five seconds then release all buttons.
Press "menu"button and bring up factory mode indication
SAMSUNG COLOUR TV SERVICE MODE
CHASSIS = KS-1A
SERVICE MODE - STANDBY -DISPLAY - MENU- MUTE- POWER ON
CHASSIS = SCT12B
MODEL = CK6202, CK7202, CK5944, CKC844
SERVICE MODE = STAND BY- P.STD- HELP - SLEEP- POWER ON
Use ch+/ ch_ and vol+ /vol - keys
MODEL - CK 6271 WP
SERVICE MODE = STAND BY- P.STD- HELP - SLEEP- POWER ON
 Use ch+/ ch_ and vol+ /vol - keys
CHASSIS = KS-2A
MODEL = METALLICA CS-21C3 , PLANO CS-21A8
 SERVICE MODE = PICTURE OFF - DISPLAY- MENU-MUTE - PICTURE ON
CHASSIS = S15A
MODEL = CB-14F1, CB-20P30, CB-20H1, CB-20S20, CB -21H1, CB-21P30, CB-21S20, CB-3373, CB-5020, CB-5073, CB-5079, CB-5320, CB-5373, CB-5379, CK331FVR5X/NTW, CK331FVR5X/BWT, CK331FVR5X/VWT, CK501FVR5S/ NTW,
SERVICE = STANDBY- DISPLAY- P.STD- MUTE- POWER ON
Use ch+/ ch_ and vol+ /vol - keys


Samsung TV service mode
SAMSUNG
Put the TV into standby
Press the {INFO} {MENU} {MUTE} {POWER} buttons on the remote within 3 seconds (in that order; one-by-one)
Use the {POWER} button to exit the Service Menu. OR Turn TV off
Press: MUTE 1 8 2 POWER
TV will power up in service mode and GAMMA GAIN1 will be displayed on the screen
Use VOL+ and VOL - to select an item
Use MUTE and the MENU to adjust
Use ADD to save the settings
CHASSIS: SCT51A
Turn TV off
Press SLEEP P.STD MUTE
CHASSIS: SCT11A, SCT11B, SCV11A, SCV11B
Press P.STD MENU SLEEP POWER ON
Perform adjustments with VOL + and VOL -
Select between adjustments with CH + and CH -
Samsung TV service mode
Samsung CN5039 TV mode service
Television off possition, press MUTE button, input these number , 1, 8, 2, POWER, enter the menu service principal, to select a sub menu use Channel + / - and volume + / - to enter service mode Samsung CN5039 .
To select items press channel up or down to adjust press volume up or down
To return to the main menu, press MENU, press power to exit and save settings of Samsung tv.
Samsung DY-450 TV mode service
Open the remote control of Samsung Television (the board must have an identity.: D-19H), find the key hidden more below the key TV / VIDEO, it would go to service mode.
Samsung Plano TV mode service
On TV set press power on R/C go to stand by,press display-menu-mute-power on. Up & down to select Vol+ & Vol- to change data value.
Samsung TV service mode 2
SAMSUNG PLH403 TV SERVICE MENU
Switch of the TV, press the remote control the following sequence: MUTE button and input the number 1, 8, 2, POWER button,
with volume up or down moves from the menu by pressing MENU button and MUTE switches the data. Press MEMORY button to store data. press DELETE button to exit from the Samsung PLH403 system.
SAMSUNG EUROPE TV SERVICE MENU
Press the following sequence on the remote control:
DISPLAY, PSTD, MUTE
or SLEEP, MENU, HELP
or DISPLAY, PSTD, SLEEP
SAMSUNG CS-721 CS-723 TV SERVICE MENU
CS-721
CS-723
SCT52A CTV Service Menu
PICTURE OFF --> SLEEP --> P.STD -->
MUTE --> PICTURE ON
Samsung TV service mode 3
SAMSUNG TV SERVICE MENU
Press power button on remote control going to STAND-BY mode -->press P.STD --> MENU -->
SLEEP --> POWER ON quckly.
Samsung CN5039 TV Manuals Service Menu
Television off possition, press MUTE button, input these number , 1, 8, 2, POWER, enter the menu service principal, to select a sub menu use Channel + / - and volume + / - to enter service mode Samsung CN5039 .
To select items press channel up or down to adjust press volume up or down
To return to the main menu, press MENU, press power to exit and save settings of Samsung tv.
Samsung CN565B, CT5038, CT5066.
Samsung TV service mode 4
Samsung CX7039 Manuals Service Menu
Within the remote control at the plate, on the side of the tracks, there is a marked diode, a 1N4148 or similar place. Turn the TV and press MENU to
enter the service mode.
Samsung TV manuals schematic
Samsung CT5066 Manuals Service Menu
With the TV off, press the remote control to MUTE, 1, 8, 2, POWER, enter the menu service principal, to select a sub menu use CANAL + / - and VOL + / - to
enter. To select items CANAL + / - to adjust VOL + / -.
To return to the main menu, press MENU, press to exit and save
POWER.


SONY TV service mode


SONY -1

1. Unplug the TV power cord from the electrical outlet.

2. Allow the TV to remain without power for one minute.

3. Plug the power cord back in to the electrical outlet.

IMPORTANT: The TV should turn on automatically. If it does not, go ahead and turn it on.

4. While the TV is turned on, unplug the power cord from the electrical outlet as before.

5. Allow the TV to remain without power for another minute.

6. Perform a factory reset.

A. After a picture or display information appears, wait two seconds and then press and hold the up arrowbutton on the remote control.

IMPORTANT: Make sure the remote control is pointed towards the front and center of the TV.

B. While holding the up arrow button, press and release the Power on button on the side of the TV. Reset will appear momentarily on the lower left hand corner of the TV.

NOTE: If the reset procedure does not start immediately after the picture or display information appears, the reset will not work properly. In this case, start this procedure again.

C. Release the up arrow button on the remote control and wait for the TV to reset.

NOTES:

o If the Reset message does not appear and the TV turns off and on, begin again from step 5.

o If the standby light begins blinking eight times, return to step 1.

After the Reset message appears, allow the TV to reset. Do not press any buttons on the remote control or on the TV and do not make any other adjustments for 1 minute.

Unplug the power cord from the electrical outlet.

Allow the TV to remain without power for 10 seconds.

Plug the power cord back in to the electrical outlet.

Turn on the TV.


With the set OFF, quickly press DISPLAY 5 VOL+ PWR. The word SERVICE will be displayed
Press 1 or 4 to select an adjustment that you want to change
Press 3 or 6 to adjust
Press MUTE then ENTER to save each adjustment

Sony tvs made in 1990's press and hold a recessed button
on the rear of the set as you turn the TV on instead of pressing
DISPLAY, 5, VOL+, PWR (hole for button is under VIDEO jacks)
SONY 2

PROJECTORS :


* Service Menu :
* Using the remote control
* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.
* Then {UP ARROW} when it asks: "Do you want to enter the Service Mode?".

* Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.
* Then {UP ARROW} when it asks: "Do you want to enter the Factory Mode?".

* Any additional menus usually pop up under the main INFORMATION menu.

SONY 3

* Access "Menu" and make sure "Status" is On.
* Exit the "Menu".

* Service Menu :
* Using the remote control
* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.
* Select "Yes" when it asks: "Do you want to enter the Service Mode?".

* Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.
* Select "Yes" when it asks: "Do you want to enter the Factory Mode?".
SONY 4
# Using the remote control:
# Turn the TV off.
# Press {DISPLAY} {5} {VOL+} {POWER ON} buttons.
or
Press {DISPLAY} {5} {POWER ON} buttons.
# The Service Menu will be displayed.
# Use numbers {1} and {4} to select the item to adjust.
# Use numbers {3} and {6} to adjust the value of the data.
# Press {MUTE} then {ENTER} to save new settings.
# The words "WRITE" in red will show up in the upper right corner if saved.
# Turn the TV off to exit the service menu.
Sony KV-E2531 etc  service mode
KV-E2931,KV-E3431,AE-2
CTV Enter Service mode
Turn on the main power switch of the set while pressing any two buttons on the front panel. 'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC. In menu select 'DEMO' and press 'OK'. Select DEVICE coresponding to the adjustment you need. Store: OK. Exit: turn off.


Panasonic TV service mode

1 For chassis AMEDP, APEDP, AREDP ...
Press ACTION (TV turned on)
Select SET-UP icon, set antenna to CABLE
Select TIMER icon, set sleep timer to 30
Press ACTION twice to exit menus and tune to channel 124
Adjust volume to 0
Press VOL - on TV control panel and red 'CHK' will appear in the upper left corner
To toggle between Serviceman and Aging Modes press ACTION and VOL + simultaneously on the control panel
The set is now in Serviceman Mode, press POWER on remote to select one of the five Serviceman Adjustment Modes:
B = VCJ Sub Adjustments
C = VCJ Cut-off Adjustments
S = Options (PIP and Clock Adjsutments)
M = MTS Adjsutments
'CHK' = Normal operation of CHANNEL and VOLUME controls
Press CHAN UP / DOWN on remote to select an item
Press VOL LEFT / RIGHT to adjust


Short test point FA1 to cold ground FA2 (A-board: TP pin 8 to pin 3)
Receiver is in Aging Mode with yellow 'CHK' in the upper-left corner
Press ACTION and VOL+ simultaneously on the control panel and 'CHK' should be in red
The set is now in Serviceman Mode, press POWER on remote to select one of the five Serviceman Adjustment Modes:
B = VCJ Sub Adjustments
C = CRT Adjustments
D = Pincushion Adjustments
S = Options Adjustments (PIP and clock)
Press CHAN UP / DOWN on remote to select an item

Press VOL LEFT / RIGHT to adjust


TX-W28R3 (and similar models)

Set BASS to maximum position, set TREBLE to minimum position
Press REVEAL on the remote control and at the same time press VOLUME on the TV.
This will place the TV into the Service mode
Press the RED / GREEN buttons to select an item
Press the YELLOW / BLUE buttons to adjust
Press STORE on the preset panel after each adjustment has been made to store the required values
To exit the Service Mode, press NORMALIZATION

RCA/GE CTC175 thru CTC187

Turn TV on - Press and hold MENU - Press POWER - Press VOL+
P00 and V00 will be displayed (left and right sides of screen)
Release MENU - Press VOL+ to set V00 to no. V76
Press CH+ to select an adjustment that you want to change ( ???P00??? )
Press VOL+ and VOL- to adjust ( ???V00??? )
P01 Horiz Freq P07 Red Bias
P02 Horiz Phase P08 Grn Bias
P03 EWDC P09 Blu Bias
P04 EW amp P10 Red Drive
P05 Vert Cent P11 Grn Drive
P06 Vert Size P12 Blue Drive

Panasonic TV's after 1996 can be set to "Serviceman Mode" with the
following remote control sequence:

-select the SET-UP icon and select CABLE mode.
-select the TIMER icon and set the SLEEP timer for 30 minutes.
-press the ACTION button twice to get out of the menus.
-change to channel 124.
-adjust the volume to minimum (0).
-Hit the VOL down button on the TV itself (not on
the remote) and a red "CHK" should appear in the upper corner.
-press the ACTION and VOLUME DOWN buttons (again, on the
TV, not the remote) you will toggle between AGING and SERVICEMAN modes.

Select Serviceman mode. The POWER button on the remote control will
select one of the five Serviceman Adjustment modes.

The modes are:

B - Serviceman VCJ SUB Adjustments. These include sub-tint,
sub-color, sub-brightness, sub-contrast, colorkiller/ABL/gamma,
audio and video adjustment, and vertical size.

C - Serviceman VCJ Cut-off adjustments. These include Red, Green
and Blue cut-off, red and blue drive, automatic fine tuning
(AFT), RF AGC (RF gain control), horizontal center, beam limit,
etc.

S - Serviceman Options Adjustments. These involce the PIP and
clock.

M - Serviceman MTS (Stereo/SAP) adjustments.

CHK - the mode you first entered. Normal picture and sound, lets
you check things over and still have a hotkey into the
service menu.

There is one more adjustment that isn't in the five modes, it's
global. When in either the yellow or red CHK mode, you can press
RECALL on the remote control to enter the purity field check mode.
This lets you select a pure white, red, green, or blue screen. A
good thing to walk away from if you just want to temporarily freak
out the floor manager, but it will be fixed as soon as the TV is
turned off. Oh well.

To get out of Serviceman mode, press ACTION and POWER on the
receiver simultaneously for at least 2 seconds. The TV will momentarily
shut off and then comes back on.


----------------------------------------------------------------------------------
PE77U / PX75U / PX77U / PZ700U / PZ750U
PD60U / PX6U / PX60U / PX600U
PD50U / PX50U / PX500U :


* Hold down the {VOL -} button ON THE PLASMA TV.
* Press the {RECALL} button 3 times on the remote.
* The Service Menu will be displayed.
* Use {1} {2} on remote to navigate main menu items.
* Use {3} {4} on remote to navigate sub-menu items.
* Use {VOL+} {VOL -} on remote to change item value.
* Write down all values before changing
Once a value is changed, THE CHANGE IS MADE.
* Power off to exit service mode and save.



PA25UP / PD25UP / PX25UP :


* Using the remote control:
* Press the {MENU} button.
* Set "Antenna A" to "Cable".
* Select "Timer" menu and set sleep timer to 30 min.
* Press {OK} twice to exit menus.
* Tune to channel 124.
* Press and hold {VOL -} button ON THE PLASMA TV.

"CHK" appears in on top-left corner followed by 5 letter/numbers
(which are the cumulative hours in hex numbers)

* While the "CHK" is displayed, press the {OK} and {VOL+} buttons
ON THE TV simultaneously to toggle between Modes:


* Press the {POWER} button on the remote to select one of the six
Serviceman Adjustments Modes.

A. MTS ADJUSTMENT
B. CLOCK ADJUSTMENT
C. VIDEO ADJUSTMENT
D. HDEF ADJUSTMENT
E. VDEF ADJUSTMENT
F. DAF ADJUSTMENT
G. OTHER ADJUSTMENT

* Press {CH+} {CH -} on the remote to select the settings
on each of Service Adjustment Modes.

Write down the original values before modifying anything.
It's easy to erroneously adjust the wrong item.

* Press {VOL+} {VOL -} on the remote to change values.
* Press the {POWER} button on the TV to exit the service menu.


PA20UP / PX20UP :


* Using the remote control:
* Press the {MENU} button.
* Press "Setup" menu.
* On "Mode" menu, select "Cable"
* Select "Timer" menu and set sleep timer to 30 min.
* Press {ACTION} twice to exit menus.
* Tune to channel 124.
* Press and hold {VOL -} button ON THE PLASMA TV.

"CHK" appears in on top-left corner followed by 5 letter/numbers
(which are the cumulative hours in hex numbers)

* While the "CHK" is displayed, press the {ACTION} and {VOL+} buttons
ON THE TV simultaneously to toggle between Modes:


* Press the {POWER} button on the remote to select one of the six
Serviceman Adjustments Modes.

A. MTS ADJUSTMENT
B. CLOCK ADJUSTMENT
C. VIDEO ADJUSTMENT
D. HDEF ADJUSTMENT
E. VDEF ADJUSTMENT
F. DAF ADJUSTMENT
G. OTHER ADJUSTMENT

* Press {CH+} {CH -} on the remote to select the settings
on each of Service Adjustment Modes.

Write down the original values before modifying anything.
It's easy to erroneously adjust the wrong item.

* Press {VOL+} {VOL -} on the remote to change values.
* Press the {POWER} button on the TV to exit the service menu.



* Hold down the {VOL -} button ON THE TV.
* Press the {RECALL} button 3 times on the remote.
* The Service Menu will be displayed.
* Use {1} {2} on remote to navigate main menu items.
* Use {3} {4} on remote to navigate sub-menu items.
* Use {VOL+} {VOL -} on remote to change item value.
* Write down all values before changing
Once a value is changed, THE CHANGE IS MADE.
* Power off to exit service mode and save.


Model PT45LC12:

1. Press and hold Vol Dn on center panel and press recall button on remote until Work Mode is displayed on screen.
2. Press and hold Vol Dn on TV and Swap button button on remote until Factory Adjust is displayed on the screen
3. Use Channel Dn button to select Digital and press the Action button.


PROJECTORS :

* Press the {MENU} button.
* Go to "Options" menu.
* Highlight "OSD".
* Then press and hold the {ENTER} button,
until the Service Menu is displayed.
* Press the {MENU} button to exit.


PROJECTORS:

# Turn the Projector on.
# Press the {POWER} button.
# A "Power Off" confirmation will come up on screen.
# Then press {LEFT} {UP} {DOWN} {UP} {DOWN}
& {ENTER} buttons.

# The Service Menu will be displayed.
# To exit, turn the Projector Off.


Panasonic TV service mode


Panasonic TX-33AK10.mode service
Bass to max.
Treble to min.
Hold down "index"
Press "-" (minus) on the front of the set

Panasonic EURO-2 mode service
CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and
High-tone-regel to minimum. Press 'F' button on TV.
Then press VOL- on TV and REVEAL on remote control in
some time. Select press red and green buttons.
Adjust press yellow and blue buttons. Store press
'STR'. Exit press 'N' on remote control.



Panasonic TX-25W3E mode service
Increase the bass to maximum, decrease treble to minimum, press RESET on the remote control and while in the TV-volume. Using the Teletext press RED and GREEN selects the
item with Blue and Yellow line values. To store the new press STORE. To exit NORM (normalization).

Panasonic Plasma 3UY mode service
Press the volume down & hold down the button on the plasma TV display.
Press 3 times the STATUS button on the remote control.
Status button is the one below Power button
The Service Menu mode CAT will comes up.
CAT is Computer Aided Test Menu
To select a mode parameter use the cursors keys on the remote control.
And press the Action key {} to access the menu.
To exit mode Press the R button.

 Toshiba TV service mode



With the set ON, press MUTE once remote, then press MUTE again and hold in down while pressing MENU on the TV
The letter S will appear on the screen to show that the set is in the Service mode
To select the adjustment that you want to change press CH+ or CH -
Press VOL+ or VOL- to adjust

or
With the set ON, Push the MUTE button on the remote 3 times and on the third time hold it down then press MENU on the set.


Enter DATA SET mode by setting VOLUME to minimum.
Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 1 second.
ADDRESS and DATA should appear
ADDRESS is now selected and should "blink". Using the SET + or - keys on the remote,
step through the ADDRESS until required ADDRESS to be changed is reached.
Press ENTER to select DATA. When DATA is selected, it will "blink".
Again, step through the DATA using SET + or - until required DATA value has been selected.
Pressing ENTER will take you back to ADDRESS for further selection if necessary.
Repeat steps 3 to 6 until all data has been checked.
When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.

Toshiba TV service mode - Reset
Service mode and reset TV Toshiba
Toshiba Chassi:
U9 / Mode of Service

The fittings should only be made with remote controls that contain the functions MUTE and CALL

Press again MUTE and maintaining her compressed, press the key menu in the panel of the television.
Deverá to appear the letter S in the song superior right of the screen.
Os addresses and adjustment data appear in the left superior song of the screen
Os addresses are selected with keys CH + and CH–of the remote control.
Ajustes the data with as keys VOL + and VOL–
to leave in the Mode of services, turn off and tie the television again
Mode of Service (S)
Press the key mute in the remote control and observe the registration " sound turned off in the screen " of the tv.
Press the key again MUTE and maintaining her pressed it works the key MENU in the panel of the television.
The letter " S " appears in the song superior right of the screen.
The addresses and data appear in the left superior song of the screen. The addresses are worked with the
keys CH + / - of the remote control and the data with it types them VOL + / -

Mode of Development (D)
With the television in the Mode S presses the key CALL in the remote control, and maintaining her pressed it works the
key MENU in the panel of the television
Observation: to leave in the Mode of Service or in the Mode of Development it turns off and tie him/it again
television.

Reset:
The television should be in Mode of Service
Press the key CALL of the remote control
Press the key CALL in the remote control and without you liberate her it presses the key CH + in the panel of the television.
Toshiba TV  service mode 2
Toshiba TV mode service
TV No menu on TV panel
Press AV&F Simultaneously, enter this code 1048 on remote control of Toshiba Television,

TOSHIBA CHASSI U–11 AND U–14

The fittings should only be made with remote controls that contain all as options ("complete")

Press in the remote control the key MUTE, until the message TURNED OFF SOUND to appear
Press again MUTE and press MENU at the same time in the painel of the television .Nos Models in that the key MENU not to exist, press VOL at the same time + and VOL -) Models with suffix FAV)
Aguarde until appearing the indication S in the superior song of the screen
The addresses and data appear in the left superior song.
os addresses are selected by the keys CH + and CH–in the remote control
to adjust the data, use the keys VOL + and VOL–
to leave in the service Mode, turn off the television and call–again
Toshiba TV service mode 3
TOSHIBA 2150 S5E TV SERVICE MENU

Toshiba 2150 S5E
CTV Service Menu
Press 'MUTE' button. Press and hold 'MUTE' button and press 'MENU' on local keyboard. Select: PR nr.. Adjust: VOL+/-. Store: auto.
Exit: 'STANDBY'. Test picture: 'AV'.

TV No menu on TV panel
Press AV&F Simultaneously, enter this code 1048 on remote control of Toshiba Television,


START -------- ZENITH

START U3P/U2P chassis 21380.
1. processor TDA9381 - see processor TDA9381-7NA.
2. processor TDA9341 - see processor TDA9341.

START 28TL2, 1415T 2021 2123 2166 - see chassis TV2KM, TV3K

START 1416A, 2136QF (CPU NTDA9381C312A, chassis PCB TH29PNL-A.PCB) - on the remote press "MENU" 8500. Select sub groups - buttons 0-9.


Approximate value:
MENU1 band = 2 av-cfg = 0 ntsc-mix = saf video-out = cvbs pin = 5 ntsc-pro = 0 start-time = 6
MENU2 vision-if = 38.9 dk = on bg = on i = 0n m = off sif-prefer = bg auto-sound = on
MENU3 start-on = on eng = on arab = off pers = off turk = off fra = off rus = on bulg = off portug = off
MENU4 s-con = 63 s-col = 50 s-shp = 48 s-tint = 12 y-pal = 7 y-ntsc = 7 y-sec = 7 y-av = 7 u-vol = on u-vol = 32 tda9874-gain = 15 6 cathode = sc-bri = 32
MENU5 osd-vp = 60 osd-hp = 21 wide = 20 zoo m = 55 MENU-title = 0 logo-addr = 0 logo-val = 0 logo = write
MENU6 search = speed = 1
MENU7 agc-top = 20 agc-speed = 1 1 = sp-30 sp-25 sp-50 = 50 = 70
MENU8 freq = 50hz vsl-ope = 40 vshift = 30 va mp = 45 vscor = 20 hshift = 31 rgb-hshift = 6 rgb-hpos = 0
MENU9 bt = 48 ct = 48 sc = off rb = 32 gb = 32 rd = 32 gd = 28 bd = 32 sb = 42
MENU0 avl = on fsl = on f mws = off ffi = off oso = on fco = off woof = off dual-out = 0 vol-pin = pushpull

START 2116 (chassis JL-500) - on the remote press "MENU" 8633. Select sub groups - buttons 0-9.

START 20CX7 - see chassis TV-2K (TV2K).

STEREOPLUS chassis (SABA, ITT, SELECO, TELEFUNKEN):
Option 1: Quickly press "MUTE", "OK", "TV". Record - click "OK". Instead of "TV" possible "M". Exit: TV.
Option 2: Quickly press "OK / M", "TV", "MUTE".
Option 3: click on the remote [i] -> [M (red)] -> [P (prog)]. The [M] - memory option. Exit service mode - [TV]. IMPORTANT: If the output manager 27 processor (connected to "ground" through resistor 10kOm) put through this resistor to +5 V, then the full menu is available (standard range of color and sound).

SUPER AV-888 chassis G700 processor S3F880AXZZ-AQBA.
To enter service mode press consistently POWER - MUTE - CALL - TIMER - "snake arrow button.

SUPRAS14N7A, processor TDA9381PS/N3/3/2009 CK1146 - see chassis 3P51

SUPRA S21SL10 processor TDA9384PS/N3/3 - see chassis 3P52E.

SUPRACTV-21NX processor LC863328C-55W0, LA76810A - see chassis 3Y11.

SUPRAS14N8 processor M37160MAH-09CFP - see chassis 4B-1

SUPRA Chassis H-704V-05 ST 21B55F, processor SDA555XFL-A14 NN5198K, sound MSP3460G. Click on the remote control "DISPLAY". "MUTE". "SLEEP". "FUZZY". "DISPLAY".

SUPRA S-29F7A TDA9384PS/N3/3 - see chassis 3P52E.

SUPRA STV2091W. With the universal remote RZ-1966 (AV-8), code 159, press: "MUTE" MENU ".
Subparagraphs servisnohomenyu:
F - as usual - the total discharges stray all settings.
G - the entrance to the service.
F - out of service, data is stored.
E - in the service mode activated "Heat Run". The same button - exit from this mode.

SUPRA ST21J40 / G
Expand the original console. Lowest right button (it does not appear on the cover of the remote) - a service entrance. More like on most TV sets - "volume" and "channels" - the choice of adjustment options, remember avtomattychno happens, you should not confirm. Exodus - POWER OFF

TAU CT34WX50
Click the "VOL-" on TV and quickly press the "INFO" on remote 3 times.

TAURAS (TAURAS) ST1411T processor ST92T195
Sign in service - close to the remote 12 and 26 pins on the original remote (if parse) yellow button located under the button "Service".

TAURASProcessor ST92T195 - see chassis TV2K.

TCL CPU M37221M4-322SP - see chassis M11.

TCL Chassis M13, processor TCL-A18V01-TO 87CP38N-4CP1 (87CP38N-4GD1) M13VR2V1/TCL-M13,
Chassis M28 TCL-A19V01-TO 8821CPNG4GD9 TCL-A19V03-TO 8821CPNG4U88 TCL-A19V07-PO 8821CPNG5SV5 TCL-A30V02-TO 8821CRNG4JB2 - see chassis M13, M28.

TCL Chassis M35, M36 processor VCT3831A - see appropriate chassis

TCL processor TDA12062H/N1F00 - see chassis M66.

TCL processor 1207H/N1D00- see chassis M68.

TCL Processor TCL-A25V02-T0 8857CRNG5DU1 - see chassis M113.

TCL L42M61F processor MST6M69L-LF.
1. Set volume to 0.
2. The cursor will move to position "contrast"
3. Schvydko digital dial buttons "9, 7, 3, 5.

TCL Processor 8821CRNG5JB2 TCL-A30V02-TO
In the operating mode of the TV volume to decrease to 0, then press and hold the button on the front panel VOL-, press the remote button "DISPLAY" 3 times. Exit - click "OK" to install "FACTORY OFF", then press the "STANDBY" button on the control

TECHNIKA chassis 17MB22-2 LCD32-207 processor VCT6973G - see chassis 11AK19.

TELEFUNKEN chassis 619A, 619A-2 BS920D \ DP, CPU CCU3000.
While holding "SOUND" on the remote power switch. Hold about 10 seconds. Exit - to keep the button "SOUND MUTE" on the remote control.

TELEFUNKEN processor chassis 618 HD404018 pressing "R" "VOL" and turn on the power. Hold the button to display the SS on the indicator.
Exodus - POWER OFF

TELEFUNKEN

chassis IDC2.2.01, Processor: CCU3000 EPROM.
Television sets are based on a set series of DIGIT 2000. All adjustment are produced in the service mode using standard control buttons and keyboards local bar.
1. Swap TV in another mode.
2. Off with TV network switch.
3. Enable TV network switch when pressed the red button remote (button to hold down until the green LED illumination).
Sign in service mode is impossible if the SCART connectors present voltage> 0,9 V. Please turn off all external devices, particularly for SCART.
Service Regulation:
- Select the desired option for adjustment is carried out after choosing the appropriate regulatory group.
Group number is selected by using 1 and 0/AV.
- To select a group of regulation 10 or 11 you must press 1 and hold it until the appearance on screen povidomlennya''1 -: --'', then press the button 0 or 1.
- Change the value held by knopok''''i''-control''.
- Return to the previous installation is made using the green button. In this case will be called popuredni value from memory.
- Use the yellow button is a return to industrial installations.
- Introduction of the memory is made using red button.
- If necessary, switch to TV mode, press the blue button.
Control voltage 2-anode kinescope:
- Warmed up TV for 10 minutes.
- Sign a service mode and select group of 10 "CONFIG 10: -".
- Choose a code 06, set it to 1 and click on the blue button "VT".
- Using potentiometer SCREEN (on transformer WN) set the pointer on the scale in the middle (on a scale value should be about 090 / + -10 units.).
- Regulation should cause discoloration of the scale from red to green.
- Exit the service mode.
----------------------
Other regulations:
Settings related to the frequency generator PAL / NTSC, with geometry images, and D2-MAC decoder and PIP. In each case you should select a group of functions, then enter the appropriate code ambiguous. Regulation should be carried out by using''+'' and''-''.
Setting the TV system configuration is done by selecting regulatory groups 9, 10 or 11.
Exit from service: Click on "MUTE" control.

TELESTAR PT-92 chassis 6855, 6870 processor TDA935x/6x/8x
On TV, simultaneously pressing the "SUB-PAGE" on the remote and "VOLUME-DOWN" panel TV. Options:
OptByte1-0_PalB / G, 1_PalD / K, 7_SecB / G
OptByte2-0_SecD / K
OptByte3-7_Hotel
Exodus - "TV".

THOMSON Processor TDA12020H/N1 F00 - see chassis ETC009 - ETC010.

THOMSON chassis processor ETC210 TDA12070H/N1F00 SE1716.1 (V8-T02M61-08M15). Turn on the TV, hold button "PROG-" and "VOL-". Hold the button 8 seconds. Quit - QUIT in the service menu.

THOMSON 63MT68L, 72MT68L, 63DF68L, 25DH65J, 72DF68L, 29DH65J, 29DF65J, 85MX69L, processor ST9093 - see chassis ICC9.

THOMSON Processor ST90R91 - see chassis ICC10.

THOMSON 21DG22E, 21DK24E, 21DK24E1, 21DK24U, 21DP210G, 21DU21C, 21DU21E, 21DU22C, 21DU22E, 21DU24E, 21DX210S, 21DX25E, 21DX25EA, 21DX25ES, 21MT21E, 21MT22E, 24WK21E, 24WK22E, 24WK24E, 24WK25EG, 24WT25E, 25DG16E, 25DG16ET, 25DG17KG, 25DG21E, 25DG22E, 25DG25EG, 25DG25ES, 25DH21E, 25DH22E, 25DT21E, 25DT22E, 25DU21E, 25DU24E, 25DX210S, 25DX25ES, 25DX25KG, 25DX25KH, 25MH21E, 25MN16ET, 28DF21E, 28DF22E, 28DG16E, 28DG16ET, 28DG21E, 28DG22E, 28DG23K, 28DG24E, 28DK24E, 28DK25E, 28DK25ES, 28DK26ED, 28DN20E, 28DN22E, 28DP25EG, 28DP25ES, 28DT21E, 28DT22E, 28EX22E, 28VK24U, 28VK25E, 28VK25EG, 28VK25ES, 28VK26UW, 28WD210S, 28WF25E, 28WF25EG, 28WF25ES, 28WH200S, 28WN22E, 28WR23EG, 28WS21E, 28WS22E, 28WS24E, 28WS26EW, 28WT25ES, 28WT25ST, 28WX210S, 28WZ210S, 29DF25EB, 29DF25EG, 29DF25EL, 29DF25ER, 29DF25ES, 29DF25KG, 29DF25KH, 29DH21E, 29DH22E, 29DJ24E, 29DJ25EG, 29DL200G, 29DL21E, 29DL22C, 29DL22E, 29DL24E, 29DL25ED, 29DU21E, 29DU22E, 29DX210KH, 29DX210KP, 29DX210S, 29DX25ES, 29DX25KG, 29DZ210S, 29MH21E, 29MH22E, 32VK24U, 32VK25E, 32VK25EG, 32VK25ES, 32WF200G, 32WF25E, 32WF25EG, 32WF25ES, 32WH210S, 32WN22E, 32WS21E, 32WS23E, 32WS24E, 32WS26EW, 32WS26NW, 32WT210S, 32WX210S, 33MF22E, 33MF22EG, 33MS21E, 33MS24E, 33MS24EG, 33MS25UD 92R195B9Q0/JAM - see chassis ICC17.

THOMSON 28DT78ME, 28WS78KE/M/MP, 28DH78K, 28DU78K, 28DU88M/NE, 28DU98MP, 32VT88NP, 37WS88ME-see chassis ICC19.

THOMSON 29DC200B processor TDA9554PS/N3/2/1703 - see Chassis: ITC008.

THOMSON 21DCH61KG processor TDA12060H \ N1F00 - see chassis M61.

THOMSON 29DCH61KG processor TDA 12062H/N1F00 - see chassis M68.

THOMSON, SABA 21MG77C - see chassis TX90.

THOMSON 21MX135S processor TDA9554PS/N1/1I0674 - see chassis ТХ-807S.

THOMSON 52RW64E, 44RW65ES, 52RW65ES, 52RW77WS.
Turn on the TV, hold button "PROG-" and "VOL-".

THOMSON 14CB10C Monoblock. Processor TMPA8700-XXXX.
Simultaneously press the front of the TV "Stop" and "Pr" and turn on the power.
The first figure for the DK regime of 16 and that there should be 4, the menu for the Russian 15th and 16 and figures to be 1 and 5, respectively.

THOMSON 29DCH61KG TDA 12062H/N1F00
Sign in service menu:
Volume set to "0", hold it, click on «CAPS» three times, beginning with service mode: «EXIT» - «TV / AV».

TOPAZ 63TTS-6476 processor SDA5522 A005. Video STV2248H - see CPU SDA5522.

TOPFIELD CE-6432 processor 8827CPNG4RV8 - see chassis M13, M17.

TOSHIBA 29VH36G - see chassis 11AK53.

TOSHIBA chassis C7SS 28W7D processor TMP87CS38N-3477,
PD1563 21CSZ2R processor chassis MN101EO4GAC, 338U1M87,
chassis S5E C6S 2050 2150, 1478XR, 1450, 1458, 20N3 2163DB/DD/DF/DN/DS processor M3722M6-A80SP/A81SP/B80SP/B84SP,
chassis S6E 2160XHC M37222M4-C87SP,
chassis S8E. S9E, 21G3XHE, 21G3XR processor TMP87CK38N, video-TB1231CN,
14A3E/14A3R/14A3M/14A3MJ/14A3H processor 21A3TR/R/M/MJ (87CK38N-3DV8),
2185XR, 29AX9UM.
Click on "MUTE" on the remote control. Click on it again and hold "MENU" on TV.
Buttons 1, 2, 3 "- cutoff R, G, B," 4 "- kopektsiya kontpasta," 5 "-" Color trickness "," 6 "-" TNTC "(self-dependent color PAL -NTSC-SECAM), "8" - test audio signal at a frequency of 1 kHz, "9" - Self, "AV" - vybip test signal. Enable test signal: a service profile, click => on the remote control.
Init memory: a service mode, press the "CALL" and "CHANNEL (s)" simultaneously. Attention! You may not initialize memory until replaced by the chip.
To counter skyduvannya protection "0" and simultaneously press CALL CHANNEL (t) on TV.
Exodus - POWER OFF.
Update: on TV, where there is no button "MENU", a small hole in the front which button - press match.

TOSHIBA chassis TMC574A VTD1420 processor 195C6PC00ECF011A, video STV2246H - login service: click on "Vol-" on the front of TV while "6" on the remote control. Options as INIT January 2000 - the second line CRT on 9A4E.

TOSHIBA 2512-DD, 7010HYP (chassis C5, processor SONY CXP80420-121). Simultaneously press the "F" and "AV" on the remote, then enter code 1048.

TOSHIBA 2929DD, 2812DS CPU CXP80424-144
While holding "F" command from the remote file "AV". Then you type "1" "0" "4" "8" when set to 1048 numbers will appear white. After a few seconds appear in the right corner of the letter "M". Press and hold button "F" press "9", will test.
Press and hold button "F" click "2" - screen goes blank but the sound is. Press and hold button "F" click "Z" - will display settings that your TV from position 16 to 43 (to change position by pressing the "z". Will grow if you make a button "S" positions will be reduced). Exodus - POWER OFF

TRILUX PB410 TAP214x T / TN / TNP / TNX / TNPX, TAP254x T / TN / TNP / TNX / TNPX, TAP284x T / TN / TNP / TNX / TNPX processor SDA5052M C17
Close Out 1967 IC501 CPU to "block". Enable TV network switch when you click "P +" and "P-" panel TV. 


In TVs with versions 1.06 or higher processor - additionally click on "HOLD" control. Exit: "MENU" or "i" or turn off the power.
TV2KF, TV2K, TV3K chassis - both on the remote and press OK SERVICE, or SERVICE (on chip remote lock pins 11 and 25) and then OK. You receive the first group of parameters. Clicking OK results in the transition to other group settings.
To capture "lock" on TV just click the green several times in succession (RR) button on the remote control. Then go to the menu and remove the "lock" ..

TV2KM chassis, processor ST92T195D7B1/MNK. Press hidden button on the remote control (located under cursory button down triangle in the bottom row of buttons - the average, to break the window and set the button). Navigating the menus "P +", "P-", control settings buttons "VOL +" VOL-. To go to the submenu click "OK". Out of service - "STANDBY".

TV2KY chassis, processor LC863532B.
Method One: Click on the remote control button "FACTORY" in the absence of press "MENU" and until the menu screen displayed on the TV remote control Enter the code "6" "4" "8" "3". Exit - as "MENU 6483" or "PP".
Method Two: Closed pins 2 and 16 circuits HC7461 (hidden bottom left button) on the remote control. To remember the settings and exit the menu item 03 MENU PROD MODE, set it to "0" and press "MENU".

TV4K chassis - to enter the service mode button on the remote control is "SERVICE", near the buttons "STOP" and "CANSEL". If you press "SERVICE" should not be turned on any TV menu. In service mode: when you click "OK" - directed to the "SERVICE 2", clicking "ENTER" - transition to regimes "SERVICE 3" and "SERVICE 4." Button "PP" - out.

TV8, TV9, TV17 chassis. Sign in service: turn the power button, hold unopky "VOL +" and "P-" on the front panel for 5 seconds and not pidpuskayuchy them on the remote control (remote control 204), press simultaneously the buttons "PICTURE MENU" (red or yellow) and VIDEOTEXT (blue). If there is no "native" control, the MAC code on the remote 1141 or 1041. Output - power off or press TV (in the native remote control). Plunk group settings - buttons "P +", "P-", choose option - click "PICTURE MENU" (yellow or red), change the settings - buttons "VOL + , "VOL-", remembering the changes - click OK.
If there is a remote control RC-5, instead of two buttons to press or TV EXIT (picture of screen output from the AV).
TV4, TV8, TV9 chassis. From any standard remote control RC-5 can provide the command "TV", it is similar to the team with home console when you press the red and blue buttons.
TV17 - for removing the protection of children need a service mode, and then click the "up-down menu to reach the" Reset Child Protection ", then click" right "set to" 1 "and click" OK ".

TV84 chassis, processor S3P8837 + STV2118 - on the remote press HOLD (text stop key), MIX (text mix key) and BLUE (blue key).

TV91 chassis, processor SAA5290 (CTV810S) - the entrance to the service: supply by remote control in RC5-code the address of 7 and command code 0 or 58 (figures are in decimal notation) or closed 20th leg CPU "LED" on mass. The team must be submitted when the TV is in safe mode or view programs.

TX807, TX807C, TX90, TX91, TX92, TX92F TX-807, TX-807C, TX-90, TX-91, TX-92, TX-92F chassis, processor ST9291 - off with remote control, then power off. Turn the power while pressing the teletext button on the remote (blue). If not work, then let go and teletext button again to quickly press. Lights service menu. Exodus - POWER OFF.

UNIMOR, SIESTA-3 Processor SDA20562-A508, SDA20562-A515/A522.
Lock output processor 21 of the mass. Click on the TV "P +" and "P-" and turn on the power. Exodus - POWER OFF.

UNIVERSUM chassis E6, FT4261/70/81/83/A FT-4275 processor SAB-C502-2R20N,
Chassis E9, SDA5255-052 processor, video TDA884x.
Enable TV, exit to the next operating mode for 5 seconds and consistently press "TV", "i", "STOP".
Entry from Mak Maxi 2002: Code = 1273.
Value only son of buttons:
"TV" = Rec / Erase
"I" = <</ RADIO
"STOP" => / LNB
All buttons in the two lower ranks.
Shift MODE = PICTURE MENU
Shift H / V = Sound MENU
------------------------
Exodus - POWER OFF.

UNIVERSUM FK81011 STV6387.
Consistently within 4 seconds. click: "VOL-" on the front of TV on the remote "PROG" "-" "?". Exodus - POWER OFF.

UNIVERSUM 7500. Transfer to regular TV mode then quickly several times "MENU" "TV" "Info".
Enable D / K - press the red button, in addition, five IF OPT change penultimate bit (on the remote press 3). Exodus - POWER OFF

UNIVERSUM FT7174C processor SDA2084-A012.
1. Click on the remote control "P / C" and click "SERWISE" on the front of TV.
2. Lock pins 16 and 24 on the processor and turn on the power.
Buttons "1-9" select remote mode settings. "22-R" "23-G" "24-B" "25-HO" "26-HF" "27-VL" "1928-VC" "29-VA" "1932-HA".
Save settings - click "P / C" "-" on the remote control.
Exodus - POWER OFF.

UNIVERSUM FT7199 processor SDA30C264M.
1.Vymknuty TV is another mode.
2.Natysnuty "Volume-" on the front and both "MENU" button on the control.
3.Vidpustyty "Volume-" and "MENU". Dial consistently "TV", then "i" on the remote control.
4.Na front of the TV lights up red LED, push the red button on the remote start button and the "i" - TV switch, then press the remote button "i"-lights up "SERVISE"
Remember - "OK."
Exit - turn off the TV from the network.

UNIVERSUM FT-8188 processor SDA30C264M - see chassis 11AK18.

VESTEL Processor CTV422M VE1 - see chassis 11AK08.

VESTEL CPU ST92195 - see chassis 11AK19 and 11AK20.

VESTEL chassis 17MB22-2 processor VCT6973G - see chassis 11AK19.

VESTELProcessor ST92195C7B1/MIF - see chassis PT90.

VESTEL Processor TDA9353PS/N1/3S0342 - see chassis PT92.

VIDIMAX 74TTS-721 (VD2960TF), Processor: VCT3831A.
Sign in service: in the menu to switch to English, exit the menu, press the "CAPS", release the button and immediately press "REVEAL".

VIDIMAX VD2151TF processor ST92T195D7B1/MNK - see chassis TV2KM.

VIDO Chassis CH-1920 CPF-29T99 processor TDA9594H/N1/SI.
With remote install "VOL" at a minimum, then press and hold the "MUTE" on the remote and press "MENU" on TV.

VIKING 54CTV-6741.
The central board enabled when the TV and lock pins XN1 XN2.

VITYAZ (Knight) MSH-37 chassis 37CTV -730 processor ST92195B2, video STV2249E.
Sign in technological menu can be made in two ways:
- The operating contact connector briefly closed 1XN1;
- In the next screen, click successively on the remote control buttons: "M", "OK", "mute", "duty mode".
When you log in technological first menu item - "Configuration". The following paragraphs: "Setup TV», «Setting KVN", "Memory", "Password", "Initialize" can be selected using the buttons "+ R" and "R-". Enter any submenus by using the key "OK" at the appropriate point.
Exit from any submenu is pressing «ESC». The value of each sub menu buttons can be changed "+" and "-".
To save the settings click the button "M" on the remote control.
Exit from the technological menu is a button «ESC».
The menu item "Preferences WHC in the described model is not activated.
After replacing the memory when installing the cursor to the line "Initializing" and click "OK" then "?" The record in memory of certain values of different parameters, providing a TV performance.

VITYAZ MSH-66 chassis 37/51/54 CTV 6611, 37/51 CTV 6621, 51CTV 6711/6721, 54CTV 6641/6651/6741/6751 - in remote RC-5 (IC SAA3010, INA3010) to terminals 27 and 17 connect button enter the service menu. Saving changes: click on "M", is based on the submenu. Exodus - "ESC".

VITYAZ MSH-chassis 69 63CTV6151-1, 63CTV6601, 63CTV6642, 63CTV6644, 63CTV6687-303, 72CTV6642, 70CTV6151, 72CTV6644, 72CTV6687-403, SDA555XFL-A14. Entrance to the TV service menu you can make short-circuits on the board connector XN1 BU-90m. To save memory in the TV settings tehnomenyu click on the "M" on the remote control.

VITYAZ MSH-71 chassis 38CTV710-1TS, 54CTV740-1TS, 54CTV770-1TS processor TDA9353PS/N3.
1. With remote Knight: STBY-M-OK-MUTE-STBY.
2. With remote Horizon: STBY-i-SEL-MUTE-STBY.

VITYAZ MSH-73 chassis 15CTV720-3, 21CTV780-3 processor: TDA9381PS/N3/1/1752, TDA9352PS/N3/2/1925, TDA9352PS/N3/2/1116.
Sign in service mode exercise in two ways:
1. operating quickly contacts lock connector XN1;
2. in safe mode click on the remote button sequence M, OK, MUTE, STBY.
Remote control buttons in the service mode ayut following meanings:
P + / - - navigate menus;
Vol + / - and OK - choice of parameters;
AV - out of the swing;
ESC or AV - out of service mode.

VITYAZ MSH-76 chassis 25CTV720 29CTV720 TDA9365PS/N3/5.
Sign in service mode: operating quickly contacts lock connector XN1.

VITYAZ MSH-90 chassis 51/54CTV-6722 51/54CTV-6622-2 51/54CTV-6622-2M, processor SDA5521 A003 RC7-2.
Button "i" - entrance / exit to a service mode. Exit - close contacts XN1 near the processor.

VITYAZ MSH chassis 1954-93S 6643-2T CTV processor TDA9351PS/N2/1I0981.
Sign in service menu: STBY-M-OK-MUTE-POWER.
Exodus - ESC or TV.

VITYAZ 51/54CTV-6722 processor 555XFL.
Sign in service mode - close contact XN1 about the processor.
Sign in service mode with universal remote MAK 2002 (maxi), code 1310 teletekstova button with "i".
Button "M" button console meets Knight DISPL RC-5 remote control OK button image corresponds Knight SEL PIC RC-5.

VITYAZ 37/51/54 CTV 6623-2 processor TDA938IPS/H2/LI.0980.
In regular mode, press the button on the control point: "M" OK "" MUTE "" POWER ON ". Exodus - TV.

VITYAZ 63CTV6341 - in safe mode press:
[M] (2 seconds) [OK] (2 seconds) [MUTE] (2 seconds) [Power OFF].

WALTHAM WT821.
With remote control TV "Horizon" graphics without clicking "service mode ICE", the indicator shows CH, click again - will be OP, then choose the volume of registers numbers "1-4" and numbers "1-9" change bits. Then press the 'Memory'.

WATSON14CTV730-3 processor: TDA9381PS/N3/1/1752 - see VITYAZ MSH-73 chassis.

XORO LCD HTL3215W.
TV menu, select "Protection of Children," with more control dial 7, red, 9 blue, button to confirm entry M.

YOKO TV6399TSN, TV5599TSN, TV5490TSN processor ST9 MONICA 5.
On TV, pressing the button a few seconds "VOL-" and "VOL +" on the front of the TV.
Exit: CLEAR button or power off.

ZENITH IQB64W10W.
Codes:
8-6-5-4-5-6-8
7-5-3-2-3-5-7
6-4-2-1-2-4-6
7-5-3-2-3-5-7
8-6-5-4-5-6-8
Dial control with one of the codes and press "ENTER" or "DISPLAY".
Exodus - POWER.

ZENITH IIQB27FW IQC50W94
Dial the remote control code 9-8-7-6 and press "ENTER" or "DISPLAY", beginning - "POWER".

ZENITH Enable [MENU] and within two seconds, click the following key: [9], [8], [7], [6], [INTER]-or-[9], [8], [7], [6] , [DISPLAY] You will now have access to the service menu.
[MENU] = switches between the two menu pages. [UP], [DOWN] = cursor selects the item (item) to adjust. [LEFT], [RIGHT] = cursor changes values. [POWER] = mode exit and save.



at

No comments:

Post a Comment

The most important thing to remember about the Comment Rules is this:
The determination of whether any comment is in compliance is at the sole discretion of this blog’s owner.

Comments on this blog may be blocked or deleted at any time.
Fair people are getting fair reply. Spam and useless crap and filthy comments / scrapers / observations goes all directly to My Private HELL without even appearing in public !!!

The fact that a comment is permitted in no way constitutes an endorsement of any view expressed, fact alleged, or link provided in that comment by the administrator of this site.
This means that there may be a delay between the submission and the eventual appearance of your comment.

Requiring blog comments to obey well-defined rules does not infringe on the free speech of commenters.

Resisting the tide of post-modernity may be difficult, but I will attempt it anyway.

Your choice.........Live or DIE.
That indeed is where your liberty lies.

Note: Only a member of this blog may post a comment.