PHILIPS 20CT4426 /08Z SEGANTINI CHASSIS KT4 UNITS VIEW.

- SOUND UNIT:3122 127 41130 4822 212 21301

- TRD4 CONTROL UNIT:3122 127 40970 4822 212 21193 WITH D8049PC (NEC)
ER1400 M5G1400 1400 BIT ELECTRICALLY ALTERABLE ROM (MITSUBISHI)

- POWER SUPPLY UNIT:3112 123 3733.0 8222 280 3198.3 8222 280 3201.2

SAB3034 COMPUTER INTERFACE FOR TUNING AND CONTROL (CITAC)

GENERAL DESCRIPTION
The SAB3034 provides closed-loop digital tuning of TV receivers, with or without a.f.c., as required. lt
also controls up to 8 analogue functions, 4 general purpose I/O ports and 4 high-current outputs for
tuner band selection.
The IC is used in conjunction with a microcomputer from the MAB84OO family and is controlled via a two-wire, bidirectional I2 C bus.
Featu res
Combined analogue and digital circuitry minimizes the number of additional interfacing components
required
Frequency measurement with resolution of 50 KHz
Selectable prescaler divisor of 64 or 256
32 V tuning voltage amplifier
4 high-current outputs for direct band selection
8 static digital to analogue converters (DACSI for control of analogue functions
Four general purpose input/output (l/O) ports
Tuning with control of speed and direction
Tuning with or without a.f.c.
Single-pin, 4 MHZ on-chip oscillator
I2 C bus slave transceiver

FUNCTIONAL DESCRIPTION
The SAB3034 is a monolithic computer interface which provides tuning and control functions and
operates in conjunction with a microcomputer via an I2 C bus.
Tuning
This is performed using frequency-locked loop digital control. Data corresponding to the required tuner
frequency is stored in a 15-bit frequency buffer. The actual tuner frequency, divided by a factor of 256
(or by 64) by a prescaler, is applied via a gate to a 15-bit frequency counter. This input (FDIV) is
measured over a period controlled by a time reference counter and is compared with the contents of the frequency buffer. The result of the comparison is used to control the tuning voltage so that the tuner frequency equals the contents of the frequency buffer multiplied by 50 kHz within a programmable tuning window (TUW).

The system cycles over a period of 6,4 ms (or 2,56 ms), controlled by the time reference counter which is clocked by an on-chip 4 lVlHz reference oscillator. Regulation of the tuning voltage is performed by a charge pump frequency-locked loop system. The charge IT flowing into the tuning voltage amplifier is controlled by the tuning counter, 3-bit DAC and the charge pump circuit. The charge IT is linear with the frequency deviation Af in steps of 50

D8049AH

8-Bit Microcontroller-Microcomputer - Over 96 instructions, all 1-2 cycles
Intel
8-Bit Microcontrollers
Clock Frequency - Max. (Hz)=11.0M
Clock Frequency - Min. (Hz)=1.0M
Min Instruction Length (bits)=8
Max Instruction Length (bits)=16
Memory Addressing Range=64k
Number of Addressing Modes=5
On-Chip RAM (Bytes)=128
On-Chip ROM (bytes)=2k
Number of Interrupt Lines=1
No. of Non-Maskable Interrupts=0
Number of Maskable Interrupts=1
Number of I/O Lines=16
No. of I/O Ports=2
Vsup Nom.(V) Supply Voltage=5.0
Package=DIP
Pins=40
Military=N
Technology=NMOS