Tuning system in this set is a voltage synthesized tuner controlled by a sophisticated
and complex unit called Abstimm Baustein 29502.003.24 (Tuning Unit) which features all the functions of the set
via ASIC ICs and a uC (Microcontroller) from Texas Instruments TMS1100. Additional ASICs TMS1100P1072B (Uc Masked) TMS 3755 . ICs SN29799N , 2x TMS3529nl (Channel Memory), TMS3731bnl SN29762N.
TDA1082
East-West correction driver circuit
East-West correction driver circuit TDA1082:
GENERAL DESCRIPTION
The TDA1082 is a monolithic integrated circuit driving east-west correction of colour tubes in television receivers.
The circuit can be used for class-A and class-D operation and incorporates the following functions:
· differential input amplifier
· squaring stage
· differential output amplifier with driver stage
· protection stage with threshold
· switching off the correction during flyback
· voltage stabilizer
QUICK REFERENCE DATA
PACKAGE OUTLINE
16-lead DIL; plastic (SOT38); SOT38-1;
Supply voltage (pin 1) VP typ. 12 V
Current consumption IP typ. 17 mA
Total power dissipation Ptot max. 600 mW
Operating ambient temperature range Tamb 0 to + 70 °C
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TUNER 29502.001.09
IF UNIT 29502.002.01
CHROMA (FARB BAUSTEIN) 29502.004.01
RGB MATRIX (RGB BAUSTEIN) 29502.005.02
SOUND AMPLIFIER (NF BAUSTEIN) 29502.007.01
LINE RETURN (RUECKLAUF BAUSTEIN) 29502.013.01
TRACE SCAN (HINLAUF BAUSTEIN) 29502.014.01
FRAME UNIT (VERTIKAL BAUSTEIN) 29502.011.01
E/W CORRECTION UNIT (OST/WEST BAUSTEIN) 29502.012.01
COMMAND UNIT (STEUER BAUSTEIN) 29502.010.01
SUPPLY UNIT (NETZTEIL BAUSTEIN) 29502.009.01
TDA3501 VIDEO CONTROL COMBINATION:
The TDA3501 is a monolithic integrated circuit performing the control functions in a PAL/SECAM
decoder which additionally comprises the integrated circuits TDA3510 (PAL decoder) and/or
TDA3520 (SECAM decoder).
The required input signals are: luminance and colour difference —(R-Y) and —(B-Y),
while linear RGB signals can be inserted from an external source.
RGB signals are provided at the output to drive the video output stages.
The TDA3501 has the following features:
- capacitive coupling of the input signals
- linear saturation control
- (G-Y) and RGB matrix insertion possibility of linear RGB signals, e.g. video text, video games, picture-in-picture, camera or slidescanner
- equal black level for inserted and matrixed signals by clamping
- 3 identical channels for the RGB signals
- linear contrast and brightness control, operating on both the inserted and matrixed RGB signals
- horizontal and vertical blanking (black and ultra-black respectively) and black-level clamping
obtained via a 3-level sandcastle pulse
- differential amplifiers with feedback-inputs for stabilization of the RGB output stages
- 2 d.c. gain controls for the green and blue output signals (white point adjustment)
- beam current limiting possibility
QUICK REFERENCE DATA
Supply voltage V524 typ. 12 V
Supply current I5 typ. 100 mA
Luminance input signal (peak-to-peak value) V15_24(p_p) typ. 0,45 V
Luminance input resistance R15_24 typ. 12 kfl
Colour difference input signals (peak-to-peak values)
—(B-Y) V1g_24(p_p) typ. 1,33 V
R-Y) V17-24cp-pi tvr>- 1.05 V
Inserted RGB signals (peak-to-peak values) V12,13'-|4_24(p_p) typ. 1 V
Three level sandcastle pulse detector V1Q_24 typ. 2,5/4,5/8,0 V
Control voltage ranges
brightness V2024 I to 3 V
contrast V19_24 2 to 4 V
saturation V16_24 2,1 to 4 V
TDA2593 HORIZONTAL DEFLECTION CONTROL FOR COLOR TV SET
DESCRIPTION
The TDA2593 is a circuit intended for the horizontal
deflectionof color TVsets, suppliedwith transistors
or SCR’S.
.LINE OSCILLATOR(two levels switching)
.PHASE COMPARISON BETWEEN SYNCHRO-
PULSE AND OSCILLATOR VOLTAGE
Ø 1, ENABLED BY AN INTERNAL PULSE,
(better parasitic immunity)
.PHASE COMPARISON BETWEEN THE FLYBACK
PULSES AND THE OSCILLATORVOLTAGE
Ø2
.COINCIDENCE DETECTOR PROVIDING A
LARGE HOLD-IN-RANGE .FILTER CHARACTERISTICS AND GATE
SWITCHING FOR VIDEO RECORDER APPLICATION
.NOISE GATED SYNCHRO SEPARATOR
.FRAME PULSE SEPARATOR
.BLANKING AND SAND CASTLE OUTPUT
PULSES
.HORIZONTAL POWER STAGE PHASE LAGGING
CIRCUIT
.SWITCHING OF CONTROL OUTPUT PULSE
WIDTH
.SEPARATED SUPPLY VOLTAGE OUTPUT
STAGE ALLOWING DIRECT DRIVE OF
SCR’S CIRCUIT .SECURITY CIRCUIT MAKES THE OUTPUT
PULSE SUPPRESSED WHEN LOW SUPPLY
VOLTAGE.
TDA2030 DESCRIPTION
The TDA2030 is a monolithic integrated circuit in
Pentawatt package, intended for use as a low
frequency class AB amplifier. Typically it provides
14W output power (d = 0.5%) at 14V/4Ω;at ± 14V
the guaranteedoutput poweris 12W on a 4Ω load
and 8Won a 8Ω (DIN45500).
TheTDA2030provideshighoutputcurrentandhas
very lowharmonic and cross-over distortion.
Further the device incorporates an original (and
patented) short circuit protection system compris-
ing an arrangement for automatically limiting the
dissipated power so as to keep the working point
of the outputtransistorswithin their safe operating
area.A conventionalthermal shut-downsystem is
also included.
SHORT CIRCUIT PROTECTION
The TDA2030 has an original circuit which limitsthe
current of the output transistors , the maximum output current is a function of the
collector emitter voltage; hence the output transis-
tors work within their safe operating area .
This functioncan thereforebe consideredas being
peak power limiting rather than simple current lim-
iting.
It reducesthe possibility that the devicegetsdam-
aged during an accidental short circuit from AC
output to ground.
TDA4290-2
Bipolar IC
Tone control IC for the DC voltage control of volume, treble, and bass. The volume characteristic
can be changed from linear to physiological.
For mono application we recommend the TDA 4290-2, while the TDA 4290-2 S is especially
suitable for stereo application.
Features
Few external components
High signal—to—noise ratio
Low total harmonic distortion
Complies with the IEC 268-3 standards
Maximum ratings
Supply voltage V5 18 V
Control inputs V5, V5, V14 0 to vs V
Input signal V8,,“ 3 V
Load current I; 10 mA
Junction temperature 7; 150 “C
Storage temperature range Ts,g -40 to 125 “C
Thermal resistance (sysIem—air) Rm SA 90 K/W
Operating range
Supply voltage vs 10.5 to 18 V
Volume control V5 0 to 0.51 x V2 V
Frequency (—1 dB) fi 20 to 20,000 Hz
Ambienttemperature TA 0 to 70 ‘ “C
Current consumption Is 35 50 I mA
Relerence voltage V; 45 485 5.2 ‘ V
Input resistance Rig 2.9 3.9 kfl
Output resistance Ru 3/5 200 Q
Changeover current [4 3.5 mA
Input current for set inputs ‘I5/em 4 20 pix
GRUNDIG ELEGANZ 8245 /30 SERIE 30T26SL CHASSIS GSC600 Microcomputer processing approach for a non-volatile TV station memory tuning system:
A tele
vision tuning system having a non-volatile memory for storing
digital tune words is electrically updated by a microcomputer type
architecture control circuitry. A ROM memory matrix is provided for the
storage of VHF minimum and maximum binary tune words corresponding to
each of twelve VHF channels in addition to a UHF minimum and maximum
binary tune word encompassing all possible 72 UHF channels. Tuning of
individual VHF and UHF chanels is accomplished by incrementing or
decrementing a given tune word within the minimum and maximum limits
established in the ROM memory matrix by means of a microcomputer
processing approach.TMS1000 General
General Information:
Texas Instruments was locked in a race with Intel to create the first microprocessor. By most accounts Intel won with the 4004, but there are a few die hard TI fans who say the TMS1000 was first, because it was the first “computer on a chip” and that the 4004 was just a calculator chip.
Texas Instruments followed the Intel 8080 with the 4-bit TMS1000. So, while Intel was leading the industry in microprocessors, TI led with this industry unique design "a computer on a chip", specifically designed for control and automation purposes. The 1000 was the first MCU (MicroComputer Unit) , which is an MPU (MicroProcessor Unit) with other support chips (such as RAM, ROM, counters, timers, I/O interfaces) integrated on to the same silicon chip.
The original 1000 family consists of 6 chips the TMS1000 and TMS1200 are basic chips, the TMS1070 and TMS1270 are high voltage versions to interface to displays, the TMS1100 and TMS1300 provide twice the on-board ROM and RAM. The TMS1000, TMS1070, and TMS1100 are 28-lead packages, the TMS1200, TMS1270, and TMS1300 are 40-lead versions of the same chips (just 200 to the 28-lead chip numbers).
In the 80's TI added to the 1000 family. The 28-lead TMS1170 started with a TMS1100 base and added fluorescent display drive capability and expanded memory (2KB ROM). The TMS1370 was the same as the TMS1170 and added 27 I/O lines. An expanded memory group based on the original TMS1000 chips was also created. They were the TMS1400, TMS1470, and TMS1700 (64 Bytes RAM, 4KB ROM). There were 40-lead versions of the TMS1400 and TMS1470, which because the TMS1600 and TMS1670. CMOS versions were also added, denoted with a "C" suffix, such as TMS1200C.
The TMS1000 also had system evaluator chips. The original evaluator chips were the TMS1098 and TMS1099. These 64-lead evaluator chips were ROM-less versions of their corresponding standard chips. The TMS1099 supported the TMS1000/TMS1200 and the TMS1070/1270. The TMS1098 supported the TMS1100/1300. Later evaluators were introduced to support the entire TMS1000 family, they were the SE1000P (supports TMS1000,1070,1200,1700), SE2200P (supports TMS1100,1170,1300,1370), and the SE1400P (supports 1400, 1470, 1600, 1670).
The success of the the TMS1000 is demonstrated by its long lifecycle (over 20 years) and its expanded product line. The TMS1000 is found in many appliances, control systems, and games. Most of these chips were sourced by companies for direct use in their products and will have custom or house numbers on the chips (not the standard numbers listed above). Even TI used custom numbers in its products. The TMS1000 was used as a customized chip in the Texas Instruments "Speak and Spell" educational toy line (See Pictures at bottom).
1. A broadcast re
ceiver tuning system for tuning said broadcast receiver to a selected frequency comprising: first means for storing digital tune words responsive to a binary address for outputting a selected said digital tune word,
second means for storing said selected digital tune word and said binary address operably associated with said first means for storing,
a microcomputer operable for selectively changing said digital tune words in said first and second means for storing, and
means for converting said digital tune word stored in said second means for storing into an analog voltage operative to tune said broadcast receiver to said selected frequency.
2. A tuning system of claim 1 wher
ein said microcomputer comprises:
means for incrementing and decrementing said digital tune word stored
in said second means in updating said digital tune word, means for providing a plurality of operating instructions and logic functions operative of said microcomputer,
means for storing binary data responsive to said binary address and said instructions operative for incrementing and decrementing said digital tune word stored in said second means for storing, and
means for inputting control functions operably associated with said means for providing a plurality of operating instructions.
3. A tuning system of claim 1 wherein said means for converting comprises: a pulse width modulator generator for outputting a digital signal proportional to said digital tune word, and
a digital to analog converter for converting said digital signal into said analog voltage for tuning said broadcast receiver to said selected frequency.
4. A tuning system of claim 1 wherein said broadcast receiver comprises a television set.
5. A tuning system of claim 1 wherein said first means for storing digital tune words comprises a nonvolatile random access memory.
6. A tuning system of claim 1 wherein said second means for storing said digital tune word and said binary address comprises a shift register.
7. A tuning system of claim 2 wherein said means for incrementing and decrementing comprises an arithmetic logic unit.
8. A tuning system of claim 7 wherein said arit
hmetic logic unit comprises: a plurality of shift registers, a one bit full adder operably associated with said plurality of shift registers for adding and subtracting said digital tune words and said binary data stored in said plurality of shift registers, and
means for storing said digital tune words and said binary data operably associated with said plurality of shift registers and said one bit full adder.
9. A tuning system of claim 2 wherein said means for providing a plurality of operating instructions and logic functions comprises: a program counter,
an instruction memory responsive to said program counter for outputting binary instructions, and
a program logic array responsive to said binary instructions for outputting a plurality of said logic functions.
10. A tuning system of claim 9 further including a microprogram counter operably associated with said program counter.
11. A broadcast receiver tuning system for tuning said broadcast receiver to a selected frequency comprising: a first memory matrix
for storing digital tune words corresponding to said selected frequency, means for generating a binary address for addressing said digital tune word from said first memory,
means for storing said binary address and said addressed digital tune words operably associated with said first memory and said means for generating said binary address,
means connected to said address and tune word storing means for incrementing and decrementing said addressed digital tune word for updating said digital tune word,
means responsive to said binary address for outputting selected binary data from a second memory matrix, said binary data used for incrementing and decrementing said addressed digital tune word,
means connected to said incrementing and decrementing means for providing a plurality of operating instructions and logic functions operative for updating said digital tune word,
means for inputting control functions operably associated with said means for providing a plurality of operating instructions, and
means for converting said addressed digital tune word into an analog voltage operative to tune said broadcast receiver to said selected frequency.
12. A tuning system of claim 11 wherein said digital tune words further correspond to a plurality of VHF and UHF television channels.
13. A tuning system of claim 11 wherein said means for storing said binary address and said addressed digital tune word comprises a shift register.
14. A tuning system of claim 11 wherein said means for incrementing and decrementing comprises: a plurality of shift registers,
a one bit full adder operably associated with said plurality of shift registers for adding and subtracting said digital tune words and said binary data stored in said plurality of shift registers, and
means for storing said digital tune words and said binary data operably associated with said plurality of shift registers and said one bit full adder.
15. A tuning system of claim 11 wherein said means for providing a plurality of operating instructions and logic functions comprises: a program counter,
an instruction memory responsive to said program counter for outputting binary instructions, and
a program logic array responsive to said binary instructions for outputting a plurality of said logic functions.
16. A tuning system of claim 11 wherein said means for inputting logic control functions comprises an input logic status switch.
17. A tuning system of claim 11 wherein said means for converting comprises: a pulse width modulator generator for outputting a digital signal proportional to said digital tune word, and
a digital to analog converter for converting said digital signal into said analog voltage for tuning said broadcast receiver to said selected frequency.
18. A tuning system of claim 15 further including a microprogram counter operably associated with said program counter.
19. A tuning system of claim 14 further including an automatic channel shift encode for normalization of a binary VHF increment value comprising one of said binary data stored in said second memory matrix.
20. A television tuning system for tuning said television to a selected VHF and UHF channel comprising: a first memory matrix for storing digital tune words corresponding to said VHF and UHF channels,
means for generating a binary address on a multibus line for outputting said digital tune words from said first memory,
a shift register operably associated with said first memory and said means for generating a binary address for storing said digital tune word and said binary address,
an arithmetic logic unit for incrementing and decrementing said digital tune word stored in said serial shift register in updating said digital tune word,
means for providing a plurality of operating instructions and logic functions operative in updating said digital tune word, a second memory matrix for storing binary data used in incrementing and decrementing said digital tune word, said second memory matrix responsive to said binary address and said operating instructions, said second memory matrix also operably associated with said arithmetic logic unit,
an input logic status switch for inputting control functions operably associated with said means for providing a plurality of operating instructions,
a pulse width modulator responsive to said digital tune word stored in said shift register for outputting a digital signal proportional to said digital tune word, and
means for converting said digital signal to an analog voltage operative to tune said television to said selected UHF or VHF channel.
21. A tuning system of claim 20 further including an automatic channel shift encode for normalization of a binary VHF increment value comprising one of said binary data stored in said second memory matrix.
22. A tuning system of claim 20 wherein said means for providing a plurality of operating instructions and logic functions comprises: a program counter,
an instruction memory responsive to said program counter for outputting binary instructions, and
a program logic array responsive to said binary instructions for outputting a plurality of said logic functions.
23. A tuning system of claim 22 further including a microprogram counter operably associated with said program counter.
Description:
BACKGROUND OF THE INVENTION
This invention relates in general to the tuning of a broadcast receiver, and more particularly relates to the tuning of a television receiver using a non-volatile memory for storing binary tuning words that are electrically updated by a microcomputer type architecture control circuitry.
Previously developed electronic channel tuning systems have not been sufficiently flexible to enable wide-spread use for a variety of different types of television sets in applications. For example, certain previously developed systems have required extremely uniform varactor tuning diodes to enable channel tuning, thereby allowing insufficient tolerances for conventional variances between varactor diodes. Other previously developed systems have not been sufficiently modular to enable a selection of various types of channel access or displays. Moreover, previously developed electronic channel tuning systems have not been sufficiently economical to fabricate and have required uneconomical printed circuit boards or other uneconomical fabrication techniques for construction. For example, certain prior systems have required expensive potentiometers for each channel desired to be tuned. In addition, previously developed electronic television tuning systems have not satisfactorily satisfied recent regulatory requirements which call for a television tuner to provide a comparable capability and quality of tuning for both VHF and UHF stations. Specifically, such prior tuning systems have not enabled selection of precise UHF channels, nor have the prior systems provided means for easily changing selected UHF channels.
A major disadvantage in the channel tuning sections of television receivers has been the inability to electronically program and store tune voltages under all operating and non-operating conditions without using an auxiliary power source or a mechanically programmed memory. Existing electronically operable tuners are dedicated electronic circuitry to program tune voltage information in volatile memories where the volatile memories require batteries to provide standby power when the main power source is removed. The batteries are undesirable because they represent an additional cost to the manufacturer and a present a long-term tune voltage jeopardy if they fail when the main power source is removed. Memory loss due to battery failure can occur if there are poor battery connections, battery corrosion, or excessive battery drain. Other tuning systems use potentiometers to retain the channel tune voltage, but are also undesirable because they are not electronically alterable, and require a potentiometer for each channel to be tuned.
In accordance with the present invention, the undesirable characteristics are eliminated by using a non-volatile DIFMOS memory matrix to store the channel tune voltages. The DIFMOS memory (dual injection floating gate MOS technology) is electronically alterable and has a projected memory retention capability of over 100 years with power removed. The control circuitry for the system uses a microcomputer type architecture to integrate the user control inputs and to generate the signals needed to access and alter the DIFMOS memory matrix. A principal advantage of this type of control compared to the dedicated control circuit approach is the ease with which different manufacturers' system requirements can be satisfied by simply reprogramming the algorithm of the instruction memory.
Accordingly, an object of the present invention is to provide an electronically programmable television tuning system having a non-volatile memory matrix for the storage of binary tune words.
Another object of the present invention is to provide electronic alterable tuning means for a broadcast receiver using a microcomputer approach, thereby eliminating the need for dedicated control circuitry.
Yet another object of the present invention is to provide means for electronically updating binary tune words of a selected channel in the tuning of a television receiver and for storing the updated binary words in a non-volatile memory matrix.
Still a further object of the present invention is to provide a means for generating a binary tune word corresponding to a selected UHF or VHF channel within the limits of a binary minimum and maximum word stored in a memory matrix.
SUMMARY OF THE INVENTION
A television tuning system is taught having a non-volatile RAM memory for storing digital tune words that are electronically u
pdated by a
microcomputer type architecture control circuitry. A five-bit binary
address word is provided for addressing a 15-bit binary word from a
non-volatile memory matrix. The 15-bit binary word comprises 14 bits
corresponding to a tune word for the channel selected and a 15th MSB as a
skip toggle indicator. The 20 bits are stored in three shift registers
in the data in/out circuit in a 5-bit address buffer, a 1-bit skip
toggle buffer, and a 14-bit data buffer register. The 14-bit tune word
is placed in a data latch comparator for the PWM generator. An analog
circuit provides the voltage conversion of the digital output of the PWM
generator proportional to the tune word for applying to the varactor
tuner of the TV at a selected frequency.
The binary tune word is incremented or decremented to provide an updated tune word in tuning the system by means of a microcomputer approach. The binary tune word is written and read from the non-volatile memory by the same microcomputer system.
The 14-bit binary tune word is updated either by external user control or AFC tuning. In either mode of operation, the tune word is incremented or decremented within a minimum and maximum binary tune word that is stored in a ROM memory matrix. In addition, increment values and tuning time limits are also stored in the ROM memory matrix. An arithmetic logic unit comprising a temporary storage RAM file, two 14-bit working registers, and a 1-bit full adder provide the means for perf
orming the system's computations.
An 8-bit program counter provides the binary address of instructions in the 8 × 256 instruction ROM which addresses the PLA decode providing for an instruction generator. The PLA decode provides 26 "and" functions and 12 "or" functions. In addition, a 12 to 1 input logic status switch provides the necessary status indication for the 12 external controls. These input signals are detected by a 1-bit status latch.
The system is partitioned into two major functions: the non-volatile memory and the digital to analog converter and control circuits. The channel addressing and varactor diode band selection is generated with a rotary switch assembly. While a rotary switch assembly was used to implement the embodiment, non-volatile memory designs have been generated for addressing and band selection and could be easily implemented. The tune voltage interface between the digital to analog converter and the varactor diodes use standard oscillator and amplifier buffer circuits to provide the AFC summing and UHF tuning functions.
BRIEF DESCRIPTION OF THE DRAWINGS
The novel features believed characteristic of the invention are set forth in the appended claims. The invention itself, however, as well as further objects and advantages thereof, will best be understood by reference to the following detailed description of an illustrated embodiment taken in conjunction with the accompanying drawings, in which:
FIG. 1 is a functional block diagram employed to illustrate the present invention in a TV receiver.
FIGS. 2, 2A-2B are detailed circuit diagrams of the input buffer registers in the data in/out circuit.
FIGS. 3, 3A-3B are detailed circuit diagrams of the ROM constant file and its addressing circuitry.
FIG. 4 is a detailed circuit diagram of the automatic channel shift encode.
FIGS. 5, 5A-5D are detailed circuit diagrams of the instruction ROM, program counter, and microprogram counter.
FIGS. 6, 6A-6D are detailed circuit diagrams of the instruction PLA.
FIGS. 7, 7A-7B are detailed circuit diagrams of the input logic status switch.
FIGS. 8, 8A-8D are detailed circuit diagrams of the arithmetic logic unit.
FIGS. 9, 9A-9B are detailed circuit diagrams of the PWN generator.
FIGS. 10, 10A-10B are detailed circuit diagrams of the analog circuitry.
FIGS. 11A-11H are detailed architecture diagrams of the microcomputer system.
FIG. 12 represents the tune voltage amplifier diagram and related equations for calculating binary words corresponding to tune voltages.
FIGS. 13, 13A-13L are detailed drawings of the instruction set algorithm for the non-volatile stationary memory tuning system.
DETAILED DESCRIPTION
A more complete understanding of the detailed embodiment will be understood by a brief description of the requirements of the system. The fine tune up or down is accomplished by a rocker switch with center off position. A closed position on the switch will increment the tune voltage at the rate of 2 to 8 steps per second. The fine tune control is operative on VHF and UHF tuning modes.
UHF programming is accomplished by pushing a potentiometer control knob and turning the knob pointer to the desired chan
nel number. When the knob is pushed, a
contact is switched to ground. The knob is spring loaded in the out
position and cannot be turned unless pushed in. The UHF programming
potentiometer has approximately 30 turns. The user is able to fine tune a
UHF station with this potentiometer and also with a fine tune rocker
switch. The UHF fine tune limit is said to be plus or minus 128 steps
from the binary word stored in the non-volatile memory RAM matrix only
when the fine tune rocker switch is used. If the user continues to hold
the rocker switch in the same mode after 128 steps, the tune voltage
reverses direction and increments in the other direction for 256 steps
until it hits the other limit where it reverses direction again.
Storage and memory requires approximately 240 milliseconds. The binary tune voltage word and skip signal is stored when the set is turned off. If any tuning control for the channel skip button has been engaged while addressing the channel, the tune voltage and skip will also be stored in the memory when a channel change occurs.
An interchannel AFC defeat pulse occurs between each adjacent channel position. The pulse occurs when a switch contact is momentarily shorted to ground. The duty cycle of the pulse is approximately constant versus the rate of rotation of the channel select knob. The duty cycle is about 25% contact closed and 75% contact open. The binary input address is sampled and latched at the end of a write time or 48-68 milliseconds after receipt of the last interchannel pulse, whichever occurs last. A user programmable skip channel signal output is utilized. The operator uses a pushbutton to change the state of the signal.
The system has been designed for a 20 channel capacity. This includes 12 dedicated VHF channels plus 8 undedicated UHF channels. In VHF mode, a ROM plus non-volatile RAM approach is used to limit fine tuning. The ROM plus RAM make up a 14-bit tuning word plus a 1-bit skip flag. The RAM is 8-bits tuning word plus skip flag. The system is designed such that the LSB of the 8-bit tuning word can be reprogrammed for each VHF channel to occur anywhere from the LSB position to the 7th bit of the 14-bit tuning word. In the UHF mode the RAM shall be 14-bits for the tuning word plus 1 bit for skip flag.
Referring
now to the block flow diagra
m of FIG. 1, the TV tuning microcomputer approach flow diagram is indicated. The television receiver 2 has a selector switch 26 for generating an address for the non-volatile memory matrix contained in the microprocessor circuitry 4. A more detailed block diagram of the non-volatile memory architecture and address architecture is indicated in FIG. 11A. In one embodiment the non-volatile memory comprises a DIFMOS memory matrix (dual injection floating gate metal oxide semiconductor). Data retention without power is achieved by storing charge on an array of floating gates. Any floating gate in the memory array can be charged or discharged by the injection of electrons or holes from an avalanche plasma formed in two special injector structures within each bit. Once a floating gate has been charged, it will stay charged almost forever, unless it is intentionally discharged by reprogramming. The decay rate of a charge from a floating gate has been measured at less than 1% of the initial value per decade of time at 85° C. In the embodiment described the Texas Instruments X-929A decoded 32 bit non-volatile RAM semiconductor memory is used. However, other non-volatile memories may additionally be used in the present invention.
Digital tune words corresponding to the
UHF and VHF channels are read from the memory and written into the
memory by way of the data in/out circuitry. The data in/out circuitry
contains temporary storage registers for the 5 bit channel address, the 1
bit skip toggle indicator, and the 14 bit tune word. The tune word is
loaded into the PWM comparator where a PWM counter and PWM generator
produce digital output signals proportional to the binary tune word.
These digital output signals are fed to an analog circuit comprising an
op-amp for the conversion to the analog voltage required to be applied
to the varactor tuner of the television for tuning at the selected
channel.
The channel shift encode is provided to normalize the bit weighting of the increment value for selected VHF channels. The normalized binary word is applied to the microprogram counter to provide shift controls to the various shift registers of the tuning circuitry in the VHF mode.
Input commands by the user is read into the system by means of the input logic and status latch. This provides a means of detecting a change of state on the input switches during a tuning function so that the system may be changed to the latest input command. The change of state is detected by a status latch which loads a new address of the instruction ROM into the program counter.
The program counter provides any one of 256 instruction addresses of the instruction ROM. The instruction ROM addresses the constant memory matrix which contains the upper and lower limits for the VHF and UHF channels, increment values for both VHF and UHF tuning, time increments, write time, and maximum times. In addition, the instruction ROM addresses the instruction PLA which contains decoding for 26 "and" functions and 12 "or" functions.
The ROM constant memory matrix transfers the data to the arithmetic logic unit which contains 2 working registers, a 1 bit full adder and a RAM temporary storage file. The arithmetic logic unit provides for the operation of incrementing and decrementing tune words, providing for write times, and time out functions. The new binary tune word from the arithmetic logic unit is loaded into the data in/out circuitry or read from it. In all aspects of the operation of the present invention, the binary tune word corresponding to the individually selected channel in both the VHF and UHF mode are stored in the non-volatile RAM memory matrix for addressing upon channel selection.
Referring now to FIGS. 2A-2B the data in/out circuitry comprising the input buffer registers is indicated in greater detail. A 5 bit address buffer serial register 230 is provided in addition to 2 D flip flops 232 and 254. A 3 to 1 encode 236 is provided for transmitting of data to the 14 bit input data buffer serial register 234A-234B. Data stored in the input data buffer is parallel loaded into the 14 bit data latch serial register 238A-238B the output of which is parallel loaded into a 14 bit pulse width modulated logic latch serial register. The D flip flop 232 provides as a 1 bit skip toggle buffer for the MSB of the tune word.
A more detailed circuit diagram of the address decode and ROM
constant file is indicated in FIGS. 3A-3B. Five bits from the address generator and 4 bits from the instruction ROM are decoded to address the 32 by 14 bit ROM constant file 264A-264B. The output of the ROM constant file is loaded into a 14 bit B working register.
The automatic channel shift encode for
normalization in VHF tuning is indicated in greater detail by the
circuit diagram in FIG. 4. The 4 LSB's of output is applied to an encode
of the microprogram counter. Two serial shift registers 100 and 102 are
provided for transfer of data in the decode operation.
The instruction ROM, program counter, and microprogram counter circuitry are indicated in greater detail in FIGS. 5A-5D. The 8 by 256 bit instruction ROM 286A-286B is addressed by the 8 bit program counter 290A-290B. The 8 bit program counter is divided into two serial registers comprising 4 MSB's and 4 LSB's. The LSB's are loaded directly from the 8 bit instruction program word from the instruction ROM. The 4 MSB's are loaded into the program counter by means of the 4 bit page latch 294. In addition, 6 bits of the instruction program word are applied to a PLA decode and 4 LSB's of the instruction program word are applied to a 9 by 32 address decode of a ROM constant file. The 8 to 4 encode 302A and 302B is addressed by 4 LSB's from the 8 bit instruction word and 4 bits from an automatic channel shift encode. These 8 bits are encoded to 4 bits which addresses the 4 bit microprogram counter 400. Also, the 4 LSB's from the instruction ROM addresses a 4 to 12 decode for an input logic status switch. Two of the 4 LSB's addresses a 2 to 4 decode of a temporary storage RAM file in the arithmetic logic unit.
FIGS. 6A-6B is a more detailed circuit diagram of the instruction PLA. Six bits of address from the instruction ROM are used to address the 6 by 28 by 12 bit PLA decode. The output of the PLA comprise 26 "and" functions and 12 "or" functions.
FIGS. 7A-7B is
a more detailed circuit diagram of the input logic status switch. The
12 inputs to the status switch are read by decoding 4 LSB's of
instruction word from an instruction ROM. An indication of a match
between the decode and the 1 of 12 inputs is indicated by the setting of
a status latch 282. This status latch is loaded to the one state in the
presence of any of the 12 input functions and a matching code.
FIGS.
8A-8D are a more detailed circuit diagram of the arithmetic logic unit
and temporary storage RAM file. The 14 bit word from a ROM constant file
is parallel loaded into the 14 bit B working serial register 274A-274B.
A 4 by 14 bit temporary storage RAM file 276A-276H is provided for
temporary storage of the data from the ROM constant file and working
registers. The temporary storage RAM file has four memory locations that
are selected by the 4 to 1 decode 308. Access to working register B is
by means of a 2 to 1 encode 304 and access to the 14 bit A working shift
register 266A-266B is by means of the 4 to 1 encode 270. The temporary
storage RAM file is accessed by means of the 3 to 1 encode 278. A 1 bit
full adder 288 is provided for addition and subtraction of the A and B
working registers. Two LSB's of instruction word are used to address the
temporary storage RAM file.
FIGS. 9A-9B is a more detailed circuit diagram of the pulse width modulator (PWM) generator. A 214
PWM counter 250A-250B is provided. The binary word output is parallel
loaded into a 14 bit PWM logic latch. When the 14 bit binary word from
the PWM counter matches the 14 bit tune word stored in the 14 bit data
latch the PWM logic latch is tripped and the PWM digital output is
generated.
FIGS. 10A-10B are a more detailed circuit diagram of the analog circuit for converting the digital output of the PWM generator of an analog voltage to be applied to the varactor tuner of the television. In addition, circuits for PWM power up clear, AFC defeat, interchannel pulse, and UHF up/down circuitry are provided.
Referring now to the system diagram of FIGS. 11A-11H, the TV tuning
microprocessor architecture is indicated in greater detail than the
block diagram of FIG. 1. The 5 bit binary channel address is read off
the 20 position selector switch 202 by means of the address generator
204 in FIG. 11A. The binary address corresponds to any one of 20
channels, 12 of which are VHF channels and 8 of which are UHF channels.
In addition to the channel addressing the selector switch has means for
channel interrupt selection 224, means to select the varactor band of
the TV tuner 226, and means to program AFC bias on and off 228. The
channel address is read directly into the 5 bit address latch 206 in the
non-volatile RAM circuitry. Information in the 5 bit address latch 206
is used to address the 32 bit addressable non-volatile RAM matrix and
also provides a parallel input into a 5 bit address shift register 208.
The 5 bit address on a multibus line from the selector switch is used to
address one of the 20 locations in the non-volatile memory circuitry
used to retain the binary tune word. Provided in the memory circuitry
are 12 VHF binary tune words and 8 UHF binary tune words.
In series with the shift register 208 is a 15 bit data out shift register 210. These two shift registers 208 and 210 are in a read mode when not programmed to shift out. Therefore they are always looking at and reading the address latch 206 and the 15 bits of the memory matrix 212. Fourteen bits of the non-volatile RAM matrix are used for representing the binary tune word and the 15th MSB is used for a skip toggle indicator. The 20 bits comprising 5 from the address register and 15 bits from the data out register are serially shifted out when we read the non-volatile memory 212. As the bits are serially shifted out they are also fed back into the stack in a serial manner by loop 222 so that the 5 bit address and the 15 bit data tune word are restored into the registers.
The address and data tune word as they are shifted out of the registers into the control chip are fed into a 20 bit input data buffer comprising a 5 bit address buffer 230, a 1 bit skip toggle buffer 232, and a 14 bit input data buffer register 234 indicated
in
FIG. 11B. The address buffer register 230 contains the last bits shifted
out of the non-volatile memory block which comprises the 5 address
bits. The 6th MSB is the skip toggle bit and resides in the skip toggle
buffer register 232 immediately following the address buffer. The 14 bit
data tune word is steered through a selector switch encode 236 into the
14 bit input data buffer register 234. The selector switch encode 236
has 3 select states comprising load input data buffer (LIDB), read
non-volatile memory (RNVM), and read input data buffer (RIDB). The 14
bit tune word is loaded into the data buffer register 234 by selecting
the read non-volatile memory mode of the selector switch encode 236.
The binary tune word in data buffer register 234 is loaded parallel into the 14 bit PWM logic latch 248 when there is a load PWM (LPWM) signal on the 14 bit data latch 238. The 14 bit tune word in the PWM logic latch 248 is used as a compare word for the 14 bit pulse width modulator counter 250. The pulse width modulator operates with a 1 MHz input clock from the PWM buffer and oscillator 252 that is fed into the 214 PWM counter 250 and runs continuously.
The PWM counter 250 counts from binary 0 in a binary manner until it reaches one of two conditions. First, if the binary word of the counter 250 compares with the 14 bit tune word in the PWM logic latch 248 then
the PWM logic latch which is performing a magnitude compare will provide
an output signal and trip a flipflop which will then remain in that
state until the counter completes its count-out cycle. The second
condition is when the PWM logic latch 248 is at an all 1 state whereby
the PWM counter would count up to an all 1 state that also corresponds
to the runover point of the counter. Therefore, the PWM counter will
always count up to 214 and then run over where 214 and a 1 MHz input corresponds to a writeout at 16 milliseconds.
In the PWM generator we therefore have a magnitude compare of the PWM counter with the 14 bit tune word stored in the 14 bit PWM logic latch 248 and when the first time there is a match of the counter and the binary magnitude we receive an output signal from the PWM logic latch 248 proportional to the tune word. To tune the television we alter the pulse width modulated signal from the PWM logic latch 248. We alter the pulse width modulated signal by changing the bit value of the binary tune word contained in the PWM logic latch thereby giving us a modulated pulse width at a duty cycle of 16 milliseconds.
The skip toggle bit in the skip toggle buffer register 232 may be altered by means of the skip toggle inputs through the MAND gate 256. In the program algorithm when the skip toggle is altered we read the information out and write it into memory once the function is complete. Altering of the skip toggle information is achieved by first reading the state of the skip toggle buffer 232 which contains an MSB that was read out of memory, loading that bit into a D register 254, and changing that information if we have a program input to change the state of the skip toggle. A skip toggle output 258 is provided to give an indication that the skip toggle has been altered and the present program condition of the skip toggle. The skip toggle is not applicable to a mechanical rotary type selector switch system as indicated in this embodiment whereas the selector switch 202 is of a rotary type. However, by replacing the rotary selector switch with an electronically addressable circuit as disclosed in U.S. Pat. No. 3,968,443 issued on July 16, 1976, assigned to Texas Instruments Incorporated, the same assignee of the present patent application, then a skip function would be applicable in the present tuning circuitry.
After loading the address buffer 230 with the 5 bits of address from the address generator 204 these 5 address bits are transferred in a parallel mode to the 9 by 32 address decode 260 and the 5 to 4
automatic channel shift encode (VHF only) 262 indicated in FIG. 11C. The automatic channel shift encode is used to determine whether the system is functioning in the UHF or VHF mode. If the system is functioning in the VHF mode the automatic channel shift encode provides one of four possible codes for incrementing the VHF tune word. The four codes corresponding to the particular incrementing bit value that applies to the VHF channel that has been selected by the address generator 204. Since there are only four increment rate values and 12 VHF tune words, the encode 262 selects depending upon which channel the system is on one of the four incrementing rate values to be applied to the given tune word.
The 5 bit address from the address buffer 230 is also parallel applied to the 9 by 32 address
decoder 260 to select a 14 bit data word stored in the ROM constant file
264. The 5 bit address which determines the VHF or UHF channel is
decoded by the 9 by 32 address decoder into a 32 bit address word to
address the 32 by 14 ROM constant file. The four LSB's of the
instruction code determines which of the 32 words we are addressing.
These 32 fourteen bit words in the ROM constant file comprise upper and
lower limits for the VHF channels, UHF channel limits, increment values
for both VHF and UHF tuning, time increments, maximum times, and write
time.
When we have read a tune word into the input data buffer 234 and want to perform a tuning function upon it, we transfer the 14 bits of data out of the input data buffer register and into the 14 bit A working register 266 by means of a read input data buffer (RIBD) command at the 4 to 1 encode switch 270. Also, the 14 bit word is serially transferred back into itself by means of loop 272. After loading register A with the 14 bit tune word, the tune limit and increment value is outputted from the 14 bit ROM constant file and loaded into the 14 bit B working register 274. These values are now loaded into the temporary storage RAM file 276 by selection of the LBMX command on the selector switch encode 278. The temporary storage file comprises a 4 by 14 bit RAM file. Tuning is now performed by adding an increment value which is stored in register B to the 14 bit tune word stored in register A if the system is in a tuned upmode and subtracting them if the system is in a tuned downmode.
The incremented or decremented tune word is restored into the A working register by means of the "A" normalize command on the selector switch encode 270 indicated in FIG. 11D.
After the restore operation the updated 14 bit tune word is transferred into the input data buffer 234 by performing a load input data buffer (LIDB) command on selector switch encode 236. The updated tune word is now stored into the input data buffer and also restored into register A. The updated tune word is now loaded into the 14 bit PWM logic latch 248 whereby the PWM counter 250 can compare its out to updated tune word.
Whenever a tuning function is performed the system goes through a sequence whereby it performs an addition and a time out routine in the arithmetic logic unit by decrementing our timing word until a negative number is reached. In each case information is read from the ROM constant file and stored into the temporary storage RAM file. This information is a function of the particular channel and whether the channel is a UHF or VHF channel. In the sequence the system always goes through reading the input switches so if there is a change of state on our input switches during a tuning function it will be detected and the system function will be changed to the latest input command.
These input control functions are read into the system by means of the 12 to 1 input logic status switch 280 having 12 inputs indicated in FIG. 11F. A 61 kilohertz slow clock is provided to perform the write function which in the case of the non-volatile memory comprising DIFMOS memory cells takes in the order of 100 milliseconds to write a 0 into the memory, therefore requiring a clock running at a slower rate then the control or processing clock that is normally used. The slow clock is also used to provide dampening when in the power up mode or after we have already completed a write command in writing into memory so that the system doesn't read the new word while it is still settling.
Another input is the UHF/VHF control line that is a function of the particular address that has been detected from our selector switch 202. A third and fourth input is an AFC high and an AFC low select. The function of the AFC high/low is to provide a digital AFC control function. The means of achieving the digital AFC control is not indicated in the figures or represented in the algorithm. However, the digital AFC control system could be incorporated into the architecture by means of a couple of comparator windows and the appropriate addition of control logic to the present algorithm.
A fifth input is a UHF up/down control that is a control from a comparator 282 that determines whether the tune voltage is above or below the corresponding potentiometer setting of the UHF channel coarse tune potentiometer 284. An additional input is a power on/off select. Upon a power down input the 14 bit tune word stored in the input data buffer register 234 is written into the addressable non-volatile memory.
The seventh input is a skip toggle input which is not incorporated into the present system. This skip function if made available would allow for the skipping over of selected channels but is not applicable to a mechanical rotary switch as noted above.
The eighth and ninth inputs comprise the rocker arm fine tuneup and fine tunedown for the control voltage. The UHF tune on/off control places the tuning function into a coarse UHF tuning mode. The AFC on/off switch is used to activate the internal AFC tuning function or to allow for the external manual tuning mode. The final switch on the input logic status switch is the interchannel pulse that is inputted from the selector switch 202 by means of the channel interrupt line 224. The interchannel pulse provides
an indication that the selector switch is in between channels in a
changing mode and also detects the completed change.
The twelve inputs are read into the input logic status switch. If one of the twelve logic status switches is activated it is compared with a particular select code and if there is any indication of a match on the read command of that given instruction to the particular switch being closed or opened as the case may be, the status latch flip-flop 282 is set. The status switch inputs are decoded by the 4 to 12 decoder 284 which is addressed by four LSB's of instruction from the instruction ROM 286. The status latch 282 provides an indication that the system has received an input corresponding to one that has been coded in the instruction table of the decoder 284.
The second input to the status latch 282 is the carry input from the one bit full adder when the system is in a subtract routine and if the subtract routine results in a negative number. The negative number indication is used to perform compare tests to determine whether an upper or lower tuning limit or timing limit has been reached. The setting of the status latch 282 provides an input to the instruction ROM 286 to load the program counter with a new page of instruction address.
The eight bit program counter 290 indicated in FIG. 11C receives its count clock input from the 250 kilohertz clock 292 which is a one quarter division of the one megahertz clock from the PWM counter 250. The program counter gives any one of 256 instruction addresses for the instruction ROM 286. The location of the program counter in its counting sequence may be altered by loading in a new eight bit word into the program counter. The four LSB's from the instruction ROM are parallel loaded into the four LSB positions of the eight bit program counter and parallel loaded into a four bit page batch 294. If the status latch is set by a subtract operation from reading an input from the logic status switch, then upon a load page command (LPD) applied to the NAND gate 296 the four LSB bits of address with be loaded from the page latch into the program counter in the MSB position.
The output of the instruction ROM 286 feeds into the instruction PLA circuitry 298 which outputs 26
"and" functions and 12 "or"
functions indicated in FIG. 11E. The instruction PLA decode comprises
the 6 by 28 by 12 bit memory. These "and" and "or" functions correspond
to the instruction set that is used to program the system.
The four bit microprogram counter 300 is used to provide shift controls to the various shift registers of the tuning circuitry. And more particular, the microprogram counter allows for the shifting of the 14 bit data word in working register A into the input data buffer register. In addition it allows for the addition and subtraction of working registers A and B and also allows for the transfer of data to the non-volatile memory.
The maximum number of serial shifting by the microprogram counter is 14 bits. When the shifting produced by the microprogram counter is completed, the system operation is returned to the eight bit program counter where it is indexed to the next address in the program. The eight bit microprogram instruction is selected by the microprogram address select encode 302. Four bits from the automatic channel shift encode 262 and four LSB's from the instruction ROM are loaded parallel into the address select encode to provide four bits of instruction address for the microprogram counter 300.
Referring to FIG. 11D a switch encode 304 is provided to allow for a restore operation whereby the 14 bit word in the B working register is shifted back into itself. In addition the switch encode provides for a shifting of the 14 bit word from the temporary storage RAM file 276 into the working register. Switch encode 270 allows for the shifting of a 14 bit word into the A working register from the temporary storage RAM file, the input data buffer register 234, a sum product from the addition of working register A and register B by means of the one bit full adder 288, and finally the restore of the word in the A register into itself.
The temporary storage RAM file 276 is addressed by two bits from the instruction ROM through a 2 to 4 encode 306. The four bit word from the encode is used to select one of four 14 bit storage files in the RAM file 276 by means of the 4 to 1 selector encode 308.
The pulse width modulated output 310 from the PWM logic latch is fed into the PWM buffer 252.
The PWM signal from the PWM buffer is fed into a driver buffer 312 that is referenced to +5 volts in FIG. 11H. The PWM output continues through a three stage PWM filter to provide the IC filtering required for the resolution and ripple voltage needed for a pulse width modulated signal of the longest duration to an acceptable level in the UHF mode. The VHF mode would not need as much filtering to generate a PWM at an acceptable ripple level. However, at least three stages are required for UHF filtering.
The output of the three stage filter is a DC voltage that is proportional to the pulse width modulated signal, the pulse width modulated signal being proportional to the 14 bit tune word that has been loaded into the 14 bit input data buffer register and PWM logic latch. The tune voltage is amplified by inverting voltage amplifier 316 and subsequently filtered by an additional single stage filter 318. The final DC analog tune voltage is passed to the television varactor tuner for tuning to the selected channel.
A second comparator 282 comprises a UHF up/down comparator which receives its inputs from the three stage PWM filter and a UHF course tune potentiometer 284. The potentiometer is referenced to the same +5 volts as the driver buffer 212. The comparator 282 provides an indication as to whether or not the system is in the coarse tune mode of UHF, whether or not the system is above or below the desired tune voltage for the particular channel setting, and provides a coarse tuning signal for the controller.
FIG. 320 represents the power supply required for the operation of the tuning system. The +5 volts used to provide the upper voltage for the tuning amplifier for the varactor tune voltage output. The +17 volts is used for biasing of the MOS circuitry of the
non-volatile memory. The +10 volts is used for biasing the CMOS logic in
the system. The +5 volts is used for the TTL and I2 L logic
in the system. Finally, the 0 to -35 switch voltage is used for
programming the non-volatile memory when the system is in a write mode.
In performing a tuning function using the microcomputer approach in the VHF mode a binary tune word that is stored in the input data buffer register is incremented or decremented within the limits for the minimum and maximum tune voltages for the selected channel that is stored in the ROM constant file. The ROM constant file contains a binary word for the maximum tune voltage and minimum tune voltage for each of the 12 VHF channels. These limits establish the range of tuning permitted by the system. These values are individually selected for each of the VHF channels. In a similar manner minimum and maximum limits are established for the UHF channel. However, due to the large number of UHF channels the minimum and maximum limit are established so as to encompass all 72 UHF channels with tuning for the selected UHF channel falling therebetween.
Referring now to FIG. 12 the schematic diagram used for calculating the minimum and maximum tune voltages is indicated in addition to the equations used. Equation 3 is the input voltage as a function of the output tune voltage. Given the desired tune voltage EO the input voltage Ei may be calculated. In addition, by using equation 4 the bits corresponding to the input voltage is calculated thereby resulting in the binary tune word corresponding to the calculated input voltage.
In this regard, Table I indicates the VHF ROM constants for the minimum limits as established by equations 3 and 4. Each of the VHF channels have a unique binary word corresponding to the minimum voltage limit. In a similar manner Table II indicates the VHF ROM constant for the maximum tune voltage. As noted the nominal tune voltage for tuning the television will lie somewhere between these two established limits. The binary words comprise 14 data bits and are addressed by the 5 bit binary address from the selector switch.
The data including the VHF minimum and maximum limits are stored in the ROM constant file as indicated in Table III. As noted the ROM constant file has 32 separate data values stored therein. The VHF and UHF increment values are also stored in the ROM constant file. The maximum time for both VHF tuning and UHF tuning are also stored therein. In addition, the time increment value is also stored. Finally, the UHF minimum tune word and the UHF maximum tune word including the write time is stored in the ROM constant file.
Table IV indicates the PLA logic for automatic right shift addressing (VHF onl
y) of the microprogram counter. As noted from Table III the VHF
increment value has a 1 in the 7th bit position. During the incrementing
or decrementing of the VHF word it is desired to increment or decrement
at a particular bit weight value unique to each of the VHF channels. To
accomplish this, the automatic channel shift encode provides for right
shifting of the increments value so as to normalize it to provide a
different bit weight for each of the 12 UHF channels. The number of
right shift in the VHF mode for each of the selected channels is
indicated in Table IV in addition to the encode word for the
microprogram counter preset. Since the UHF tuning is performed by a
process which provides for the increasing of the bit weight of the
increment value, the normalization by right shifting the increment value
is not needed.
The instructional logic from the PLA decode is indicated in Tables V and
VI. In Table V the instruction ROM decode outputs comprising 12 NOR gate
outputs is indicated. These 12 outputs provide the "OR" logic functions
for the microcomputer program. Table VI indicates the 28 instruction
ROM decode outputs of the PLA decode. These outputs comprise 28 "AND"
logic functions for the microcomputer programming.
TABLE V
INSTRUCTION
ROM DECODE OUTPUTS
(NOR GATE OUTPUTS)
1. lpc = ubrn + brn s/l
2. μpc enable = rnvm + lnvm + rsax + rsbx + add + suba + subb + rmxa + rmxb + lamx + lbmx + nora + norb + resa + resb + ridb + lidb + wro + wri + 27 bit (of p.c.)
3. ld μpc = rnvm + lnvm + rsax + rsbx + nora + norb + resa + resb
4. data in sel idb = shift cont. in code = rnvm + lnvm
5. shift cont. idb = ridb + rnvm + lnvm + lidb
6. shift cont. ram = rmxa + rmxb + lamx + lbmx
7. ram data restore sel = rmxa + rmxb
8. shift cont. reg a = rmxa + lamx + rsax + add + suba + subb + nora + resa
9. reg a sel restore a = resa + lamx + lidb
10. reg a sel Σ = add + suba + subb
11. shift cont. reg b = rmxb + lbmx + rsbx + add + suba + subb + norb + resb
12. reg b sel restore b = resb + lbmx
table vi
instruction
rom decode outputs
(nand gate outputs)
0. unconditional branch (ubrn)
a. if s/l = 1 or 0 (i.e. DON'T CARE)
1. parallel loads program counter on clk with contents of page latch and 4 lsb's of ubrn code.
2. clears s/l on clk
1. branch (brn)
a. if s/l = 1
1. parallel loads program counter on clk with contents of page latch and 4 lsb's of brn code.
2. clears s/l on clk
b. if s/l = 0
1. do nothing
2. load page (ldp)
a. load 4 bit address code into page latch (4 msb's of address).
3. read rom (rrom)
a. parallel loads reg. b with contents of rom stored at location defined by 4 bit address code and/or channel select code (if vhf).
4. read inputs (rin)
a. enables input defined by 4 bit address to be gates thru to the s/l flip/flop. if input is "0" then s/l is loaded with a "1" on clk. if input is a "1" then s/l is loaded with a "0" on clk.
5. read channel code sw. (rccs)
a. sets input strobe to a "1" level so that the channel select switch can be parallel loaded into the nvm latch buffer on the memory ic.
6. load pwm (lpwm)
a. parallel loads the contents of the input data buffer register into the pwm data register during clk.
7. sense nvm (snvm)
a. sets sense line to "0" so that the contents of the nvm can be parallel loaded into the data buffer registers on the memory ic during clk.
***the following functions enable the μ program counter***
8. read nvm buffer (rnvm)
a. selects 4 bit address code to be loaded into μ program counter.
b. loads 4 bit address (0101) into μ program counter to reset it for 10 right shift functions. load occurs during clk.
c. on clk the program counter is disabled, and the μ program counter is enabled.
d. a right shift command is provided for the input buffer registers and the nvm buffer registers until the μ program counter reaches the 1111 state (10 shifts).
e. when the μpc is 1111 then on the next clock pulse (which sets the μpc to 0000) the clk input to the μpc is disabled, and the clk input to the program counter is restored.
f. note: this command sets the data select line to the memory ic to a logic "1" level, so that data can be sequenced out of the ic into the dac.
9. load nvm buffer (lnvm)
a. same as read nvm buffer except sequence (f) is: note: this command sets the data select line to the memory ic to a logic "0" level, so data can be sequenced into the memory ic from the dac ic.
10. right shift a (r.s.a. x)
11. right shift b (r.s.b. x)
a. selects 4 bit variable address code to be loaded into μ program counter.
b. loads μ program counter during clk.
c. disables program counter on clk.
d. enables μ program counter on clk.
e. enables data shift in (a) or (b) register. data in register (a) or (b) is with leading zero's during μ program count time then right shifted according to the following shift code.
f. when μpc is 1111 THEN ON NEXT CLK PULSE THE μPC CLK INPUT IS DISABLED AND THE PC CLK IS ENABLED.
12-1 add (a & b) (add)
a. program counter is disabled on clk.
b. μpc is enabled on clk.
c. shift controls to reg. a and reg. b are enabled.
d. reg. b restore sel. is enabled.
e. reg a Σ input select is enabled.
f. when μpc is 1111 THE μPC CLK IS DISABLED AND THE PC IS ENABLED.
12-2,3 subtract (b-a) (suba) subtract (a-b) (subb)
a. enables inverter input to adder (e) from reg. a or reg. b.
b. sets carry bit in e1 to "1".
c. pc is disabled on clk.
d. μpc is enabled on clk.
e. reg a and reg b shift control is enabled.
f. data is shifted serially from reg a and reg b into Σ.
g. data in reg b is restored into reg b without change.
h. Σ data out is stored in reg a.
i. when μpc is 1111 THEN PC IS ENABLED AND μPC IS DISABLED.
13-1 read ram ➝ a (rmxa)
read ram ➝ b (rmxb)
a. address bits (2 bits) select ram storage location.
b. control enables ram read storage gate.
c. control enabled ram ➝ a or ram ➝ b select.
d. pc is disabled on clk.
e. μpc is enables on clk.
f. ram & reg a or reg b shift gates are enabled.
g. data is shifted from ram to reg a or b until μpc is 1111 then μpc clk is disabled and pc clk is enabled.
13-3 load a ➝ ram (lamx) 1,2,3,4
load b ➝ ram (lbmx) 1,2,3,4
a. program counter is disabled on clk.
b. μpc is enabled on clk.
c. address bits (2 bits) select ram storage location.
d. shift controls for selected memory location are enabled.
e. reg a ➝ m sel. and REG A DATA RESTORE.
14-1 normalize a (nora)
14-2 normalize b (norb)
a. selects 4 bit channel encode address to be loaded into μpc (normalized code).
b. loads 4 bit channel encode address into μpc during clk.
c. pc is disabled on clk.
d. μpc is enabled on clk.
e. control enable shift gates of reg. a or b.
f. control sets reg. a and reg. b inputs (serial) to "0".
g. data is shifted in reg. a or b until μpc is 1111 then μpc clk is disabled & pc clk is enabled.
14-3 unused code
14-4 slow clock enable (sloc) switches the clock input to the μpc from t1 clock line to the slow clk line (16ms PERIOD).
15-1 read input data buffer (ridb)
a. enables buffer data select into reg a.
b. enables input buffer data restore select gate into data buffer.
c. enables input data buffer and reg. a data shift control.
d. pc is disabled on clk.
e. μpc is enabled on clk.
f. data is shifted from data buffer into reg. a until μpc is 1111, μpc is disabled and pc is enabled.
15-2 load input data buffer (lidb)
a. enables reg. a data select gate into data buffer reg.
b. enables restore select gate into reg. a.
c. control enables reg. a and INPUT DATA BUFFER SHIFT GATE.
D. pc is disabled on clk.
e. μpc is enabled on clk.
f. data is shifted from reg. a to data buffer until μpc is 1111, then μpc is disabled and pc is enabled.
15-3 clear write (cwro) resets the sense line to the memory ic to a "1"; switching the memory cells from a write mode to a read mode.
15-4 write (wro) sets the sense line to "0" on clk; thereby permitting data to be written into the memory ic cells.
15-5 dummy (unused) unused code used for dummy operations.
the op-codes for the single clock instructions including their address are indicated in Table VII.
The 4 bit and 6 bit op-codes for the microprogram control instructions including their addresses are indicated in Table VII.
The input control line read codes are indicated in Table IX. The input functions each have the same 4 MSB's (0100) and differ only in the 4 LSB's.
The ROM constant address codes are indicated in Table X. It is to be noted that the 12 VHF channels are encoded to 12 minimum limits and 12 maximum limits and use the first 24 ROM addresses (00000 to 10111). The remaining 8 words are located in the last 8 ROM addresses (11000 to 11111), thus using a 32 word by 14 bit ROM structure. A greater understanding of the tuning system and the information contained in Tables I-X is gained by referring to the instructions set algorithm.
The
instruction set algorithm for the nonvolatile station memory tuning
system as indicated in FIGS. 13A-13L. The algorithm can be divided into a
series of four operating modes. The first operating mode comprises the
non-tuning mode, FIGS. 13A-13C, the second mode is the start of the AFC
off loop which comprises the tuning mode select and initialization FIGS.
13D-13F, the third mode comprises the start of the
Rocker Tune loop that is the channel fine tuning mode FIGS. 13G-13H, and the fourth loop is the UHF Pot Tune loop comprising the UHF coarse tuning mode FIGS. 13I-13L.
The tuning system is activated by a power up entry 1 in FIG. 13A followed by a load page command (LDP) where a 4 bit address code is loaded into the page latch 294 to address one of the 16 pages in the instruction ROM 286. A clear write (SWRO) operation is performed to reset the sense line to the memory IC to switch the memory cells from a write mode to a read mode. A read channel interrupt loop is performed whereby the system reads the channel interrupt switch until the channel interrupt indication is no longer present.
A channel interrupt indication 224 from the selector switch 202 is applied to the input logic status switch 280. When the input signal matches a 12 bit binary decode 284 the status latch 282 is set. The read channel interrupt loop continuously reads the status latch to determine whether or not it has been set. As long as the status latch has been set from an indication of a channel interrupt the system will loop back into the read mode and will continue until the signal in the status latch is eliminated by the completion of a channel selection at the selector switch 202. The purpose of the channel interrupt read operation is to prevent the system from reading the channel tune word when the selector switch is being changed from one channel to another.
Upon jumping out of the read channel interrupt loop a read channel code switch (RCCS) is performed whereby the five bit address from the selector switch and address generator is parallel loaded into the nonvolatile memory address latch buffer 206 of the memory IC. A slow clock enable signal provides dampening to offset any electromechanical bouncing that may occur during the switching operation. Additional dampening is provided by right shift of the B working register 274 (RSB3) where at a slow clock rate the working register is right-shifted 14 times into itself followed by an unconditional branch command (UBRN) to the next address in the instruction ROM.
The next instruction is to sense the nonvolatile memory (SNVM) where the 15 bit word stored in the memory is parallel loaded into the data out buffer register 210 during a clock pulse. At
the same time the 5 bit address from the address latch 206 is parallel
loaded into the 5 bit address register 208. Two successive 10 right
shift operations are performed by the registers 208 and 210 upon a read
nonvolatile memory buffer command (RNVM). Upon completion of the 20 bit
right shifts the 14 bit tune word is located in the 14 bit input data
buffer register 234, the 15th bit indicating the skip indication is
located in the skip toggle buffer 232, and the 5 bit select address code
is located in the address buffer 230. The load PWM command (LPWM)
parallel loads the 14 bit binary tune word from the 14 bit data latch
238 into the 14 bit PWM logic latch 248. This provides a binary word
which is proportional to the analog voltage and sets a binary compare
word for the PWM counter that is continuously counting. When the PWM
counter reaches the 14 bit binary word that matches it in the 14 bit PWM
logic latch, a signal trips the latch and sends the output to the PWM
buffer and oscillator 252.
The digital signal is converted to an analog voltage by means of the drive buffer 312, the three-stage PWM filter 314, the tune voltage amplifier 316, and the final PWM filter 318. The analog output comprising the channel tune voltage is sent to the varactor tuner of the television.
If the system power is turned off the 14 bit tune word in the input buffer data register 234 is written into the nonvolatile memory 212. After reading the on/off power switch a 4 bit page address is loaded into the page latch 294 that corresponds to the page of instruction that the system will branch to if the system detects a power off state. In the algorithm this is page 7. The power on/off indication is read into the input logic status switch 280 which if present in the status latch the system branches to the power off write routine 4 in the algorithm at address 70.
The branch statement loads a "0" into the first four bits resulting in a page 7 instruction 0 address. Two successive 10 bit shifts are required to load the 14 bit tune word, the 1 bit skip indication, and the 5 bit select address into the nonvolatile memory. Upon two successive right shift operations the 14 bit tune word and the 1 bit skip indication is loaded into the 15 bit data in register 216 and the 5 bit select address is loaded into the 5 bit shift register 218. A write 0 command (WRO) sets the voltages in the nonvolatile memory for the subsequent write operation. The nonvolatile memory will remain in a write mode until the system is commanded to change by a clear (CWRO) command. The system is programmed for the duration of time it is to remain in the right mode by
a read ROM (RROM) command. Fourteen bits of data comprising the right
time is read from the ROM constant file 264 and parallel loaded into the
14 bit B working register 274. In the next operation the 14 bit word
comprising the write time is serially loaded from the B register into
the temporary storage RAM file in the third memory file location by a
LBM3 command. This command also restores the data into the working
register. The 14 bit binary write time word is now read out of the
temporary storage RAM file into the 14 bit A working register 226 by a
RM3A command. The 14 bit binary right time word is now stored in working
registers A and B.
The instruction ROM 264 is again read by a read ROM command (RROM) whereby a 14 bit word comprising the UHF/time increment is parallel loaded into the B working register 274 from the ROM file. In the next operation the increment value stored in the B working register is subtracted from the magnitude word that is stored in the A working register. In a loop routine the increment value of the B register is subtracted from the decremented magnitude word in the A register until a test condition is reached where the word in the B register is greater than the word in the A register. This condition is detected by reading the status latch 282 as when the condition is satisfied a 1 will be detected. When the 1 is detected in the status latch the system will jump out of the loop and perform a clear write operation (CWRO) which takes the system out of the write mode after the time out operation.
The system now performs a loop routine of reading the channel interrupt and upon either a 0 or 1 indication in the status latch the system will loop back into the read channel interrupt mode. This provides a fixed loop to prevent the system from jumping to another part of the algorithm during a power down routine. When the system is powered up again the algorithm will begin at the 1 power up
entry location beginning with a load page command at address 00.
The write routine was entered into by an indication of a power off signal represented by a 1 in the status latch. If the power remains on the system will continue by a reading of the skip toggle input in the logic status switch 280. A load page (LDP) command will load a new page address into the page latch 294. If a skip toggle indication is detected a 1 state will be entered into the status latch in which it will trigger the page latch and enter the new address into the 8 bit program counter 290 that will perform a branch operation to the new page address. In the branch operation a slow clock enable is performed with a second read skip toggle and another load page. If the skip toggle indication has been removed the system will load a new page into the program counter and perform an unconditional branch (UBRN) to 6 of the algorithm at address 12. This branch operation tests the skip toggle to insure that it was not an accidental input. If the skip toggle indication is still present the system will read the skip toggle switch again and perform a looping operation until the skip toggle signal has been removed. When the skip toggle input is removed the program will jump to 3 at address 87 which is the skip toggle write routine. The write operation now performed is identical to the power off write routine at 4 address 70. The nonvolatile memory is sensed by an SNVM command followed by two 10 right shift commands in loading the nonvolatile memory (LNVM). A write command (WRO) sets the voltages for a write operation in the nonvolatile memory matrix. A 14 bit binary word
comprising the write time is read into the B working register 274 and is
then read out into the temporary storage RAM file in memory location 3.
It is then read into the 14 bit A working register 266. The ROM
constant file 264 is read again for the UHF/time increment value and is
loaded into the 14 bit B working register. In decrementing by
subtracting, a loop operation is performed until the contents of the
decremented A register is less than the stored increment value in the B
register. At this point the system jumps back to page 0 instruction 0 at
the power up entry level of the algorithm 1.
If no skip toggle input had been detected in instruction 0 F the program would perform a read channel interrupt command at instruction 12 and a load page operation to page 0. If the channel interrupt has been detected by a 1 in the status latch the algorithm will branch to 1 which is the power up entry position at the beginning of the algorithm at address 00. If no channel interrupt has been detected the system will read the AFC on/off switch at the input logic status switch 280 and branch to 5 at address 04 which comprises a read channel code switch if an AFC on/off indication has been detected. If there is no AFC on/off indication the system will branch to 7 at address 18 which is the start of the AFC loop for the tune mode select and initialization.
With the AFC switch in the off position, the television may be tuned in a manual mode. Since the system is programmed for and has memory storage for only 8 UHF channels and there are a possible 72 UHF channels in existence, the tuning minimum and maximum limits must be set so that they may be utilized with any one of the possible 72 UHF channels. To accomplish this, a UHF channel limit is read from ROM at instruction address 5B and loads the contents into the B working register 274. In the UHF mode fixed channel limits may be set up about any one of the 72 possible channels because the varactor tuning curve has a linear transfer characteristic. This allows for the setting of fixed limits around any desired channel. The tune word from the input data buffer 234 is read into the A working register 266. The UHF tune limit in the B working register is added to the tune word in the A register and the result is stored in the temporary storage RAM file 276 in memory location 1. The original tune word is again read from the input data buffer 234 and stored into the A working register. The UHF channel limit from the B working register is now subtracted from the tune word in the A working register and loaded into the temporary storage RAM file 276 in memory location 0. This sequence of operations now stores in the temporary storage RAM file a lower tune word limit and an upper tune word limit for the particular UHF channel that has been selected.
The UHF/time increment value is read from the ROM at instruction address 62 and loaded into the B working register 274. This 14 bit binary word has a 1 in the LSB position and is used for incrementing the UHF as well as for incrementing time. This incrementor value is loaded into the temporary storage RAM file 276 in memory location 2. The temporary storage RAM file now has in its memory location 0, 1, and 2 the necessary information to perform UHF tuning if necessary. The system now reads whether the selector has been set for a UHF or a VHF channel by reading the input to the input logic status switch 280. The UHF/VHF input is directed from decoding of the 5 bit address at the address decode 260. The page latch 294 is loaded with page E and after the read operation if a UHF signal is detected by a 1 in the status latch the system will continue at address EB where the UHF on/off input is read. If a UHF tuning mode is detected the system after a load page operation will branch to 9 at address 94 which is the start of the UHF pot tune loop in the UHF coarse tune mode. If the UHF is in the off position, then the system will continue at address EE and branch to instruction 22.
This loop is applicable for both VHF and UHF tuning. If at instruction 64 a VHF mode was detected, the system would branch to page 1 instruction B where the VHF increment value would be read from the ROM constant file and loaded into the B working register 274. In the VHF mode each channel has one of four possible increment values. The increment value that has been read into the B working register is normalized by a NOR B command where a right shift operation serially shifts the VHF increment value until the weighted bit value is reached for the VHF channel that has been selected. The VHF increment value is loaded from the B working register into the temporary storage ramp file
276 in memory location 2. The ROM constant file 264 is read and the VHF
maximum tune word is loaded into the B working register 274 and then
loaded into the temporary storage ramp file in memory location 1. The
ROM constant file is read again for the VHF minimum tune word and is
read into the B working register and then read into the temporary
storage RAM file in memory location 0.
The temporary storage RAM file now has in memory location 1 the VHF maximum tune word, in memory location 2 the weighted VHF increment value, and in memory location 0 the VHF minimum tune word. Each of the twelve VHF channels has a unique minimum tune value and a maximum tune value in contrast to the UHF channel limit.
The system at address 22 now operates in either the UHF or VHF mode. The increment value is read from the memory 2 location of the RAM file into the B working register 274. The tune word in the input data buffer 234 is read into an A working register 266. Before updating the tune word a series of read operations is performed. First the AFC on/off switch is read. If the AFC is at an on state, the program will jump to 2 at address 88 where a normal write routine is performed to write the tune word from the input data buffer into the nonvolatile memory. If the AFC control is in the off state, the system will read the power on/off input. If the power is off, the system will jump to 4 at address 70 for a power off write routine to again write the word in the input data buffer into the nonvolatile memory location. If the power is in the on state, the system will read skip toggle, and if a skip toggle is present will go into a skip toggle loop similar to that previously discussed. If no skip toggle is indicated, the system will read the channel interrupt input and if present will go to 11 at address 30 which is a rocker tune loop. If there is a channel interrupt, the system will go to 2 at address 88 for a normal write routine to write the tune word from the input data buffer 234 into the nonvolatile memory 212.
Address 30 is the start of the rocker tune loop for fine tuning in either the UHF or VHF mode. A read tune-up command is used to determine whether the system is in a tune-up mode or a tune-down mode. In a tune-up mode the system branches to address 4B where the contents of working registers A and B are added together comprising the tune word and the increment value with the result being stored in the input data buffer 234. The maximum tune limit is read out of the temporary storage RAM file into the B working register. A subtract operation at address 4E subtracts the updated incremented tune word from the maximum tune limits. If the resulting operation results in a positive number, the system will branch to address 3E and will load the updated tune word into the PWM logic latch 248. This address is additionally reached by
reading the tune-down indicator at address 33 and upon an indication of a
tune-down input checking the PWM tune word against the lower tune
limit. The PWM logic latch 248 will be loaded where upon subtracting the
lower tune limit from the tune word results in a positive number at
address 3D.
After loading the PWM, a timing routine is performed. This routine provides a fixed timing sequence for incrementing the tuned word. The present system is designed for eight pulses per second. However, other timing sequences may be employed; for example, 16 pulses per second or 32 pulses per second. The timing varies as a function of how fast it is desired to perform the updating of the tune word in the fine tuning mode.
The maximum time limit is read from the ROM constant file into the B working register 274 and additionally loaded into the temporary storage RAM file 276 in memory location 3. The ROM constant file is read again for the UHF/time incrementing value and loaded into the B working register. Memory location 3 containing the maximum time limit is read into the A working register 266. Subtracting the contents of the B working register from the A working register is performed in a loop routine until register A has been decremented to a negative number. At this point the system will jump to 8 at address 22 where the increment value is again read from the temporary storage RAM file into the B working register and reading the latest updated tune words from the input data buffer 234 into the A working register. The A working register now contains the latest incremented or decremented tune word. The system would also jump out of the loop during the timing cycle if a channel interrupt indication was present at address 4A where the system would jump to 2 at address 88 to perform a normal write routine of the updated tune word into the nonvolatile memory.
The program will continue through the incrementing or decrementing of the tune word. In addition in the tune-up mode at address 50 the updated tune word is compared with the upper limit and in the tune-down mode at address 3D the updated tune work is compared with the lower tune limit. At these addresses if the system has gone beyond the upper tune limit or gone beyond the lower tune limit, a branch operation will be performed to read the tune-up input at address 53 or the tune-down input at 57 depending upon whether the system has been operating in a tune-up or tune-down mode. In either case, the system will unconditionally branch
to 8 at address 22.
During the sequence of operation the tune-up or tune-down indication is read twice. The purpose of the double read operation is to change the function of the input switch. Where the system was reading up we want the system to read down and where the system was reading down before we want the system to read up. This provides for an automatic reversing of direction during the AFC/off tuning of the TV. If during the AFC/off tuning in either the up mode or down mode exceeds the upper or lower limits, the system will automatically reverse direction and tune in the other direction.
If during a tuning mode the UHF tune switch is read in the on state at address EB, the system at address ED will branch to 9 which is the beginning of the UHF pot tune loop at address 94 at the beginning of the UHF coarse tuning mode. The ROM constant file is read for the UHF/time increment value and loaded into the B working register 274 and into the temporary storage RAM file 276 in the memory location 0. The ROM constant file is read again for the maximum time value which is loaded into the B working register and into the temporary storage RAM file at memory location 3. The ROM constant file is read again for the UHF/time increment value which is loaded into the B working register and into memory location 2 of the temporary storage RAM file.
In the UHF tuning mode a different rate of tuning is programmed into the system.
The system starts off at a slow tuning rate then accelerates the tuning
rate as a function of time to allow tuning from one end of the tuning
band to the other end of the tuning band within a reasonable time yet
allow for the contingency of tuning initially at a slow rate if the
desired tune voltage is close to the starting point. The UHF/time
increment value is read from memory location 2 of the temporary storage
RAM file into the A working register and also the UHF/time increment
value is additionally read from the ROM constant file into the B working
register. These two UHF/time increment values in the A and B working
register are added together and the results stored in memory location 2
of the temporary storage RAM file. The maximum time for UHF tuning is
read from memory location 3 of the temporary storage RAM file into the B
working register. After a subtract operation of the updated UHF/time
increment value from the maximum tune time in the B working register, a
test operation at address A 1 is performed. If the maximum time value is
greater than the lapsed time, the system will read the input data
buffer register 234 which contains the tune word that is going to be
updated into the A working register. The input data buffer acts as a
temporary storage file during the tuning operation. In addition, the
UHF/time increment value is read out of memory location 0 of the
temporary storage RAM file into the B working register. The UHF/time
increment value has a 1 in the LSB position and zeros in all the other
bit positions. This is used to increment the tune word by 1 in the LSB
position. The UHF up/down control is read to determine the direction of
the UHF tuning.
The UHF up/down input is fed from a comparator 282. The output of the comparator is compared with the actual tune voltage in the system. If the system is tuning in an up mode at address 86, the system will perform an add function which will add the contents of the B working register with the A working register and load it into the input data buffer 234 which will now contain an incremented UHF tune word. The UHF maximum tune value is read from the ROM constant file into the B working register and the updated tune word in the A working register is subtracted from it to determine if the updated tuning word has exceeded the UHF tuning limit. At this point it would be desired to stop the tuning in the up mode and reverse direction. If at address BF the test condition indicates that the maximum UHF tuning limit has been reached, the system will branch to 5 at address 04 which is a non-tuning mode.
If the maximum UHF tuning limit has not been reached, the system at address C0 will load the updated UHF tune word into the PWM logic latch 248. The next operation performed is a time out for UHF tuning. The maximum time value is read from the ROM constant into the B working register and read into memory location 1 of the temporary storage RAM file. The UHF/time increment value is read from the ROM and stored in the B working register. The maximum time value is read from the memory 1 of the temporary storage RAM file into the A working register 266. The UHF/time increment value from the B working register is subtracted from the maximum time value in the A working register. A test loop routine is provided at address C5 to continue the subtract operation of the UHF/time increment value from the maximum time until it is decremented to a negative number.
During the loop operation of the time out the channel interrupt select switch is read for a positive input whereby the system would branch to 2 at address 88 which is a normal write routine. If no channel interrupt is detected, the system will continue looping until a negative value is reached during the subtract operation, and the system will branch to 14 at address E6 which is the start of the pot up loop.
In an identical routine the system will perform UHF tuning in the down mode at address A7. Here the system checks the PWM word against the minimum UHF tuning limit that has been read from ROM and stored in working register B at address A9.
A time out routine is provided at address AE identical to the time out routine performed during the uptuning in the UHF mode. At the completion of the time out for the UHF tuning in the down mode, the system will branch to 15 at address DB which is the start of the pot down loop.
At address E6 the system will read the UHF up/down switch to determine whether the system is tuning in the up mode or down mode. If the system has detected that it is tuning in a down mode, it will branch to 7 at address 18 which is the start of the AFC off loop. If the system is continuing the UHF tuning in the up mode, the system will continue by reading the AFC on/off switch and branch to 2 at address 8A for normal write routine if the AFC is in the on position. If the AFC is in the off position the system will read the power on/off switch and branch to 4 at address 70 for a power off write routine if the power has been turned off. If the power has remained on, the system will branch to 13 at address 9A which is the start of the lapse time counter.
In a similar manner at address DB for the pot down loop the system will read the UHF up/down switch and if an up tuning mode is detected, the system will branch to 7 at address 18. If the system is continuing to tune in the down mode, then the system will continue with the sequence at address DE.
On completion of this loop in branching back to address 9A a complete cycle of updating the tune word has been completed for either the UHF up tuning of UHF downtuning.
In continuing a second loop at address 9A the UHF/time increment value will be incremented by its own value to provide a new UHF/time increment value which is double the original value. This new UHF/time increment value will be added to the previously updated UHF tune word which is stored in the input data buffer 234. Prior to the addition a test condition will determine whether or not the updated UHF/time increment value has exceeded the UHF maximum time value. If the UHF maximum time value has not been reached, the system will continue updating the tune word in a closed loop routine starting at address 9A. The updated tune word will be incremented by an increasing UHF/time increment value during each loop until the maximum time value has been reached. When the UHF maximum time limit has been reached at the test operation at address A1, the system will branch to address CD. This new loop routine provides a continuous incrementing or decrementing of the UHF tune word first at a slow rate and then upon each successive loop at an increased rate by
increasing the value of the UHF/time increment value in the ROM constant
file.
Once the UHF maximum time limit has been reached, the system will change the UHF tuning rate beginning as address CD. The subsequent routine provides a high speed bit weight update of the UHF/time increment value for increasing the rate of tuning. In addition, the maximum tuning time value is also increased. The UHF/time increment value is read from memory location 0 of the temporary storage RAM file into the A working register. At address CD an RSA 14 operation is performed. This function performs a right shift operation of the A working register by 1 bit. The UHF/time increment value is read from memory location 0 of the temporary storage RAM file into the B working register and is also right shifted by 1 bit. The contents of the A and B working registers are added together, and the result stored in memory location 0 of the temporary storage RAM file. This additional operation increases the UHF/time increment value by a factor of 2. This operation now provides a high speed bit weight update by employing the increased UHF/time increment value.
The maximum time value is read from memory location 3 of the temporary storage RAM file into the A working register. Working registers A and working registers B are right shifted 14 bits with a restore operation. The content of the A and B working registers are added together and stored in memory location 3 of the temporary storage RAM file. This addition of the two working registers results in a doubling of the UHF maximum time limit. Upon completion of the doubling of the UHF/time increment value and the UHF maximum time value, the system branches back to 12 at address 98 of the program. At this point tuning will be at double the UHF/time increment value and for double the maximum tune time.
The system will continue tuning through the program by testing for an up or down tuning direction at address 86 and checking the PWM word against the maximum UHF tuning limit during an up tuning mode and checking the PWM word against the minimum UHF tuning limit in a down tuning mode. If neither limits have been exceeded, the system will load the PWM data latch with the updated tuning word and perform a time out operation followed by a branch to either the pot up loop for up tuning or pot down loop for down tuning. In either case the loop will detect a change in tuning direction and if detected branch to 7 at address 18. If the system has not received a change in direction indication, it will continue by reading the AFC on/off and power on/off controls with a branch to 13 at address 98 if neither of the controls have been activated.
At this point the system will continue the loop routine through the lapse time counter and incrementing or decrementing the updated tune word until the lapse time counter has been decremented to a negative number where the system will branch to address CD. In this new loop the UHF/time increment value and the maximum tune time value will again be doubled, that is quadruple the original values stored in the ROM, and the system will continue tuning by branching to 12 at address 98. The sequence will be as previously described where the lapsed time counter routine will be performed with a new UHF/time increment value and maximum time value which will be double the previous value. This provides for a high speed bit weight update in the tuning of the UHF channel.
A binary word corresponding to each of the individual VHF and UHF channels selected
may be programmed into the nonvolatile memory matrix by the manufacturer
of the system prior to sale. The binary tune word would correspond to
the nominal tune voltage of the corresponding channel. In the
alternative, however, the manufacturer may allow the ultimate user to
perform this function. In this instance the user would initially go
through the tuning mode for each channel selected until the tune voltage
is arrived at that satisfies the user's requirement. At this point the
tune word would be stored into the nonvolatile memory by one of the
write modes defined in the instruction set.
Whereas the present invention has been described with respect to a specific embodiment thereof, it will be understood that various changes and modifications will be suggested to one skilled in the art, and it is intended to encompass such changes and modifications as fall within the scope of the appended claims.
This invention relates in general to the tuning of a broadcast receiver, and more particularly relates to the tuning of a television receiver using a non-volatile memory for storing binary tuning words that are electrically updated by a microcomputer type architecture control circuitry.
Previously developed electronic channel tuning systems have not been sufficiently flexible to enable wide-spread use for a variety of different types of television sets in applications. For example, certain previously developed systems have required extremely uniform varactor tuning diodes to enable channel tuning, thereby allowing insufficient tolerances for conventional variances between varactor diodes. Other previously developed systems have not been sufficiently modular to enable a selection of various types of channel access or displays. Moreover, previously developed electronic channel tuning systems have not been sufficiently economical to fabricate and have required uneconomical printed circuit boards or other uneconomical fabrication techniques for construction. For example, certain prior systems have required expensive potentiometers for each channel desired to be tuned. In addition, previously developed electronic television tuning systems have not satisfactorily satisfied recent regulatory requirements which call for a television tuner to provide a comparable capability and quality of tuning for both VHF and UHF stations. Specifically, such prior tuning systems have not enabled selection of precise UHF channels, nor have the prior systems provided means for easily changing selected UHF channels.
A major disadvantage in the channel tuning sections of television receivers has been the inability to electronically program and store tune voltages under all operating and non-operating conditions without using an auxiliary power source or a mechanically programmed memory. Existing electronically operable tuners are dedicated electronic circuitry to program tune voltage information in volatile memories where the volatile memories require batteries to provide standby power when the main power source is removed. The batteries are undesirable because they represent an additional cost to the manufacturer and a present a long-term tune voltage jeopardy if they fail when the main power source is removed. Memory loss due to battery failure can occur if there are poor battery connections, battery corrosion, or excessive battery drain. Other tuning systems use potentiometers to retain the channel tune voltage, but are also undesirable because they are not electronically alterable, and require a potentiometer for each channel to be tuned.
In accordance with the present invention, the undesirable characteristics are eliminated by using a non-volatile DIFMOS memory matrix to store the channel tune voltages. The DIFMOS memory (dual injection floating gate MOS technology) is electronically alterable and has a projected memory retention capability of over 100 years with power removed. The control circuitry for the system uses a microcomputer type architecture to integrate the user control inputs and to generate the signals needed to access and alter the DIFMOS memory matrix. A principal advantage of this type of control compared to the dedicated control circuit approach is the ease with which different manufacturers' system requirements can be satisfied by simply reprogramming the algorithm of the instruction memory.
Accordingly, an object of the present invention is to provide an electronically programmable television tuning system having a non-volatile memory matrix for the storage of binary tune words.
Another object of the present invention is to provide electronic alterable tuning means for a broadcast receiver using a microcomputer approach, thereby eliminating the need for dedicated control circuitry.
Yet another object of the present invention is to provide means for electronically updating binary tune words of a selected channel in the tuning of a television receiver and for storing the updated binary words in a non-volatile memory matrix.
Still a further object of the present invention is to provide a means for generating a binary tune word corresponding to a selected UHF or VHF channel within the limits of a binary minimum and maximum word stored in a memory matrix.
SUMMARY OF THE INVENTION
A television tuning system is taught having a non-volatile RAM memory for storing digital tune words that are electronically u
pdated by a
microcomputer type architecture control circuitry. A five-bit binary
address word is provided for addressing a 15-bit binary word from a
non-volatile memory matrix. The 15-bit binary word comprises 14 bits
corresponding to a tune word for the channel selected and a 15th MSB as a
skip toggle indicator. The 20 bits are stored in three shift registers
in the data in/out circuit in a 5-bit address buffer, a 1-bit skip
toggle buffer, and a 14-bit data buffer register. The 14-bit tune word
is placed in a data latch comparator for the PWM generator. An analog
circuit provides the voltage conversion of the digital output of the PWM
generator proportional to the tune word for applying to the varactor
tuner of the TV at a selected frequency. The binary tune word is incremented or decremented to provide an updated tune word in tuning the system by means of a microcomputer approach. The binary tune word is written and read from the non-volatile memory by the same microcomputer system.
The 14-bit binary tune word is updated either by external user control or AFC tuning. In either mode of operation, the tune word is incremented or decremented within a minimum and maximum binary tune word that is stored in a ROM memory matrix. In addition, increment values and tuning time limits are also stored in the ROM memory matrix. An arithmetic logic unit comprising a temporary storage RAM file, two 14-bit working registers, and a 1-bit full adder provide the means for perf
orming the system's computations. An 8-bit program counter provides the binary address of instructions in the 8 × 256 instruction ROM which addresses the PLA decode providing for an instruction generator. The PLA decode provides 26 "and" functions and 12 "or" functions. In addition, a 12 to 1 input logic status switch provides the necessary status indication for the 12 external controls. These input signals are detected by a 1-bit status latch.
The system is partitioned into two major functions: the non-volatile memory and the digital to analog converter and control circuits. The channel addressing and varactor diode band selection is generated with a rotary switch assembly. While a rotary switch assembly was used to implement the embodiment, non-volatile memory designs have been generated for addressing and band selection and could be easily implemented. The tune voltage interface between the digital to analog converter and the varactor diodes use standard oscillator and amplifier buffer circuits to provide the AFC summing and UHF tuning functions.
BRIEF DESCRIPTION OF THE DRAWINGS
The novel features believed characteristic of the invention are set forth in the appended claims. The invention itself, however, as well as further objects and advantages thereof, will best be understood by reference to the following detailed description of an illustrated embodiment taken in conjunction with the accompanying drawings, in which:
FIG. 1 is a functional block diagram employed to illustrate the present invention in a TV receiver.
FIGS. 2, 2A-2B are detailed circuit diagrams of the input buffer registers in the data in/out circuit.
FIGS. 3, 3A-3B are detailed circuit diagrams of the ROM constant file and its addressing circuitry.
FIG. 4 is a detailed circuit diagram of the automatic channel shift encode.
FIGS. 5, 5A-5D are detailed circuit diagrams of the instruction ROM, program counter, and microprogram counter.
FIGS. 6, 6A-6D are detailed circuit diagrams of the instruction PLA.
FIGS. 7, 7A-7B are detailed circuit diagrams of the input logic status switch.
FIGS. 8, 8A-8D are detailed circuit diagrams of the arithmetic logic unit.
FIGS. 9, 9A-9B are detailed circuit diagrams of the PWN generator.
FIGS. 10, 10A-10B are detailed circuit diagrams of the analog circuitry.
FIGS. 11A-11H are detailed architecture diagrams of the microcomputer system.
FIG. 12 represents the tune voltage amplifier diagram and related equations for calculating binary words corresponding to tune voltages.
FIGS. 13, 13A-13L are detailed drawings of the instruction set algorithm for the non-volatile stationary memory tuning system.
DETAILED DESCRIPTION
A more complete understanding of the detailed embodiment will be understood by a brief description of the requirements of the system. The fine tune up or down is accomplished by a rocker switch with center off position. A closed position on the switch will increment the tune voltage at the rate of 2 to 8 steps per second. The fine tune control is operative on VHF and UHF tuning modes.
UHF programming is accomplished by pushing a potentiometer control knob and turning the knob pointer to the desired chan
nel number. When the knob is pushed, a
contact is switched to ground. The knob is spring loaded in the out
position and cannot be turned unless pushed in. The UHF programming
potentiometer has approximately 30 turns. The user is able to fine tune a
UHF station with this potentiometer and also with a fine tune rocker
switch. The UHF fine tune limit is said to be plus or minus 128 steps
from the binary word stored in the non-volatile memory RAM matrix only
when the fine tune rocker switch is used. If the user continues to hold
the rocker switch in the same mode after 128 steps, the tune voltage
reverses direction and increments in the other direction for 256 steps
until it hits the other limit where it reverses direction again. Storage and memory requires approximately 240 milliseconds. The binary tune voltage word and skip signal is stored when the set is turned off. If any tuning control for the channel skip button has been engaged while addressing the channel, the tune voltage and skip will also be stored in the memory when a channel change occurs.
An interchannel AFC defeat pulse occurs between each adjacent channel position. The pulse occurs when a switch contact is momentarily shorted to ground. The duty cycle of the pulse is approximately constant versus the rate of rotation of the channel select knob. The duty cycle is about 25% contact closed and 75% contact open. The binary input address is sampled and latched at the end of a write time or 48-68 milliseconds after receipt of the last interchannel pulse, whichever occurs last. A user programmable skip channel signal output is utilized. The operator uses a pushbutton to change the state of the signal.
The system has been designed for a 20 channel capacity. This includes 12 dedicated VHF channels plus 8 undedicated UHF channels. In VHF mode, a ROM plus non-volatile RAM approach is used to limit fine tuning. The ROM plus RAM make up a 14-bit tuning word plus a 1-bit skip flag. The RAM is 8-bits tuning word plus skip flag. The system is designed such that the LSB of the 8-bit tuning word can be reprogrammed for each VHF channel to occur anywhere from the LSB position to the 7th bit of the 14-bit tuning word. In the UHF mode the RAM shall be 14-bits for the tuning word plus 1 bit for skip flag.
Referring
now to the block flow diagram of FIG. 1, the TV tuning microcomputer approach flow diagram is indicated. The television receiver 2 has a selector switch 26 for generating an address for the non-volatile memory matrix contained in the microprocessor circuitry 4. A more detailed block diagram of the non-volatile memory architecture and address architecture is indicated in FIG. 11A. In one embodiment the non-volatile memory comprises a DIFMOS memory matrix (dual injection floating gate metal oxide semiconductor). Data retention without power is achieved by storing charge on an array of floating gates. Any floating gate in the memory array can be charged or discharged by the injection of electrons or holes from an avalanche plasma formed in two special injector structures within each bit. Once a floating gate has been charged, it will stay charged almost forever, unless it is intentionally discharged by reprogramming. The decay rate of a charge from a floating gate has been measured at less than 1% of the initial value per decade of time at 85° C. In the embodiment described the Texas Instruments X-929A decoded 32 bit non-volatile RAM semiconductor memory is used. However, other non-volatile memories may additionally be used in the present invention.
The channel shift encode is provided to normalize the bit weighting of the increment value for selected VHF channels. The normalized binary word is applied to the microprogram counter to provide shift controls to the various shift registers of the tuning circuitry in the VHF mode.
Input commands by the user is read into the system by means of the input logic and status latch. This provides a means of detecting a change of state on the input switches during a tuning function so that the system may be changed to the latest input command. The change of state is detected by a status latch which loads a new address of the instruction ROM into the program counter.
The program counter provides any one of 256 instruction addresses of the instruction ROM. The instruction ROM addresses the constant memory matrix which contains the upper and lower limits for the VHF and UHF channels, increment values for both VHF and UHF tuning, time increments, write time, and maximum times. In addition, the instruction ROM addresses the instruction PLA which contains decoding for 26 "and" functions and 12 "or" functions.
The ROM constant memory matrix transfers the data to the arithmetic logic unit which contains 2 working registers, a 1 bit full adder and a RAM temporary storage file. The arithmetic logic unit provides for the operation of incrementing and decrementing tune words, providing for write times, and time out functions. The new binary tune word from the arithmetic logic unit is loaded into the data in/out circuitry or read from it. In all aspects of the operation of the present invention, the binary tune word corresponding to the individually selected channel in both the VHF and UHF mode are stored in the non-volatile RAM memory matrix for addressing upon channel selection.
Referring now to FIGS. 2A-2B the data in/out circuitry comprising the input buffer registers is indicated in greater detail. A 5 bit address buffer serial register 230 is provided in addition to 2 D flip flops 232 and 254. A 3 to 1 encode 236 is provided for transmitting of data to the 14 bit input data buffer serial register 234A-234B. Data stored in the input data buffer is parallel loaded into the 14 bit data latch serial register 238A-238B the output of which is parallel loaded into a 14 bit pulse width modulated logic latch serial register. The D flip flop 232 provides as a 1 bit skip toggle buffer for the MSB of the tune word.
A more detailed circuit diagram of the address decode and ROM
constant file is indicated in FIGS. 3A-3B. Five bits from the address generator and 4 bits from the instruction ROM are decoded to address the 32 by 14 bit ROM constant file 264A-264B. The output of the ROM constant file is loaded into a 14 bit B working register.
The instruction ROM, program counter, and microprogram counter circuitry are indicated in greater detail in FIGS. 5A-5D. The 8 by 256 bit instruction ROM 286A-286B is addressed by the 8 bit program counter 290A-290B. The 8 bit program counter is divided into two serial registers comprising 4 MSB's and 4 LSB's. The LSB's are loaded directly from the 8 bit instruction program word from the instruction ROM. The 4 MSB's are loaded into the program counter by means of the 4 bit page latch 294. In addition, 6 bits of the instruction program word are applied to a PLA decode and 4 LSB's of the instruction program word are applied to a 9 by 32 address decode of a ROM constant file. The 8 to 4 encode 302A and 302B is addressed by 4 LSB's from the 8 bit instruction word and 4 bits from an automatic channel shift encode. These 8 bits are encoded to 4 bits which addresses the 4 bit microprogram counter 400. Also, the 4 LSB's from the instruction ROM addresses a 4 to 12 decode for an input logic status switch. Two of the 4 LSB's addresses a 2 to 4 decode of a temporary storage RAM file in the arithmetic logic unit.
FIGS. 6A-6B is a more detailed circuit diagram of the instruction PLA. Six bits of address from the instruction ROM are used to address the 6 by 28 by 12 bit PLA decode. The output of the PLA comprise 26 "and" functions and 12 "or" functions.
FIGS. 7A-7B is
a more detailed circuit diagram of the input logic status switch. The
12 inputs to the status switch are read by decoding 4 LSB's of
instruction word from an instruction ROM. An indication of a match
between the decode and the 1 of 12 inputs is indicated by the setting of
a status latch 282. This status latch is loaded to the one state in the
presence of any of the 12 input functions and a matching code.
FIGS. 10A-10B are a more detailed circuit diagram of the analog circuit for converting the digital output of the PWM generator of an analog voltage to be applied to the varactor tuner of the television. In addition, circuits for PWM power up clear, AFC defeat, interchannel pulse, and UHF up/down circuitry are provided.
Referring now to the system diag
ram of FIGS. 11A-11H, the TV tuning
microprocessor architecture is indicated in greater detail than the
block diagram of FIG. 1. The 5 bit binary channel address is read off
the 20 position selector switch 202 by means of the address generator
204 in FIG. 11A. The binary address corresponds to any one of 20
channels, 12 of which are VHF channels and 8 of which are UHF channels.
In addition to the channel addressing the selector switch has means for
channel interrupt selection 224, means to select the varactor band of
the TV tuner 226, and means to program AFC bias on and off 228. The
channel address is read directly into the 5 bit address latch 206 in the
non-volatile RAM circuitry. Information in the 5 bit address latch 206
is used to address the 32 bit addressable non-volatile RAM matrix and
also provides a parallel input into a 5 bit address shift register 208.
The 5 bit address on a multibus line from the selector switch is used to
address one of the 20 locations in the non-volatile memory circuitry
used to retain the binary tune word. Provided in the memory circuitry
are 12 VHF binary tune words and 8 UHF binary tune words.
In series with the shift register 208 is a 15 bit data out shift register 210. These two shift registers 208 and 210 are in a read mode when not programmed to shift out. Therefore they are always looking at and reading the address latch 206 and the 15 bits of the memory matrix 212. Fourteen bits of the non-volatile RAM matrix are used for representing the binary tune word and the 15th MSB is used for a skip toggle indicator. The 20 bits comprising 5 from the address register and 15 bits from the data out register are serially shifted out when we read the non-volatile memory 212. As the bits are serially shifted out they are also fed back into the stack in a serial manner by loop 222 so that the 5 bit address and the 15 bit data tune word are restored into the registers.
The address and data tune word as they are shifted out of the registers into the control chip are fed into a 20 bit input data buffer comprising a 5 bit address buffer 230, a 1 bit skip toggle buffer 232, and a 14 bit input data buffer register 234 indicated
The binary tune word in data buffer register 234 is loaded parallel into the 14 bit PWM logic latch 248 when there is a load PWM (LPWM) signal on the 14 bit data latch 238. The 14 bit tune word in the PWM logic latch 248 is used as a compare word for the 14 bit pulse width modulator counter 250. The pulse width modulator operates with a 1 MHz input clock from the PWM buffer and oscillator 252 that is fed into the 214 PWM counter 250 and runs continuously.
The PWM counter 250 counts from binary 0 in a binary manner until it reaches one of two conditions. First, if the binary word of the counter 250
compares with the 14 bit tune word in the PWM logic latch 248 then
the PWM logic latch which is performing a magnitude compare will provide
an output signal and trip a flipflop which will then remain in that
state until the counter completes its count-out cycle. The second
condition is when the PWM logic latch 248 is at an all 1 state whereby
the PWM counter would count up to an all 1 state that also corresponds
to the runover point of the counter. Therefore, the PWM counter will
always count up to 214 and then run over where 214 and a 1 MHz input corresponds to a writeout at 16 milliseconds. In the PWM generator we therefore have a magnitude compare of the PWM counter with the 14 bit tune word stored in the 14 bit PWM logic latch 248 and when the first time there is a match of the counter and the binary magnitude we receive an output signal from the PWM logic latch 248 proportional to the tune word. To tune the television we alter the pulse width modulated signal from the PWM logic latch 248. We alter the pulse width modulated signal by changing the bit value of the binary tune word contained in the PWM logic latch thereby giving us a modulated pulse width at a duty cycle of 16 milliseconds.
The skip toggle bit in the skip toggle buffer register 232 may be altered by means of the skip toggle inputs through the MAND gate 256. In the program algorithm when the skip toggle is altered we read the information out and write it into memory once the function is complete. Altering of the skip toggle information is achieved by first reading the state of the skip toggle buffer 232 which contains an MSB that was read out of memory, loading that bit into a D register 254, and changing that information if we have a program input to change the state of the skip toggle. A skip toggle output 258 is provided to give an indication that the skip toggle has been altered and the present program condition of the skip toggle. The skip toggle is not applicable to a mechanical rotary type selector switch system as indicated in this embodiment whereas the selector switch 202 is of a rotary type. However, by replacing the rotary selector switch with an electronically addressable circuit as disclosed in U.S. Pat. No. 3,968,443 issued on July 16, 1976, assigned to Texas Instruments Incorporated, the same assignee of the present patent application, then a skip function would be applicable in the present tuning circuitry.
After loading the address buffer 230 with the 5 bits of address from the address generator 204 these 5 address bits are transferred in a parallel mode to the 9 by 32 address decode 260 and the 5 to 4
automatic channel shift encode (VHF only) 262 indicated in FIG. 11C. The automatic channel shift encode is used to determine whether the system is functioning in the UHF or VHF mode. If the system is functioning in the VHF mode the automatic channel shift encode provides one of four possible codes for incrementing the VHF tune word. The four codes corresponding to the particular incrementing bit value that applies to the VHF channel that has been selected by the address generator 204. Since there are only four increment rate values and 12 VHF tune words, the encode 262 selects depending upon which channel the system is on one of the four incrementing rate values to be applied to the given tune word.
The 5 bit address from the address buffer 230 is al
so parallel applied to the 9 by 32 address
decoder 260 to select a 14 bit data word stored in the ROM constant file
264. The 5 bit address which determines the VHF or UHF channel is
decoded by the 9 by 32 address decoder into a 32 bit address word to
address the 32 by 14 ROM constant file. The four LSB's of the
instruction code determines which of the 32 words we are addressing.
These 32 fourteen bit words in the ROM constant file comprise upper and
lower limits for the VHF channels, UHF channel limits, increment values
for both VHF and UHF tuning, time increments, maximum times, and write
time. When we have read a tune word into the input data buffer 234 and want to perform a tuning function upon it, we transfer the 14 bits of data out of the input data buffer register and into the 14 bit A working register 266 by means of a read input data buffer (RIBD) command at the 4 to 1 encode switch 270. Also, the 14 bit word is serially transferred back into itself by means of loop 272. After loading register A with the 14 bit tune word, the tune limit and increment value is outputted from the 14 bit ROM constant file and loaded into the 14 bit B working register 274. These values are now loaded into the temporary storage RAM file 276 by selection of the LBMX command on the selector switch encode 278. The temporary storage file comprises a 4 by 14 bit RAM file. Tuning is now performed by adding an increment value which is stored in register B to the 14 bit tune word stored in register A if the system is in a tuned upmode and subtracting them if the system is in a tuned downmode.
The incremented or decremented tune word is restored into the A working register by means of the "A" normalize command on the selector switch encode 270 indicated in FIG. 11D.
After the restore operation the updated 14 bit tune word is transferred into the input data buffer 234 by performing a load input data buffer (LIDB) command on selector switch encode 236. The updated tune word is now stored into the input data buffer and also restored into register A. The updated tune word is now loaded into the 14 bit PWM logic latch 248 whereby the PWM counter 250 can compare its out to updated tune word.
Whenever a tuning function is performed the system goes through a sequence whereby it performs an addition and a time out routine in the arithmetic logic unit by decrementing our timing word until a negative number is reached. In each case information is read from the ROM constant file and stored into the temporary storage RAM file. This information is a function of the particular channel and whether the channel is a UHF or VHF channel. In the sequence the system always goes through reading the input switches so if there is a change of state on our input switches during a tuning function it will be detected and the system function will be changed to the latest input command.
These input control functions are read into the system by means of the 12 to 1 input logic status switch 280 having 12 inputs indicated in FIG. 11F. A 61 kilohertz slow clock is provided to perform the write function which in the case of the non-volatile memory comprising DIFMOS memory cells takes in the order of 100 milliseconds to write a 0 into the memory, therefore requiring a clock running at a slower rate then the control or processing clock that is normally used. The slow clock is also used to provide dampening when in the power up mode or after we have already completed a write command in writing into memory so that the system doesn't read the new word while it is still settling.
Another input is the UHF/VHF control line that is a function of the particular address that has been detected from our selector switch 202. A third and fourth input is an AFC high and an AFC low select. The function of the AFC high/low is to provide a digital AFC control function. The means of achieving the digital AFC control is not indicated in the figures or represented in the algorithm. However, the digital AFC control system could be incorporated into the architecture by means of a couple of comparator windows and the appropriate addition of control logic to the present algorithm.
A fifth input is a UHF up/down control that is a control from a comparator 282 that determines whether the tune voltage is above or below the corresponding potentiometer setting of the UHF channel coarse tune potentiometer 284. An additional input is a power on/off select. Upon a power down input the 14 bit tune word stored in the input data buffer register 234 is written into the addressable non-volatile memory.
The seventh input is a skip toggle input which is not incorporated into the present system. This skip function if made available would allow for the skipping over of selected channels but is not applicable to a mechanical rotary switch as noted above.
The eighth and ninth inputs comprise the rocker arm fine tuneup and fine tunedown for the control voltage. The UHF tune on/off control places the tuning function into a coarse UHF tuning mode. The AFC on/off switch is used to activate the internal AFC tuning function or to allow for the external manual tuning mode. The final switch on the input logic status switch is the interchannel pulse that is inputted from the selector switch 202 by mea
ns of the channel interrupt line 224. The interchannel pulse provides
an indication that the selector switch is in between channels in a
changing mode and also detects the completed change. The twelve inputs are read into the input logic status switch. If one of the twelve logic status switches is activated it is compared with a particular select code and if there is any indication of a match on the read command of that given instruction to the particular switch being closed or opened as the case may be, the status latch flip-flop 282 is set. The status switch inputs are decoded by the 4 to 12 decoder 284 which is addressed by four LSB's of instruction from the instruction ROM 286. The status latch 282 provides an indication that the system has received an input corresponding to one that has been coded in the instruction table of the decoder 284.
The second input to the status latch 282 is the carry input from the one bit full adder when the system is in a subtract routine and if the subtract routine results in a negative number. The negative number indication is used to perform compare tests to determine whether an upper or lower tuning limit or timing limit has been reached. The setting of the status latch 282 provides an input to the instruction ROM 286 to load the program counter with a new page of instruction address.
The eight bit program counter 290 indicated in FIG. 11C receives its count clock input from the 250 kilohertz clock 292 which is a one quarter division of the one megahertz clock from the PWM counter 250. The program counter gives any one of 256 instruction addresses for the instruction ROM 286. The location of the program counter in its counting sequence may be altered by loading in a new eight bit word into the program counter. The four LSB's from the instruction ROM are parallel loaded into the four LSB positions of the eight bit program counter and parallel loaded into a four bit page batch 294. If the status latch is set by a subtract operation from reading an input from the logic status switch, then upon a load page command (LPD) applied to the NAND gate 296 the four LSB bits of address with be loaded from the page latch into the program counter in the MSB position.
The output of the instruction ROM 286 feeds into the instruction PLA circuitry 298 which outputs 26
The four bit microprogram counter 300 is used to provide shift controls to the various shift registers of the tuning circuitry. And more particular, the microprogram counter allows for the shifting of the 14 bit data word in working register A into the input data buffer register. In addition it allows for the addition and subtraction of working registers A and B and also allows for the transfer of data to the non-volatile memory.
The maximum number of serial shifting by the microprogram counter is 14 bits. When the shifting produced by the microprogram counter is completed, the system operation is returned to the eight bit program counter where it is indexed to the next address in the program. The eight bit microprogram instruction is selected by the microprogram address select encode 302. Four bits from the automatic channel shift encode 262 and four LSB's from the instruction ROM are loaded parallel into the address select encode to provide four bits of instruction address for the microprogram counter 300.
Referring to FIG. 11D a switch encode 304 is provided to allow for a restore operation whereby the 14 bit word in the B working register is shifted back into itself. In addition the switch encode provides for a shifting of the 14 bit word from the temporary storage RAM file 276 into the working register. Switch encode 270 allows for the shifting of a 14 bit word into the A working register from the temporary storage RAM file, the input data buffer register 234, a sum product from the addition of working register A and register B by means of the one bit full adder 288, and finally the restore of the word in the A register into itself.
The temporary storage RAM file 276 is addressed by two bits from the instruction ROM through a 2 to 4 encode 306. The four bit word from the encode is used to select one of four 14 bit storage files in the RAM file 276 by means of the 4 to 1 selector encode 308.
The pulse width modulated output 310 from the PWM logic latch is fed into the PWM buffer 252.
The PWM signal from the PWM buffer is fed into a driver buffer 312 that is referenced to +5 volts in FIG. 11H. The PWM output continues through a three stage PWM filter to provide the IC filtering required for the resolution and ripple voltage needed for a pulse width modulated signal of the longest duration to an acceptable level in the UHF mode. The VHF mode would not need as much filtering to generate a PWM at an acceptable ripple level. However, at least three stages are required for UHF filtering.
The output of the three stage filter is a DC voltage that is proportional to the pulse width modulated signal, the pulse width modulated signal being proportional to the 14 bit tune word that has been loaded into the 14 bit input data buffer register and PWM logic latch. The tune voltage is amplified by inverting voltage amplifier 316 and subsequently filtered by an additional single stage filter 318. The final DC analog tune voltage is passed to the television varactor tuner for tuning to the selected channel.
A second comparator 282 comprises a UHF up/down comparator which receives its inputs from the three stage PWM filter and a UHF course tune potentiometer 284. The potentiometer is referenced to the same +5 volts as the driver buffer 212. The comparator 282 provides an indication as to whether or not the system is in the coarse tune mode of UHF, whether or not the system is above or below the desired tune voltage for the particular channel setting, and provides a coarse tuning signal for the controller.
FIG. 320 represents the power supply required for the operation of the tuning system. The +5 volts used to provide the upper voltage for the tuning amplifier for the varactor tune voltage output. The +17 volts is used for bia
sing of the MOS circuitry of the
non-volatile memory. The +10 volts is used for biasing the CMOS logic in
the system. The +5 volts is used for the TTL and I2 L logic
in the system. Finally, the 0 to -35 switch voltage is used for
programming the non-volatile memory when the system is in a write mode. In performing a tuning function using the microcomputer approach in the VHF mode a binary tune word that is stored in the input data buffer register is incremented or decremented within the limits for the minimum and maximum tune voltages for the selected channel that is stored in the ROM constant file. The ROM constant file contains a binary word for the maximum tune voltage and minimum tune voltage for each of the 12 VHF channels. These limits establish the range of tuning permitted by the system. These values are individually selected for each of the VHF channels. In a similar manner minimum and maximum limits are established for the UHF channel. However, due to the large number of UHF channels the minimum and maximum limit are established so as to encompass all 72 UHF channels with tuning for the selected UHF channel falling therebetween.
Referring now to FIG. 12 the schematic diagram used for calculating the minimum and maximum tune voltages is indicated in addition to the equations used. Equation 3 is the input voltage as a function of the output tune voltage. Given the desired tune voltage EO the input voltage Ei may be calculated. In addition, by using equation 4 the bits corresponding to the input voltage is calculated thereby resulting in the binary tune word corresponding to the calculated input voltage.
In this regard, Table I indicates the VHF ROM constants for the minimum limits as established by equations 3 and 4. Each of the VHF channels have a unique binary word corresponding to the minimum voltage limit. In a similar manner Table II indicates the VHF ROM constant for the maximum tune voltage. As noted the nominal tune voltage for tuning the television will lie somewhere between these two established limits. The binary words comprise 14 data bits and are addressed by the 5 bit binary address from the selector switch.
| TABLE I |
| __________________________________________________________________________ |
| VHF ROM CONSTANTS (MINIMUM) NOM MAX MIN CH# EAFC Eo Ei BITS 8192 4096 2048 1024 512 256 128 64 32 16 8 4 2 1 |
| __________________________________________________________________________ |
2 1.549 2.149 1.442 4725 0 1 0 0 1 0 0 1 1 1 0 1 0 1 3 1.814 4.320 1.367 4479 0 1 0 0 0 1 0 1 1 1 1 1 1 1 4 2.310 7.158 1.444 4731 0 1 0 0 1 0 0 1 1 1 1 0 1 1 5 4.589 23.000 1.301 4263 0 1 0 0 0 0 1 0 1 0 0 1 1 1 6 4.528 29.885 0- 0- 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 2.299 7.550 1.361 4459 0 1 0 0 0 1 0 1 1 0 1 0 1 1 8 2.490 9.440 1.249 4092 0 0 1 1 1 1 1 1 1 1 1 1 0 0 9 2.726 11.790 1.107 3627 0 0 1 1 1 0 0 0 1 0 1 0 1 1 10 3.021 14.710 0.934 3060 0 0 1 0 1 1 1 1 1 1 0 1 0 0 11 3.594 18.370 0.955 3129 0 0 1 1 0 0 0 0 1 1 1 0 0 1 12 4.049 23.000 0.665 2179 0 0 1 0 0 0 1 0 0 0 0 0 1 1 13 4.621 29.920 0.103 337 0 0 0 0 0 1 0 1 0 1 0 0 0 1 |
| __________________________________________________________________________ |
| TABLE II |
| __________________________________________________________________________ |
| VHF ROM CONSTANTS (MAXIMUM) NOM MIN MAX CH# EAFC Eo Ei BITS 8192 4096 2048 1024 512 256 128 64 32 16 8 4 2 1 |
| __________________________________________________________________________ |
2 1.549 0.400 1.754 5747 0 1 0 1 1 0 0 1 1 1 0 0 1 1 3 1.814 0.888 1.979 6484 0 1 1 0 0 1 0 1 0 1 0 1 0 0 4 2.310 2.149 2.339 7664 0 1 1 1 0 1 1 1 1 1 0 0 0 0 5 4.589 4.682 4.572 14,980 1 1 1 0 1 0 1 0 0 0 0 1 0 0 6 4.528 12.260 3.147 10,311 1 0 1 0 0 0 0 1 0 0 0 1 1 1 7 2.299 4.624 1.884 6173 0 1 1 0 0 0 0 0 0 1 1 1 0 1 8 2.490 6.010 1.861 6098 0 1 0 1 1 1 1 1 0 1 0 0 1 0 9 2.726 7.550 1.865 6111 0 1 0 1 1 1 1 1 0 1 1 1 1 1 10 3.021 9.440 1.875 6144 0 1 1 0 0 0 0 0 0 0 0 0 0 0 11 3.594 11.790 2.130 6979 0 1 1 0 1 1 0 1 0 0 0 0 1 1 12 4.049 14.710 2.145 7028 0 1 1 0 1 1 0 1 1 1 0 1 0 0 13 4.621 18.370 2.166 7097 0 1 1 0 1 1 1 0 1 1 1 0 0 1 |
| __________________________________________________________________________ |
The data including the VHF minimum and maximum limits are stored in the ROM constant file as indicated in Table III. As noted the ROM constant file has 32 separate data values stored therein. The VHF and UHF increment values are also stored in the ROM constant file. The maximum time for both VHF tuning and UHF tuning are also stored therein. In addition, the time increment value is also stored. Finally, the UHF minimum tune word and the UHF maximum tune word including the write time is stored in the ROM constant file.
| TABLE III |
| ______________________________________ |
| ROM CONSTANT FILE Add- Prom ress Code Instruction No. Binary Msb Lsb |
| ______________________________________ |
# 2 VHF MIN 0 00000 0 010 0100 0 111 0101 # 2 VHF MAX 1 00001 0 010 1100 0 111 0011 # 3 VHF MIN 2 00010 0 010 0010 0 111 1111 # 3 VHF MAX 3 00011 0 011 0010 0 101 0100 # 4 VHF MIN 4 00100 0 010 0100 0 111 1011 # 4 VHF MAX 5 00101 0 011 1011 0 111 0000 # 5 VHF MIN 6 00110 0 010 0001 0 010 0111 # 5 VHF MAX 7 00111 0 111 0101 0 000 0100 # 6 VHF MIN 8 01000 0 000 0000 0 000 0000 # 6 VHF MAX 9 01001 0 101 0000 0 100 0111 # 7 VHF MIN 10 01010 0 010 0010 0 110 1011 # 7 VHF MAX 11 01011 0 011 0000 0 001 1101 # 8 VHF MIN 12 01100 0 001 1111 0 111 1100 # 8 VHF MAX 13 01101 0 010 1111 0 101 0010 # 9 VHF MIN 14 01110 0 001 1100 0 010 1011 # 9 VHF MAX 15 01111 0 010 1111 0 101 1111 #10 VHF MIN 16 10000 0 001 0111 0 111 0100 #10 VHF MAX 17 10001 0 011 0000 0 000 0000 #11 VHF MIN 18 10010 0 001 1000 0 011 1001 #11 VHF MAX 19 10011 0 011 0110 0 100 0011 #12 VHF MIN 20 10100 0 001 0001 0 000 0011 #12 VHF MAX 21 10101 0 011 0110 0 111 0100 #13 VHF MIN 22 10110 0 000 0010 0 101 0001 #13 VHF MAX 23 10111 0 011 0111 0 011 1001 VHF INCRE- 24 11000 0 000 0000 0 100 0000 MENT TIME INCRE- 25 11001 0 000 0000 0 000 0001 MENT MAX TIME 26 11010 0 000 0101 0 000 1100 (ROCKER) UHF INCRE- 27 11011 0 000 0001 0 001 0101 MENT UHF MIN V 28 11100 0 000 0000 0 010 0000 UHF MAX V 29 11101 0 111 0100 0 101 0110 WRITE TIME 30 11110 0 000 1100 0 001 1011 MAX TIME 31 11111 0 000 0000 0 010 1000 (UHF) |
| ______________________________________ |
Table IV indicates the PLA logic for automatic right shift addressing (VHF onl
y) of the microprogram counter. As noted from Table III the VHF
increment value has a 1 in the 7th bit position. During the incrementing
or decrementing of the VHF word it is desired to increment or decrement
at a particular bit weight value unique to each of the VHF channels. To
accomplish this, the automatic channel shift encode provides for right
shifting of the increments value so as to normalize it to provide a
different bit weight for each of the 12 UHF channels. The number of
right shift in the VHF mode for each of the selected channels is
indicated in Table IV in addition to the encode word for the
microprogram counter preset. Since the UHF tuning is performed by a
process which provides for the increasing of the bit weight of the
increment value, the normalization by right shifting the increment value
is not needed. | TABLE IV |
| ______________________________________ |
| PLA LOGIC FOR AUTOMATIC RIGHT SHIFT ADDRESSING (VHF ONLY) OF μ PROGRAM COUNTER No. of Right Encode Word For VHF Channel Shifts For For μ Program No. Binary Word Normal Ration Counter Preset |
| ______________________________________ |
2 00000 4 1011 3 00001 3 1100 4 00010 2 1101 5 00011 1 1110 6 00100 0 1111 7 00101 3 1100 8 00110 3 1100 9 00111 3 1100 10 01000 3 1100 11 01001 2 1101 12 01010 2 1101 13 01011 2 1101 UHF 01100 10100 0 N.A. |
| ______________________________________ |
The instructional logic from the PLA decod
e is indicated in Tables V and
VI. In Table V the instruction ROM decode outputs comprising 12 NOR gate
outputs is indicated. These 12 outputs provide the "OR" logic functions
for the microcomputer program. Table VI indicates the 28 instruction
ROM decode outputs of the PLA decode. These outputs comprise 28 "AND"
logic functions for the microcomputer programming. TABLE V
INSTRUCTION
ROM DECODE OUTPUTS
(NOR GATE OUTPUTS)
1. lpc = ubrn + brn s/l
2. μpc enable = rnvm + lnvm + rsax + rsbx + add + suba + subb + rmxa + rmxb + lamx + lbmx + nora + norb + resa + resb + ridb + lidb + wro + wri + 27 bit (of p.c.)
3. ld μpc = rnvm + lnvm + rsax + rsbx + nora + norb + resa + resb
4. data in sel idb = shift cont. in code = rnvm + lnvm
5. shift cont. idb = ridb + rnvm + lnvm + lidb
6. shift cont. ram = rmxa + rmxb + lamx + lbmx
7. ram data restore sel = rmxa + rmxb
8. shift cont. reg a = rmxa + lamx + rsax + add + suba + subb + nora + resa
9. reg a sel restore a = resa + lamx + lidb
10. reg a sel Σ = add + suba + subb
11. shift cont. reg b = rmxb + lbmx + rsbx + add + suba + subb + norb + resb
12. reg b sel restore b = resb + lbmx
table vi
instruction
rom decode outputs
(nand gate outputs)
0. unconditional branch (ubrn)
a. if s/l = 1 or 0 (i.e. DON'T CARE)
1. parallel loads program counter on clk with contents of page latch and 4 lsb's of ubrn code.
2. clears s/l on clk
1. branch (brn)
a. if s/l = 1
1. parallel loads program counter on clk with contents of page latch and 4 lsb's of brn code.
2. clears s/l on clk
b. if s/l = 0
1. do nothing
2. load page (ldp)
a. load 4 bit address code into page latch (4 msb's of address).
3. read rom (rrom)
a. parallel loads reg. b with contents of rom stored at location defined by 4 bit address code and/or channel select code (if vhf).
4. read inputs (rin)
a. enables input defined by 4 bit address to be gates thru to the s/l flip/flop. if input is "0" then s/l is loaded with a "1" on clk. if input is a "1" then s/l is loaded with a "0" on clk.
5. read channel code sw. (rccs)
a. sets input strobe to a "1" level so that the channel select switch can be parallel loaded into the nvm latch buffer on the memory ic.
6. load pwm (lpwm)
a. parallel loads the contents of the input data buffer register into the pwm data register during clk.
7. sense nvm (snvm)
a. sets sense line to "0" so that the contents of the nvm can be parallel loaded into the data buffer registers on the memory ic during clk.
***the following functions enable the μ program counter***
8. read nvm buffer (rnvm)
a. selects 4 bit address code to be loaded into μ program counter.
b. loads 4 bit address (0101) into μ program counter to reset it for 10 right shift functions. load occurs during clk.
c. on clk the program counter is disabled, and the μ program counter is enabled.
d. a right shift command is provided for the input buffer registers and the nvm buffer registers until the μ program counter reaches the 1111 state (10 shifts).
e. when the μpc is 1111 then on the next clock pulse (which sets the μpc to 0000) the clk input to the μpc is disabled, and the clk input to the program counter is restored.
f. note: this command sets the data select line to the memory ic to a logic "1" level, so that data can be sequenced out of the ic into the dac.
9. load nvm buffer (lnvm)
a. same as read nvm buffer except sequence (f) is: note: this command sets the data select line to the memory ic to a logic "0" level, so data can be sequenced into the memory ic from the dac ic.
10. right shift a (r.s.a. x)
11. right shift b (r.s.b. x)
a. selects 4 bit variable address code to be loaded into μ program counter.
b. loads μ program counter during clk.
c. disables program counter on clk.
d. enables μ program counter on clk.
e. enables data shift in (a) or (b) register. data in register (a) or (b) is with leading zero's during μ program count time then right shifted according to the following shift code.
| ______________________________________ |
| code right shift operations |
| ______________________________________ |
0000 14 0001 14 0010 13 0011 12 0100 11 0101 10 0110 9 0111 8 1000 7 1001 6 1010 5 1011 4 1100 3 1101 2 1110 1 1111 0 |
| ______________________________________ |
f. when μpc is 1111 THEN ON NEXT CLK PULSE THE μPC CLK INPUT IS DISABLED AND THE PC CLK IS ENABLED.
12-1 add (a & b) (add)
a. program counter is disabled on clk.
b. μpc is enabled on clk.
c. shift controls to reg. a and reg. b are enabled.
d. reg. b restore sel. is enabled.
e. reg a Σ input select is enabled.
f. when μpc is 1111 THE μPC CLK IS DISABLED AND THE PC IS ENABLED.
12-2,3 subtract (b-a) (suba) subtract (a-b) (subb)
a. enables inverter input to adder (e) from reg. a or reg. b.
b. sets carry bit in e1 to "1".
c. pc is disabled on clk.
d. μpc is enabled on clk.
e. reg a and reg b shift control is enabled.
f. data is shifted serially from reg a and reg b into Σ.
g. data in reg b is restored into reg b without change.
h. Σ data out is stored in reg a.
i. when μpc is 1111 THEN PC IS ENABLED AND μPC IS DISABLED.
13-1 read ram ➝ a (rmxa)
read ram ➝ b (rmxb)
a. address bits (2 bits) select ram storage location.
b. control enables ram read storage gate.
c. control enabled ram ➝ a or ram ➝ b select.
d. pc is disabled on clk.
e. μpc is enables on clk.
f. ram & reg a or reg b shift gates are enabled.
g. data is shifted from ram to reg a or b until μpc is 1111 then μpc clk is disabled and pc clk is enabled.
13-3 load a ➝ ram (lamx) 1,2,3,4
load b ➝ ram (lbmx) 1,2,3,4
a. program counter is disabled on clk.
b. μpc is enabled on clk.
c. address bits (2 bits) select ram storage location.
d. shift controls for selected memory location are enabled.
e. reg a ➝ m sel. and REG A DATA RESTORE.
14-1 normalize a (nora)
14-2 normalize b (norb)
a. selects 4 bit channel encode address to be loaded into μpc (normalized code).
b. loads 4 bit channel encode address into μpc during clk.
c. pc is disabled on clk.
d. μpc is enabled on clk.
e. control enable shift gates of reg. a or b.
f. control sets reg. a and reg. b inputs (serial) to "0".
g. data is shifted in reg. a or b until μpc is 1111 then μpc clk is disabled & pc clk is enabled.
14-3 unused code
14-4 slow clock enable (sloc) switches the clock input to the μpc from t1 clock line to the slow clk line (16ms PERIOD).
15-1 read input data buffer (ridb)
a. enables buffer data select into reg a.
b. enables input buffer data restore select gate into data buffer.
c. enables input data buffer and reg. a data shift control.
d. pc is disabled on clk.
e. μpc is enabled on clk.
f. data is shifted from data buffer into reg. a until μpc is 1111, μpc is disabled and pc is enabled.
15-2 load input data buffer (lidb)
a. enables reg. a data select gate into data buffer reg.
b. enables restore select gate into reg. a.
c. control enables reg. a and INPUT DATA BUFFER SHIFT GATE.
D. pc is disabled on clk.
e. μpc is enabled on clk.
f. data is shifted from reg. a to data buffer until μpc is 1111, then μpc is disabled and pc is enabled.
15-3 clear write (cwro) resets the sense line to the memory ic to a "1"; switching the memory cells from a write mode to a read mode.
15-4 write (wro) sets the sense line to "0" on clk; thereby permitting data to be written into the memory ic cells.
15-5 dummy (unused) unused code used for dummy operations.
the op-codes for the single clock instructions including their address are indicated in Table VII.
| TABLE VII |
| ______________________________________ |
| OP-CODES SINGLE CLOCK INSTRUCTIONS FUNCTION OP-CODE ADDRESS |
| ______________________________________ |
UBRN 0000 1/0 1/0 1/0 1/0 BRN 0001 1/0 1/0 1/0 1/0 LDP 0010 1/0 1/0 1/0 1/0 RROM 0011 1/0 1/0 1/0 1/0 RIN 0100 1/0 1/0 1/0 1/0 RCCS 0101 X X X X LPWM 0110 X X X X SNVM 0111 X X X X |
| ______________________________________ |
The 4 bit and 6 bit op-codes for the microprogram control instructions including their addresses are indicated in Table VII.
| TABLE VIII |
| ______________________________________ |
| OP-CODES MICROPROGRAM CONTROL INSTRUCTIONS OP- FUNCTION CODE ADDRESS |
| ______________________________________ |
RNVM 1000 1/0 1/0 1/0 1/0 4 BIT LNVM 1001 1/0 1/0 1/0 1/0 OP-CODE RSAX 1010 1/0 1/0 1/0 1/0 RSBX 1011 1/0 1/0 1/0 1/0 LIDB 110000 -- -- 0 0 ADD 110001 -- -- X X SUBA (B-A) 110010 -- -- X X SUBB (A-B) 110011 -- -- X X RMXA 110100 -- -- 1/0 1/0 RMXB 110101 -- -- 1/0 1/0 6 BIT LAMX 110110 -- -- 1/0 1/0 OP-CODE LBMX 110111 -- -- 1/0 1/0 NORA 111000 -- -- X X NORB 111001 -- -- X X UNUSED 111010 -- -- X X SLOC 111011 -- -- 1 1 RIDB 111100 -- -- 0 0 CLR WRO 111101 -- -- 1 1 WRO 111110 -- -- X X DUMMY 111111 -- -- 1 1 |
| ______________________________________ |
The input control line read codes are indicated in Table IX. The input functions each have the same 4 MSB's (0100) and differ only in the 4 LSB's.
| TABLE IX |
| ______________________________________ |
| INPUT CONTROL LINE READ CODES RIN CODE INPUT FUNCTION 4 MSB'S 4 LSB'S |
| ______________________________________ |
UNUSED 0100 0000 CHANNEL INTERRUPT 0100 0001 AFC ON/OFF 0100 0010 UHF ON/OFF 0100 0011 FINE TUNE UP 0100 0100 FINE TUNE DWN 0100 0101 SKIP TOGGLE 0100 0110 UHF/VHF 0100 0111 POWER ON/OFF 0100 1000 UHF UP/DWN 0100 1001 AFC HI 0100 1010 AFC LO 0100 1011 SLOW CLOCK 0100 1100 UNUSED 0100 1101 UNUSED 0100 1110 UNUSED 0100 1111 |
| ______________________________________ |
The ROM constant address codes are indicated in Table X. It is to be noted that the 12 VHF channels are encoded to 12 minimum limits and 12 maximum limits and use the first 24 ROM addresses (00000 to 10111). The remaining 8 words are located in the last 8 ROM addresses (11000 to 11111), thus using a 32 word by 14 bit ROM structure. A greater understanding of the tuning system and the information contained in Tables I-X is gained by referring to the instructions set algorithm.
| TABLE X |
| ______________________________________ |
| ROM CONSTANT ADDRESS CODES RROM CODE STORED WORD (14 BITS) 4 MSB'S 4 LSB'S |
| ______________________________________ |
VHF MIN LIMIT 0011 00XX VHF MAX LIMIT 0011 01XX VHF INCREMENT 0011 1000 TIME/UHF INCREMENT 0011 1001 MAX FINE TUNE TIME 0011 1010 UHF CHANNEL LIMIT 0011 1011 UHF MIN BAND LIMIT 0011 1100 UHF MAX BAND LIMIT 0011 1101 WRITE TIME 0011 1110 MAX UHF COARSE TUNE TIME 0011 1111 |
| ______________________________________ |
Rocker Tune loop that is the channel fine tuning mode FIGS. 13G-13H, and the fourth loop is the UHF Pot Tune loop comprising the UHF coarse tuning mode FIGS. 13I-13L.
The tuning system is activated by a power up entry 1 in FIG. 13A followed by a load page command (LDP) where a 4 bit address code is loaded into the page latch 294 to address one of the 16 pages in the instruction ROM 286. A clear write (SWRO) operation is performed to reset the sense line to the memory IC to switch the memory cells from a write mode to a read mode. A read channel interrupt loop is performed whereby the system reads the channel interrupt switch until the channel interrupt indication is no longer present.
A channel interrupt indication 224 from the selector switch 202 is applied to the input logic status switch 280. When the input signal matches a 12 bit binary decode 284 the status latch 282 is set. The read channel interrupt loop continuously reads the status latch to determine whether or not it has been set. As long as the status latch has been set from an indication of a channel interrupt the system will loop back into the read mode and will continue until the signal in the status latch is eliminated by the completion of a channel selection at the selector switch 202. The purpose of the channel interrupt read operation is to prevent the system from reading the channel tune word when the selector switch is being changed from one channel to another.
Upon jumping out of the read channel interrupt loop a read channel code switch (RCCS) is performed whereby the five bit address from the selector switch and address generator is parallel loaded into the nonvolatile memory address latch buffer 206 of the memory IC. A slow clock enable signal provides dampening to offset any electromechanical bouncing that may occur during the switching operation. Additional dampening is provided by right shift of the B working register 274 (RSB3) where at a slow clock rate the working register is right-shifted 14 times into itself followed by an unconditional branch command (UBRN) to the next address in the instruction ROM.
The next instruction is to sense the nonvolatile memory (SNVM) where the 15 bit word stored in the memory is parallel loaded into the data out buffer regist
er 210 during a clock pulse. At
the same time the 5 bit address from the address latch 206 is parallel
loaded into the 5 bit address register 208. Two successive 10 right
shift operations are performed by the registers 208 and 210 upon a read
nonvolatile memory buffer command (RNVM). Upon completion of the 20 bit
right shifts the 14 bit tune word is located in the 14 bit input data
buffer register 234, the 15th bit indicating the skip indication is
located in the skip toggle buffer 232, and the 5 bit select address code
is located in the address buffer 230. The load PWM command (LPWM)
parallel loads the 14 bit binary tune word from the 14 bit data latch
238 into the 14 bit PWM logic latch 248. This provides a binary word
which is proportional to the analog voltage and sets a binary compare
word for the PWM counter that is continuously counting. When the PWM
counter reaches the 14 bit binary word that matches it in the 14 bit PWM
logic latch, a signal trips the latch and sends the output to the PWM
buffer and oscillator 252.
The digital signal is converted to an analog voltage by means of the drive buffer 312, the three-stage PWM filter 314, the tune voltage amplifier 316, and the final PWM filter 318. The analog output comprising the channel tune voltage is sent to the varactor tuner of the television.
If the system power is turned off the 14 bit tune word in the input buffer data register 234 is written into the nonvolatile memory 212. After reading the on/off power switch a 4 bit page address is loaded into the page latch 294 that corresponds to the page of instruction that the system will branch to if the system detects a power off state. In the algorithm this is page 7. The power on/off indication is read into the input logic status switch 280 which if present in the status latch the system branches to the power off write routine 4 in the algorithm at address 70.
The branch statement loads a "0" into the first four bits resulting in a page 7 instruction 0 address. Two successive 10 bit shifts are required to load the 14 bit tune word, the 1 bit skip indication, and the 5 bit select address into the nonvolatile memory. Upon two successive right shift operations the 14 bit tune word and the 1 bit skip indication is loaded into the 15 bit data in register 216 and the 5 bit select address is loaded into the 5 bit shift register 218. A write 0 command (WRO) sets the voltages in the nonvolatile memory for the subsequent write operation. The nonvolatile memory will remain in a write mode until the system is commanded to change by a clear (CWRO) command. The system is programmed for t
he duration of time it is to remain in the right mode by
a read ROM (RROM) command. Fourteen bits of data comprising the right
time is read from the ROM constant file 264 and parallel loaded into the
14 bit B working register 274. In the next operation the 14 bit word
comprising the write time is serially loaded from the B register into
the temporary storage RAM file in the third memory file location by a
LBM3 command. This command also restores the data into the working
register. The 14 bit binary write time word is now read out of the
temporary storage RAM file into the 14 bit A working register 226 by a
RM3A command. The 14 bit binary right time word is now stored in working
registers A and B. The instruction ROM 264 is again read by a read ROM command (RROM) whereby a 14 bit word comprising the UHF/time increment is parallel loaded into the B working register 274 from the ROM file. In the next operation the increment value stored in the B working register is subtracted from the magnitude word that is stored in the A working register. In a loop routine the increment value of the B register is subtracted from the decremented magnitude word in the A register until a test condition is reached where the word in the B register is greater than the word in the A register. This condition is detected by reading the status latch 282 as when the condition is satisfied a 1 will be detected. When the 1 is detected in the status latch the system will jump out of the loop and perform a clear write operation (CWRO) which takes the system out of the write mode after the time out operation.
The system now performs a loop routine of reading the channel interrupt and upon either a 0 or 1 indication in the status latch the system will loop back into the read channel interrupt mode. This provides a fixed loop to prevent the system from jumping to another part of the algorithm during a power down routine. When the system is power
ed up again the algorithm will begin at the 1 power up
entry location beginning with a load page command at address 00. The write routine was entered into by an indication of a power off signal represented by a 1 in the status latch. If the power remains on the system will continue by a reading of the skip toggle input in the logic status switch 280. A load page (LDP) command will load a new page address into the page latch 294. If a skip toggle indication is detected a 1 state will be entered into the status latch in which it will trigger the page latch and enter the new address into the 8 bit program counter 290 that will perform a branch operation to the new page address. In the branch operation a slow clock enable is performed with a second read skip toggle and another load page. If the skip toggle indication has been removed the system will load a new page into the program counter and perform an unconditional branch (UBRN) to 6 of the algorithm at address 12. This branch operation tests the skip toggle to insure that it was not an accidental input. If the skip toggle indication is still present the system will read the skip toggle switch again and perform a looping operation until the skip toggle signal has been removed. When the skip toggle input is removed the program will jump to 3 at address 87 which is the skip toggle write routine. The write operation now performed is identical to the power off write routine at 4 address 70. The nonvolatile memory is sensed by an SNVM command followed by two 10 right shift commands in loading the nonvolatile memory (LNVM). A write command (WRO) sets the voltages for a write operation in the nonvolatile memory matrix. A 14 bit binary w
ord
comprising the write time is read into the B working register 274 and is
then read out into the temporary storage RAM file in memory location 3.
It is then read into the 14 bit A working register 266. The ROM
constant file 264 is read again for the UHF/time increment value and is
loaded into the 14 bit B working register. In decrementing by
subtracting, a loop operation is performed until the contents of the
decremented A register is less than the stored increment value in the B
register. At this point the system jumps back to page 0 instruction 0 at
the power up entry level of the algorithm 1. If no skip toggle input had been detected in instruction 0 F the program would perform a read channel interrupt command at instruction 12 and a load page operation to page 0. If the channel interrupt has been detected by a 1 in the status latch the algorithm will branch to 1 which is the power up entry position at the beginning of the algorithm at address 00. If no channel interrupt has been detected the system will read the AFC on/off switch at the input logic status switch 280 and branch to 5 at address 04 which comprises a read channel code switch if an AFC on/off indication has been detected. If there is no AFC on/off indication the system will branch to 7 at address 18 which is the start of the AFC loop for the tune mode select and initialization.
With the AFC switch in the off position, the television may be tuned in a manual mode. Since the system is programmed for and has memory storage for only 8 UHF channels and there are a possible 72 UHF channels in existence, the tuning minimum and maximum limits must be set so that they may be utilized with any one of the possible 72 UHF channels. To accomplish this, a UHF channel limit is read from ROM at instruction address 5B and loads the contents into the B working register 274. In the UHF mode fixed channel limits may be set up about any one of the 72 possible channels because the varactor tuning curve has a linear transfer characteristic. This allows for the setting of fixed limits around any desired channel. The tune word from the input data buffer 234 is read into the A working register 266. The UHF tune limit in the B working register is added to the tune word in the A register and the result is stored in the temporary storage RAM file 276 in memory location 1. The original tune word is again read from the input data buffer 234 and stored into the A working register. The UHF channel limit from the B working register is now subtracted from the tune word in the A working register and loaded into the temporary storage RAM file 276 in memory location 0. This sequence of operations now stores in the temporary storage RAM file a lower tune word limit and an upper tune word limit for the particular UHF channel that has been selected.
The UHF/time increment value is read from the ROM at instruction address 62 and loaded into the B working register 274. This 14 bit binary word has a 1 in the LSB position and is used for incrementing the UHF as well as for incrementing time. This incrementor value is loaded into the temporary storage RAM file 276 in memory location 2. The temporary storage RAM file now has in its memory location 0, 1, and 2 the necessary information to perform UHF tuning if necessary. The system now reads whether the selector has been set for a UHF or a VHF channel by reading the input to the input logic status switch 280. The UHF/VHF input is directed from decoding of the 5 bit address at the address decode 260. The page latch 294 is loaded with page E and after the read operation if a UHF signal is detected by a 1 in the status latch the system will continue at address EB where the UHF on/off input is read. If a UHF tuning mode is detected the system after a load page operation will branch to 9 at address 94 which is the start of the UHF pot tune loop in the UHF coarse tune mode. If the UHF is in the off position, then the system will continue at address EE and branch to instruction 22.
This loop is applicable for both VHF and UHF tuning. If at instruction 64 a VHF mode was detected, the system would branch to page 1 instruction B where the VHF increment value would be read from the ROM constant file and loaded into the B working register 274. In the VHF mode each channel has one of four possible increment values. The increment value that has been read into the B working register is normalized by a NOR B command where a right shift operation serially shifts the VHF increment value until the weighted bit value is reached for the VHF channel that has been selected. The VHF increment value is loaded from the B working register into th
e temporary storage ramp file
276 in memory location 2. The ROM constant file 264 is read and the VHF
maximum tune word is loaded into the B working register 274 and then
loaded into the temporary storage ramp file in memory location 1. The
ROM constant file is read again for the VHF minimum tune word and is
read into the B working register and then read into the temporary
storage RAM file in memory location 0. The temporary storage RAM file now has in memory location 1 the VHF maximum tune word, in memory location 2 the weighted VHF increment value, and in memory location 0 the VHF minimum tune word. Each of the twelve VHF channels has a unique minimum tune value and a maximum tune value in contrast to the UHF channel limit.
The system at address 22 now operates in either the UHF or VHF mode. The increment value is read from the memory 2 location of the RAM file into the B working register 274. The tune word in the input data buffer 234 is read into an A working register 266. Before updating the tune word a series of read operations is performed. First the AFC on/off switch is read. If the AFC is at an on state, the program will jump to 2 at address 88 where a normal write routine is performed to write the tune word from the input data buffer into the nonvolatile memory. If the AFC control is in the off state, the system will read the power on/off input. If the power is off, the system will jump to 4 at address 70 for a power off write routine to again write the word in the input data buffer into the nonvolatile memory location. If the power is in the on state, the system will read skip toggle, and if a skip toggle is present will go into a skip toggle loop similar to that previously discussed. If no skip toggle is indicated, the system will read the channel interrupt input and if present will go to 11 at address 30 which is a rocker tune loop. If there is a channel interrupt, the system will go to 2 at address 88 for a normal write routine to write the tune word from the input data buffer 234 into the nonvolatile memory 212.
Address 30 is the start of the rocker tune loop for fine tuning in either the UHF or VHF mode. A read tune-up command is used to determine whether the system is in a tune-up mode or a tune-down mode. In a tune-up mode the system branches to address 4B where the contents of working registers A and B are added together comprising the tune word and the increment value with the result being stored in the input data buffer 234. The maximum tune limit is read out of the temporary storage RAM file into the B working register. A subtract operation at address 4E subtracts the updated incremented tune word from the maximum tune limits. If the resulting operation results in a positive number, the system will branch to address 3E and will load the updated tune word int
o the PWM logic latch 248. This address is additionally reached by
reading the tune-down indicator at address 33 and upon an indication of a
tune-down input checking the PWM tune word against the lower tune
limit. The PWM logic latch 248 will be loaded where upon subtracting the
lower tune limit from the tune word results in a positive number at
address 3D. After loading the PWM, a timing routine is performed. This routine provides a fixed timing sequence for incrementing the tuned word. The present system is designed for eight pulses per second. However, other timing sequences may be employed; for example, 16 pulses per second or 32 pulses per second. The timing varies as a function of how fast it is desired to perform the updating of the tune word in the fine tuning mode.
The maximum time limit is read from the ROM constant file into the B working register 274 and additionally loaded into the temporary storage RAM file 276 in memory location 3. The ROM constant file is read again for the UHF/time incrementing value and loaded into the B working register. Memory location 3 containing the maximum time limit is read into the A working register 266. Subtracting the contents of the B working register from the A working register is performed in a loop routine until register A has been decremented to a negative number. At this point the system will jump to 8 at address 22 where the increment value is again read from the temporary storage RAM file into the B working register and reading the latest updated tune words from the input data buffer 234 into the A working register. The A working register now contains the latest incremented or decremented tune word. The system would also jump out of the loop during the timing cycle if a channel interrupt indication was present at address 4A where the system would jump to 2 at address 88 to perform a normal write routine of the updated tune word into the nonvolatile memory.
The program will continue through the incrementing or decrementing of the tune word. In addition in the tune-up mode at address 50 the updated tune word is compared with the upper limit and in the tune-down mode at address 3D the updated tune work is compared with the lower tune limit. At these addresses if the system has gone beyond the upper tune limit or gone beyond the lower tune limit, a branch operation will be performed to read the tune-up input at address 53 or the tune-down input at 57 depending upon whether the system has been operating in a tune-up or tune-dow
n mode. In either case, the system will unconditionally branch
to 8 at address 22. During the sequence of operation the tune-up or tune-down indication is read twice. The purpose of the double read operation is to change the function of the input switch. Where the system was reading up we want the system to read down and where the system was reading down before we want the system to read up. This provides for an automatic reversing of direction during the AFC/off tuning of the TV. If during the AFC/off tuning in either the up mode or down mode exceeds the upper or lower limits, the system will automatically reverse direction and tune in the other direction.
If during a tuning mode the UHF tune switch is read in the on state at address EB, the system at address ED will branch to 9 which is the beginning of the UHF pot tune loop at address 94 at the beginning of the UHF coarse tuning mode. The ROM constant file is read for the UHF/time increment value and loaded into the B working register 274 and into the temporary storage RAM file 276 in the memory location 0. The ROM constant file is read again for the maximum time value which is loaded into the B working register and into the temporary storage RAM file at memory location 3. The ROM constant file is read again for the UHF/time increment value which is loaded into the B working register and into memory location 2 of the temporary storage RAM file.
In the UHF tuning mode a different rate of tuning is progra
mmed into the system.
The system starts off at a slow tuning rate then accelerates the tuning
rate as a function of time to allow tuning from one end of the tuning
band to the other end of the tuning band within a reasonable time yet
allow for the contingency of tuning initially at a slow rate if the
desired tune voltage is close to the starting point. The UHF/time
increment value is read from memory location 2 of the temporary storage
RAM file into the A working register and also the UHF/time increment
value is additionally read from the ROM constant file into the B working
register. These two UHF/time increment values in the A and B working
register are added together and the results stored in memory location 2
of the temporary storage RAM file. The maximum time for UHF tuning is
read from memory location 3 of the temporary storage RAM file into the B
working register. After a subtract operation of the updated UHF/time
increment value from the maximum tune time in the B working register, a
test operation at address A 1 is performed. If the maximum time value is
greater than the lapsed time, the system will read the input data
buffer register 234 which contains the tune word that is going to be
updated into the A working register. The input data buffer acts as a
temporary storage file during the tuning operation. In addition, the
UHF/time increment value is read out of memory location 0 of the
temporary storage RAM file into the B working register. The UHF/time
increment value has a 1 in the LSB position and zeros in all the other
bit positions. This is used to increment the tune word by 1 in the LSB
position. The UHF up/down control is read to determine the direction of
the UHF tuning. The UHF up/down input is fed from a comparator 282. The output of the comparator is compared with the actual tune voltage in the system. If the system is tuning in an up mode at address 86, the system will perform an add function which will add the contents of the B working register with the A working register and load it into the input data buffer 234 which will now contain an incremented UHF tune word. The UHF maximum tune value is read from the ROM constant file into the B working register and the updated tune word in the A working register is subtracted from it to determine if the updated tuning word has exceeded the UHF tuning limit. At this point it would be desired to stop the tuning in the up mode and reverse direction. If at address BF the test condition indicates that the maximum UHF tuning limit has been reached, the system will branch to 5 at address 04 which is a non-tuning mode.
If the maximum UHF tuning limit has not been reached, the system at address C0 will load the updated UHF tune word into the PWM logic latch 248. The next operation performed is a time out for UHF tuning. The maximum time value is read from the ROM constant into the B working register and read into memory location 1 of the temporary storage RAM file. The UHF/time increment value is read from the ROM and stored in the B working register. The maximum time value is read from the memory 1 of the temporary storage RAM file into the A working register 266. The UHF/time increment value from the B working register is subtracted from the maximum time value in the A working register. A test loop routine is provided at address C5 to continue the subtract operation of the UHF/time increment value from the maximum time until it is decremented to a neg
ative number. During the loop operation of the time out the channel interrupt select switch is read for a positive input whereby the system would branch to 2 at address 88 which is a normal write routine. If no channel interrupt is detected, the system will continue looping until a negative value is reached during the subtract operation, and the system will branch to 14 at address E6 which is the start of the pot up loop.
In an identical routine the system will perform UHF tuning in the down mode at address A7. Here the system checks the PWM word against the minimum UHF tuning limit that has been read from ROM and stored in working register B at address A9.
A time out routine is provided at address AE identical to the time out routine performed during the uptuning in the UHF mode. At the completion of the time out for the UHF tuning in the down mode, the system will branch to 15 at address DB which is the start of the pot down loop.
At address E6 the system will read the UHF up/down switch to determine whether the system is tuning in the up mode or down mode. If the system has detected that it is tuning in a down mode, it will branch to 7 at address 18 which is the start of the AFC off loop. If the system is continuing the UHF tuning in the up mode, the system will continue by reading the AFC on/off switch and branch to 2 at address 8A for normal write routine if the AFC is in the on position. If the AFC is in the off position the system will read the power on/off switch and branch to 4 at address 70 for a power off write routine if the power has been turned off. If the power has remained on, the system will branch to 13 at address 9A which is the start of the lapse time counter.
In a similar manner at address DB for the pot down loop the system will read the UHF up/down switch and if an up tuning mode is detected, the system will branch to 7 at address 18. If the system is continuing to tune in the down mode, then the system will continue with the sequence at address DE.
On completion of this loop in branching back to address 9A a complete cycle of updating the tune word has been completed for either the UHF up tuning of UHF downtuning.
In continuing a second loop at address 9A the UHF/time increment value will be incremented by its own value to provide a new UHF/time increment value which is double the original value. This new UHF/time increment value will be added to the previously updated UHF tune word which is stored in the input data buffer 234. Prior to the addition a test condition will determine whether or not the updated UHF/time increment value has exceeded the UHF maximum time value. If the UHF maximum time value has not been reached, the system will continue updating the tune word in a closed loop routine starting at address 9A. The updated tune word will be incremented by an increasing UHF/time increment value during each loop until the maximum time value has been reached. When the UHF maximum time limit has been reached at the test operation at address A1, the system will branch to address CD. This new loop routine provides a continuous incrementing or decrementing of the UHF tune word first at a slow rate and then upon each successive loop at an increa
sed rate by
increasing the value of the UHF/time increment value in the ROM constant
file. Once the UHF maximum time limit has been reached, the system will change the UHF tuning rate beginning as address CD. The subsequent routine provides a high speed bit weight update of the UHF/time increment value for increasing the rate of tuning. In addition, the maximum tuning time value is also increased. The UHF/time increment value is read from memory location 0 of the temporary storage RAM file into the A working register. At address CD an RSA 14 operation is performed. This function performs a right shift operation of the A working register by 1 bit. The UHF/time increment value is read from memory location 0 of the temporary storage RAM file into the B working register and is also right shifted by 1 bit. The contents of the A and B working registers are added together, and the result stored in memory location 0 of the temporary storage RAM file. This additional operation increases the UHF/time increment value by a factor of 2. This operation now provides a high speed bit weight update by employing the increased UHF/time increment value.
The maximum time value is read from memory location 3 of the temporary storage RAM file into the A working register. Working registers A and working registers B are right shifted 14 bits with a restore operation. The content of the A and B working registers are added together and stored in memory location 3 of the temporary storage RAM file. This addition of the two working registers results in a doubling of the UHF maximum time limit. Upon completion of the doubling of the UHF/time increment value and the UHF maximum time value, the system branches back to 12 at address 98 of the program. At this point tuning will be at double the UHF/time increment value and for double the maximum tune time.
The system will continue tuning through the program by testing for an up or down tuning direction at address 86 and checking the PWM word against the maximum UHF tuning limit during an up tuning mode and checking the PWM word against the minimum UHF tuning limit in a down tuning mode. If neither limits have been exceeded, the system will load the PWM data latch with the updated tuning word and perform a time out operation followed by a branch to either the pot up loop for up tuning or pot down loop for down tuning. In either case the loop will detect a change in tuning direction and if detected branch to 7 at address 18. If the system has not received a change in direction indication, it will continue by reading the AFC on/off and power on/off controls with a branch to 13 at address 98 if neither of the controls have been activated.
At this point the system will continue the loop routine through the lapse time counter and incrementing or decrementing the updated tune word until the lapse time counter has been decremented to a negative number where the system will branch to address CD. In this new loop the UHF/time increment value and the maximum tune time value will again be doubled, that is quadruple the original values stored in the ROM, and the system will continue tuning by branching to 12 at address 98. The sequence will be as previously described where the lapsed time counter routine will be performed with a new UHF/time increment value and maximum time value which will be double the previous value. This provides for a high speed bit weight update in the tuning of the UHF channel.
A binary word corresponding to each of the individ
ual VHF and UHF channels selected
may be programmed into the nonvolatile memory matrix by the manufacturer
of the system prior to sale. The binary tune word would correspond to
the nominal tune voltage of the corresponding channel. In the
alternative, however, the manufacturer may allow the ultimate user to
perform this function. In this instance the user would initially go
through the tuning mode for each channel selected until the tune voltage
is arrived at that satisfies the user's requirement. At this point the
tune word would be stored into the nonvolatile memory by one of the
write modes defined in the instruction set. Whereas the present invention has been described with respect to a specific embodiment thereof, it will be understood that various changes and modifications will be suggested to one skilled in the art, and it is intended to encompass such changes and modifications as fall within the scope of the appended claims.
No comments:
Post a Comment
The most important thing to remember about the Comment Rules is this:
The determination of whether any comment is in compliance is at the sole discretion of this blog’s owner.
Comments on this blog may be blocked or deleted at any time.
Fair people are getting fair reply. Spam and useless crap and filthy comments / scrapers / observations goes all directly to My Private HELL without even appearing in public !!!
The fact that a comment is permitted in no way constitutes an endorsement of any view expressed, fact alleged, or link provided in that comment by the administrator of this site.
This means that there may be a delay between the submission and the eventual appearance of your comment.
Requiring blog comments to obey well-defined rules does not infringe on the free speech of commenters.
Resisting the tide of post-modernity may be difficult, but I will attempt it anyway.
Your choice.........Live or DIE.
That indeed is where your liberty lies.
Note: Only a member of this blog may post a comment.