Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and information about some of the electronic, electrical and electrotechnical Obsolete technology relics that the Frank Sharp Private museum has accumulated over the years .
Premise: There are lots of vintage electrical and electronic items that have not survived well or even completely disappeared and forgotten.

Or are not being collected nowadays in proportion to their significance or prevalence in their heyday, this is bad and the main part of the death land. The heavy, ugly sarcophagus; models with few endearing qualities, devices that have some over-riding disadvantage to ownership such as heavy weight,toxicity or inflated value when dismantled, tend to be under-represented by all but the most comprehensive collections and museums. They get relegated to the bottom of the wants list, derided as 'more trouble than they are worth', or just forgotten entirely. As a result, I started to notice gaps in the current representation of the history of electronic and electrical technology to the interested member of the public.

Following this idea around a bit, convinced me that a collection of the peculiar alone could not hope to survive on its own merits, but a museum that gave equal display space to the popular and the unpopular, would bring things to the attention of the average person that he has previously passed by or been shielded from. It's a matter of culture. From this, the Obsolete Technology Tellye Web Museum concept developed and all my other things too. It's an open platform for all electrical Electronic TV technology to have its few, but NOT last, moments of fame in a working, hand-on environment. We'll never own Colossus or Faraday's first transformer, but I can show things that you can't see at the Science Museum, and let you play with things that the Smithsonian can't allow people to touch, because my remit is different.

There was a society once that was the polar opposite of our disposable, junk society. A whole nation was built on the idea of placing quality before quantity in all things. The goal was not “more and newer,” but “better and higher" .This attitude was reflected not only in the manufacturing of material goods, but also in the realms of art and architecture, as well as in the social fabric of everyday life. The goal was for each new cohort of children to stand on a higher level than the preceding cohort: they were to be healthier, stronger, more intelligent, and more vibrant in every way.

The society that prioritized human, social and material quality is a Winner. Truly, it is the high point of all Western civilization. Consequently, its defeat meant the defeat of civilization itself.

Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

OLD, but ORIGINAL, Well made, Funny, Not remotely controlled............. and not Made in CHINA.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

Every CRT Television saved let revive knowledge, thoughts, moments of the past life which will never return again.........

Many contemporary "televisions" (more correctly named as displays) would not have this level of staying power, many would ware out or require major services within just five years or less and of course, there is that perennial bug bear of planned obsolescence where components are deliberately designed to fail and, or manufactured with limited edition specificities..... and without considering........picture......sound........quality........
..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

Have big FUN ! !
-----------------------
©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All sets and apparates appearing here are property of Engineer Frank Sharp. NOTHING HERE IS FOR SALE !
All posts are presented here for informative, historical and educative purposes as applicable within Fair Use.


Sunday, May 1, 2011

BRIONVEGA TESI 4T TVC 26 YEAR 1981.











































THE BRIONVEGA TESI 4T TVC 26  IS A 26 Inches color television with remote and 24 programs preselection with PLL Synthesizer search tuning and channel direct call system.

This was the first BRIONVEGA employing a micro controller in the tuning control system to run a PLL synthesizer controlled by Ucontroller Unit and sophisticated circuitry to run special features.The tuning is capable of 99 channels PLL synthesized tune .tuning system which employs a frequency synthesizer system for establishing the tuning of the receiver. A programmable frequency divider counter is connected between the output of a reference oscillator and a phase comparator to which the output of the local oscillator in the tuner also is applied. The phase comparator output provides a tuning voltage for controlling the tuning of the local oscillator. A microprocessor is used to control the count of the programmable frequency divider and initially to set a count corresponding to the selected channel in a counter connected between the output of the local oscillator and the phase comparator. The tuning consists of three discrete time periods. First, a settling time to allow channel change transients to settle; second, a short period of forced search at a relatively rapid rate to insure proper tuning; and third, a slower rate of step-by-step correction to accomodate for station drift and the like during reception. This third time period is initiated either by the passage of a fixed length of time following the start of the forced search period or by sensing a preestablished number of changes of state in the output of the frequency discriminator during the forced/search period. A microcomputer control system is described for effecting channel tuning and function selection in a television receiver. The system will respond to commands entered by a set of controls at the television receiver or to remote control commands received at the television receiver. A channel number display is also provided whereby the channel number of a station currently tuned is displayed. A microprocessor within the system is programmed to validate control information received from an operator either by remotely generated commands or by controls located on the television receiver. Operator supplied information is processed and implemented by the microprocessor control system to effect control over the television receiver.
Microprocessor technology has recently provided circuit designers with a new basic design component. The microprocessor is capable of duplicating many functions heretofore realized with the use of large scale computer systems. The microprocessors have the advantage of being small, low power consumption devices capable of being programmed with instructions for executing mathematical algorithms on data supplied to the microprocessor. The microprocessor, when properly programmed, will execute a set of instructions providing output data during execution which may be used to control a process or apparatus.
The control of television receivers has heretofore required separate circuits for effecting channel selection, function selection and level setting, and remote control. With the microprocessor it has become possible to control these performance aspects with a single preprogrammed microprocessor and suitable input/output circuits. Data indicating the selection of a new channel to be tuned or a function to be controlled by an operator of the television receiver may be supplied to the input port of the microprocessor. This data may be supplied from a set of hand controls or a transducer for detecting remotely generated commands. Remote control systems presently incorporated in many television receivers provide operation of a television receiver by transmitting information bearing ultrasonic sound waves or infrared light waves to the television receiver. These waves when received at the television receiver are decoded into an electrical signal for effecting the change in channel tuning or function level. The microprocessor has the capability of validating this electrical signal and performing all decoding pursuant to preprogrammed instructions. These instructions, when executed by the microprocessor, generate a digital signal for effecting the desired channel change or function level change.

It has a Transistorized horizontal deflection circuits  made up of a horizontal switching or output transistor, a diode, one or more capacitors and a deflection winding. The output transistor, operating as a switch, is driven by a horizontal rate square wave signal and conducts during a portion of the horizontal trace interval. A diode, connected in parallel with the transistor, conducts during the remainder of the trace interval. A retrace capacitor and the deflection yoke winding are coupled in parallel across the transistor-diode combination. Energy is transferred into and out of the deflection winding via the diode and output transistor during the trace interval and via the retrace capacitor during the retrace interval.
In some television receivers, the collector of the horizontal output transistor is coupled to the B+ power supply through the primary windings of the high voltage transformer.
Furthermore it has even a clock feature with date and time and programmable timer features !

The set is build with a Modular chassis design because as modern television receivers become more complex the problem of repairing the receiver becomes more difficult. As the number of components used in the television receiver increases the susceptibility to breakdown increases and it becomes more difficult to replace defective components as they are more closely spaced. The problem has become even more complicated with the increasing number of color television receivers in use. A color television receiver has a larger number of circuits of a higher degree of complexity than the black and white receiver and further a more highly trained serviceman is required to properly service the color television receiver.
Fortunately for the service problem to date, most failures occur in the vacuum tubes used in the television receivers. A faulty or inoperative vacuum tube is relatively easy to find and replace. However, where the television receiver malfunction is caused by the failure of other components, such as resistors, capacitors or inductors, it is harder to isolate the defective component and a higher degree of skill on the part of the serviceman is required.
Even with the great majority of the color television receiver malfunctions being of the "easy to find and repair" type proper servicing of color sets has been difficult to obtain due to the shortage of trained serviceman.
At the present time advances in the state of the semiconductor art have led to the increasing use of transistors in color television receivers. The receiver described in this application has only two tubes, the picture tube and the high voltage rectifier tube, all the other active components in the receiver being semiconductors.
One important characteristic of a semiconductor device is its extreme reliability in comparison with the vacuum tube. The number of transistor and integrated circuit failures in the television receiver will be very low in comparison with the failures of other components, the reverse of what is true in present day color television receivers. Thus most failures in future television receivers will be of the hard to service type and will require more highly qualified servicemen.
The primary symptoms of a television receiver malfunction are shown on the picture tube of the television receiver while the components causing the malfunction are located within the cabinet. Also many adjustments to the receiver require the serviceman to observe the screen. Thus the serviceman must use unsatisfactory mirror arrangements to remove the electronic chassis from the cabinet, usually a very difficult task. Further many components are "buried" in a maze of circuitry and other components so that they are difficult to remove and replace without damage to other components in the receiver.
Repairing a modern color television receiver often requires that the receiver be removed from the home and carried to a repair shop where it may remain for many weeks. This is an expensive undertaking since most receivers are bulky and heavy enough to require at least two persons to carry them. Further, two trips must be made to the home, one to pick up the receiver and one to deliver it. For these reasons, the cost of maintaining the color television receiver in operating condition often exceeds the initial cost of the receiver and is an important factor in determining whether a receiver will be purchased.
Therefore, the object of this invention is to provide a transistorized color television receiver in which the main electronic chassis is easily accessible for maintenance and adjustment. Another object of this invention is to provide a transistorized color television receiver in which the electronic circuits are divided into a plurality of modules with the modules easily removable for service and maintenance. The main electronic chassis is slidably mounted within the cabinet so that it may be withdrawn, in the same manner as a drawer, to expose the electronic circuitry therein for maintenance and adjustment from the rear closure panel after easy removal. Another aspect is the capability to be serviced at eventually the home of the owner.
The set is sporting a PHILIPS 30AX CRT TUBE.The 30AX system, which Philips introduced in 1979, is an important landmark in the development of colour picture systems. With previous systems the assembly technician had to workthrough a large number of complicated setting-up procedures whenever he fitted a television picture tube with aset of coils for deflecting the electron beams. These procedures were necessary to ensure that the beams for the three colours would converge at thescreen for every deflection. They are no longer necessary with the 30AX system: for a given screen format any deflection unit can be combined  with any tube to form a single 'dynamically convergent' unit. A colour-television receiver can thus be assembled from its components almost as easily as a monochrome receiver. The colour picture tube of the PHILIPS 30AX system displays a noticeably sharper picture over the entire screen surface. This will be particularly noticeable when data transmissions such as Viewdata and Teletext are displayed. This has been achieved by a reduction in the size of the beam spot by about 30%. Absence of coma and the retention of the 36.5 mm neck diameter have both contributed to increased picture sharpness. Coma has been eliminated by means of corrective field shapers embedded in the deflection coils which are sectionally wound saddle types. The new deflection unit has no rear flanges. enabling uniform self-convergence to be obtained for all screen sizes. without special corrections, adjustments, or tolerance compensations. Horizontal raster distortion is reduced and no vertical correction is required. One of the inventions in 30AX is an internal magnetic correction system which obviates static convergence and colour purity errors. This enables the usual multiple unit to be dispensed with. together with the need for its adjustment !  New techniques have been employed to achieve close tolerance construction of the glass envelope. In addition, the 30AX picture tube incorporates two features whereby it can be accurately adjusted during the last stages of manufacture. One is the internal magnetic correction system. The other is an array of bosses on the cone that establish a precise reference for the axial purity positioning of the deflection unit on the tube axis and for raster orientation. During its manufacture, each deflection unit is individually adjusted for optimum convergence. The coil carrier also incorporates reference bosses that co-operate with those on the cone of the tube. ' Since every picture tube and every deflection unit is individually pre-aligned, any deflection unit automatically matches with any picture tube of the appropriate size. The deflection unit has only to be pushed onto the neck of the tube unit it seats. Once the reference bosses are engaged, the combination is accurately aligned and requires no adjustment for convergence, colour purity or raster orientation. With no multiple unit and a flangeless deflection unit, there is more space in the receiver cabinet. Higher deflection sensitivity means that less current is consumed, and consequently less heat is produced. This increases the reliability of the TV receiver again. 30AX means simple assembly. Any picture tube is compatible with any deflection unit of the appropriate size and is automatically self-aligning as well as being self-convergent.

The well-known 20AX features of HI-Bri, Soft-Flash and Quick-vision are maintained in the new 30AX systern.  In their work on the design of deflection coils in the last few years the developers have expanded  the magnetic deflectionfields into 'multipoles', This approach has improved the understanding  of the relations between coil and field and between field and deflection to such an extent that  designing deflection units is now more like playing a difficult but fascinating game of chess than  carrying out the obscure computing procedure once necessary.

The original remote controller here shown can be fitted in a front compartment after use to prevent dropping after use.


Brionvega is (was) an Italian electronics company, established in Milan in 1945.

Vega, BP Radio, Brionvega, Brion & Pajetta; Milano, Lissone (MI) (I)
Abbreviation: vega
Products: Model types
Summary: Society B.P.M. (1945) Vega - BP Radio (Fabbrica Apparecchi e Accessori Radio, Perito Ind. Brion & Ing. Pajetta)
Via Pacini 59, Milano (1948)
Via Ampère 61, Milano (ca. 1950)
Brionvega Formenti Sèleco Spa
Via Dante Alighieri 43, 20035 Lissone / MI

Good design is no longer simply for an "elite" but is demanded by a far wider audience interested in continuous development.With so many designs and products available, how is it possible to distinguish a truly outstanding design from one that is simply trendy. World famous designers: Hannes Wettstein, Mario Bellini, Richard Sapper, Marco Zanuso, Castiglioni brothers and Ettore Sottsass, have tried to come up with the answer to what constitutes the perfect design. In finding inspiration, when designing for Brionvega, these people look beyond every day fashion and look for examples which are outstanding in their beauty. They also pay attention to people's attitude and how they relate to everyday objects.


Historically speaking, Brionvega is one of the most famous radio and Television manufacturers, thanks to its products, born from the collaboration with well-known design firms. Over the years, from its establishment, Brionvega has made some industrial design corner-stones, such as the radio "cube" TS502 from 1963, the Algol and Doney portable TV, and the radio-phonograph RR126.

 The company was founded in 1945 by Giuseppe Brion and engineer Pajetta. Initially called B.P.M. Company and manufacturing electronic components, the business became known as Brionvega in 1960. In the early 1960s, two unusually designed portable television sets, designed by Marco Zanuso and Richard Sapper, were launched by Brionvega by the names "Doney" (1962) and "Algol" (1964).

Brionvega became famous for a number of exceptional designs (algol, doney, ts502, rr126). A few of their designs found their way into the Museum of Modern Art (MoMA), New York.
2007 DONEY CVT set ( V.Cometti) numbered edition, ALGOL CVT set (V.Cometti) numbered edition,
ALPHA LCD CVT set (V.Cometti)

2002 TVC DOGE 32" (M.Bellini)
1992 GLASS CUBE CVT set (M.Bellini) crystal cubic-shaped television
1992 25" and 28" QUADRO CTV set (M.Bellini) forerunners of the flat screens
1990 15" BEST CTV set (M.Bellini) with triangular rear case
1989 11" ALGOL CTV set (M.Zanuso) newly designed
1988 SINTESI CTV set (R.Lucci-P.Orlandini) with the characteristic orientable loudspeakers
1983 26" CORO PANSOUND CTV set (R.Lucci-P.Orlandini)
1980 23" MEMPHIS CTV set (E.Sottsass) limited series
1980 20" LED CTV set (M.Bellini)
1979 26" ALTA FEDELTA' CTV set (M.Bellini) high audio performance technology
1978 15" MONITOR TV Set (M.Bellini) whose packaging will serve as model for the manufacturing of future PC monitors
1978 15" MONITOR TV Set (M.Bellini) whose packaging will serve as model for the manufacturing of future PC monitors
1969 17" VOLANS TV Set (M.Bellini)
1969 BLACK ST 201 TV Set (M.Zanuso-R.Sapper) first small size TV set designed to be a decorative piece
1968 ASTER TV Set (M.Bellini) sculptural, audio devices in the base
1967 12" DONEY TV Set (M.Zanuso-R.Sapper) evolution of the 14" version
1964 19" SIRIUS TV Set (M.Zanuso)
1964 11" ALGOL TV Set (M.Zanuso-R.Sapper) on display at the MoMA in New York.
1962 14" DONEY TV Set (M.Zanuso-R.Sapper)first transistor portable TV set in Europe, awarded with the Compasso d'Oro.
1961 23" ORION TV Set (M.Albini-F.Helg)
1959 23" CRISTALLO TV Set (R.Bonetto)
1954 Television is becoming widespread.
1945 Giuseppe Brion and engineer Pajetta found the B.P.M. company (initially electronic components), which in the 1960's will become Brionvega, specialized in TV sets.

The BRIONVEGA stylish design is well recognized around the world for it's particularity.
The television here in collection The TESI 4T TVC 26 is a clear example of that style.

References:

^ "Ex Sèleco a un imprenditore udinese", Articolo del Messaggero Veneto del 18 febbraio 2010

"Brionvega History". Brionvega.tv. Retrieved 18 February 2012.
  "2008 Brionvega reissues". brionvega.tv.
 
"Cuboglass TV History". brionvega.it.


 

No comments:

Post a Comment

The most important thing to remember about the Comment Rules is this:
The determination of whether any comment is in compliance is at the sole discretion of this blog’s owner.

Comments on this blog may be blocked or deleted at any time.
Fair people are getting fair reply. Spam and useless crap and filthy comments / scrapers / observations goes all directly to My Private HELL without even appearing in public !!!

The fact that a comment is permitted in no way constitutes an endorsement of any view expressed, fact alleged, or link provided in that comment by the administrator of this site.
This means that there may be a delay between the submission and the eventual appearance of your comment.

Requiring blog comments to obey well-defined rules does not infringe on the free speech of commenters.

Resisting the tide of post-modernity may be difficult, but I will attempt it anyway.

Your choice.........Live or DIE.
That indeed is where your liberty lies.

Note: Only a member of this blog may post a comment.